25.160.30 焊接设备 标准查询与下载

24/30470975 DC BS ISO 11872 气焊设备 高压乙炔分解阻滞剂

BS ISO 11872 Gas welding equipment — Decomposition blockers for high-pressure acetylene

24/30483101 DC BS ISO 22073-1 气焊设备 第1部分：管线压力调节器和带流量计量装置的管线压力调节器 用于压力高达 60 bar (6 MPa) 的气体分配管道

BS ISO 22073-1 Gas welding equipment - Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 60 bar (6 MPa)

T/CMEPCA 001-2024 质量分级及“领跑者”评价要求 焊接设备

本文件规定了焊接设备产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分。

Assessment requirements for quality grading and forerunner — Welding equipment

JB/T 14665-2023 数控激光拼焊机床 技术规范

Technical Specifications for CNC Laser Tailor Welding Machine Tools

KS C IEC 60974-1-2023 弧焊设备第1部分:焊接电源

Arc welding equipment — Part 1: Welding power sources

KS C IEC 60974-4-2023 弧焊设备第4部分:定期检验和试验

Arc welding equipment — Part 4: Periodic inspection and testing

T/QGCML 2515-2023 钢管焊接支撑装置

本文件规定了钢管焊接支撑装置的产品结构、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于支撑钢管口对接定位的钢管焊接支撑装置。

Steel pipe welding support device

KS C 9974-10-2023 弧焊设备第10部分:电磁兼容性（EMC）要求

Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements

BS EN ISO 9012:2023 气焊设备 吸气式手吹管 规格和测试

1   Scope This document specifies requirements and test methods for air-aspirated hand blowpipes . This document applies to blowpipes for brazing, soldering, heating, fusion and other allied thermal processes which use a fuel gas and aspirated air (injector-type blowpipes) and are intended for manual use. This document is applicable to: — air-aspirated hand blowpipes which are fed with a fuel gas in the gaseous phase, at a controlled pressure by a regulator, through a gas supply hose; — air-aspirated hand blowpipes which are fed with a liquefied fuel gas in the gaseous phase at the container pressure, through a gas supply hose; — so-called liquid-phase blowpipes which are fed with a fuel gas in the liquid phase, and where thermal evaporation takes place within the blowpipe. It does not apply to blowpipes in which the fuel gas leaves the injector in the liquid phase, or to so-called “cartridge” blowpipes where the gas supply is fixed directly onto the blowpipe and possibly constitutes the shank. NOTE Figures 1 to 4 are given for guidance only, to facilitate the explanation of the terms. They do not specify the construc...

Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests

T/QGCML 2220-2023 超声波六轴机器人焊接设备

本文件规定了超声波六轴机器人焊接设备的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。  本文件适用于超声波六轴机器人焊接设备的生产、检验与验收工作。

Ultrasonic six-axis robot welding equipment

T/SXS 021-2023 电解槽产品激光焊接自动化技术

本文件规定了电解槽产品激光焊接自动化技术的术语和定义、基本要求、激光焊接要求、焊接质量 检验、焊接管理、焊接记录。 本文件适用于电解槽产品激光焊接自动化技术。

Automatic technology of laser welding for electrolytic cell products

T/QGCML 1892-2023 发动机料架焊接夹具

本文件规定了发动机料架焊接夹具的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。  本文件适用于发动机料架焊接夹具的生产、检验与验收工作。

Engine material rack welding fixture

T/QGCML 1813-2023 汽车座椅滑轨焊接工装

本文件规定了汽车座椅滑轨焊接工装的术语和定义、构成及原理、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于汽车座椅滑轨焊接工装的生产及检验。

Car seat slide rail welding tooling

T/QGCML 1784-2023 SMT贴片焊接用贴片装置

本文件规定了SMT贴片焊接用贴片装置的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于SMT贴片焊接用贴片装置的生产及检验。

SMT patch welding device

T/SDZBZZ 003-2023 平板对接自动焊接机

本文件规定了平板对接自动焊接机的术语和定义、功能及组成结构、型号和参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本文件适用于罐式车生产用两块等截面平面金属板材的自动拼对及焊接的平板对接自动焊接机

Flat plate docking automatic welding machine

CSA C22.2 No.60974-5-2023 弧焊设备 第5部分：送丝机 弧焊设备 第5部分：送丝机

1 Scope This part of IEC 60974 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. This document is applicable to WIRE FEEDERS and to WIRE-FEED CONTROLS that are stand-alone (separate from the welding equipment), housed together in a single enclosure or housed in a single enclosure with other welding equipment. The WIRE FEEDER can be suitable for manually or mechanically guided torches. This document is not applicable to spool-on torches, which are covered by IEC 60974-7. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This document does not include electromagnetic compatibility (EMC) requirements, which are given in IEC 60974-10. This Standard applies to equipment intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. General requirements applicable to these products are provided in CSA C22.2 No. 0.

Arc welding equipment — Part 5: Wire feeders Matériel de soudage à l’arc — Partie 5 : Dévidoirs

T/ZAWS 002-2023 弧焊设备 物联控制终端（模组）技术要求

本文件规定了弧焊设备中物联控制终端（模组）技术要求的分类与命名、基本要求、技术要求、检验方法、检验规则、安装要求、标志、使用说明书、包装、运输、贮存和质量承诺。

Welding Equipment Technical Requirements for IoT Control Terminals (Modules)

T/QGCML 1507-2023 精密激光焊接工装治具工艺规范

本文件规定了精密激光焊接工装治具工艺规范的术语和定义、技术要求、试验方法、检验规则、标志、包装运输和贮存。 本文件适用于精密激光焊接工装治具的生产及检验。

Precision laser welding tooling and fixture process specifications

T/QGCML 1282-2023 充电型风管保温钉焊机

本文件规定了充电型风管保温钉焊机的产品型号和参数、环境条件、技术要求、试验方法、检验规则、标志、随机文件、包装、运输、贮存、保修期限等内容。 本文件适用于充电型风管保温钉焊机（以下简称“焊机”）的生产与检验。

Rechargeable air duct insulation nail welding machine

T/CWAN 0081-2023 激光焊接机器人系统通用技术条件

本文件规定了激光焊接机器人系统（工作站）的分类、主要性能参数、技术要求、试验规则、标志、包装储运等内容。 本文件适用于采用激光焊接机器人作为执行机构的激光焊接系统（工作站）。

General technical requirements for laser welding robot system