25.160.30 焊接设备 标准查询与下载
共找到 1505 条与 焊接设备 相关的标准，共 101 页
Resistance spot welding — Electrode adaptors, female taper 1：10
- ICS
- 25.160.30
- CCS
- 发布
- 2022-12-19
- 实施
Gas welding equipment Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
- ICS
- 25.160.30
- CCS
- 发布
- 2022-12-19
- 实施
Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes
- ICS
- 25.160.30
- CCS
- 发布
- 2022-12-19
- 实施
本文件规定了手工射吸式割炬的术语和定义、 型号和结构、 基本要求、 技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量文件及质量承诺。 本文件适用于切割厚度范围在 310 mm 以内的手工射吸式割炬（以下简称“割炬” ） 。
Manual lnjection cutting torches
- ICS
- 25.160.30
- CCS
- C342
- 发布
- 2022-12-08
- 实施
- 2023-03-24
Common Mod in order to cover EU Ecodesign requirements on IEC 60974-1 It is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.
Arc welding equipment - Part 1: Welding power sources
- ICS
- 25.160.30
- CCS
- 发布
- 2022-12-02
- 实施
- 2023-04-25 (7)
This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for INDUSTRIAL AND PROFESSIONAL USE, and supplied by a voltage not exceeding 1 000 V, BATTERY supplied or driven by mechanical means. This document specifies safety and performance requirements of WELDING POWER SOURCES and PLASMA CUTTING SYSTEMS. This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6. This document includes requirements for battery-powered WELDING POWER SOURCES and BATTERY packs, which are given in Annex O. This document is not applicable to testing of power sources during periodic maintenance or after repair. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 AC systems having a nominal voltage between 100 V and 1 000 V are given in Table 1 of IEC 60038:2009. NOTE 3 This document does not include electromagnetic compatibility (EMC) requirements.
Arc welding equipment - Part 1: Welding power sources
- ICS
- 25.160.30
- CCS
- 发布
- 2022-12-02
- 实施
- 2023-04-25 (7)
Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-30
- 实施
Arc welding equipment — Part 3: Arc striking and stabilizing devices
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-30
- 实施
1 Scope This document establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems up to 2,5 MPa (25 bar) 1 as defined in ISO 14114. It does not apply to high-pressure piping, high-pressure flexible hoses or pressure regulators.
Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-30
- 实施
- 2022-11-30
Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-30
- 实施
Arc welding equipment — Part 3: Arc striking and stabilizing devices
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-30
- 实施
This document establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems up to 2,5 MPa (25 bar) as defined in ISO 14114. It does not apply to high-pressure piping, high-pressure flexible hoses or pressure regulators.
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2022)
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-16
- 实施
- 2023-02-28
Arc welding equipment — Part 2: Liquid cooling systems
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-03
- 实施
Arc welding equipment — Part 2: Liquid cooling systems
- ICS
- 25.160.30
- CCS
- 发布
- 2022-11-03
- 实施
Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices
- ICS
- 25.160.30
- CCS
- 发布
- 2022-10-26
- 实施
本文件规定了无电切割设备的术语和定义、构成及原理、要求、试验方法、检验规则、标识、包装、运输及贮存。 本文件适用于无电切割设备的生产及检验。
Electric Cutting Equipment
- ICS
- 25.160.30
- CCS
- C342
- 发布
- 2022-10-20
- 实施
- 2022-10-20
本文件规定了无电焊接设备的术语和定义、构成及原理、要求、试验方法、检验规则、标识、包装、运输及贮存。 本文件适用于无电焊接设备的生产及检验。
Electroless Welding Equipment
- ICS
- 25.160.30
- CCS
- C342
- 发布
- 2022-10-20
- 实施
- 2022-10-20
Gas welding equipment — Pressure gauges used in welding, cutting and allied processes
- ICS
- 25.160.30
- CCS
- 发布
- 2022-10-04
- 实施
Gas welding equipment — Pressure gauges used in welding, cutting and allied processes
- ICS
- 25.160.30
- CCS
- 发布
- 2022-10-04
- 实施
本文件规定了便携式直流手工电弧焊机的型号、基本参数、使用条件、技术要求、检验方法、检验规则、标识、使用说明书、包装、运输和贮存。
Portable DC manual arc welding machine
- ICS
- 25.160.30
- CCS
- C342
- 发布
- 2022-08-19
- 实施
- 2022-08-19
