共找到 1505 条与 焊接设备 相关的标准,共 101 页
本文件规定了全自动焊丝层绕机(以下简称:层绕机)的术语和定义、结构、技术要求、检验方法、检验规则、标志、包装、运输与贮存要求。 本文件适用于全自动焊丝层绕机。
General specification for automatic wire winding machine
Manual blowpipes for welding, cutting and heating
Arc welding equipment — Part 6: Limited duty equipment
Arc welding equipment — Part 6: Limited duty equipment
4 技术要求 5 试验方法 6 检验规则 7 标志、包装、运输和贮存
Technical specification for inverter welding machines
IEC 60974-10:2014 specifies a) applicable standards and test methods for radio-frequency (RF) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inclusion of optional use of a decoupling network and a load outside the test chamber; - inclusion of an alternative test setup for portable equipment; - inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices; - update of the applicable limits related to the updated reference to CISPR 11; - exclusion of the use of narrow band relaxations for RF emission limits; - update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12; - update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34; - update of the informative annex for installation and use; - inclusion of symbols to indicate the RF equipment class and restrictions for use.
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
IEC 62135-2:2020 is available as IEC 62135-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62135-2:2020 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V AC RMS. This document does not define safety requirements. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of the applicable limits related to the updated references; - implementation of radiated magnetic field requirements.
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
规定了门式纵梁焊接机的技术要求、试验方法、检验规则、标志、包装、运输、贮存和使用说明书。
Portal Stringer Welding Machine
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
Arc welding equipment - Part 12: Coupling devices for welding cables (IEC 26/728/CDV) (english version)
本文件规定了手动一体化焊钳的术语和义、 分类基本参数与使用条件、 要求技术要求、 试验方法、检规则使用说明书铭牌包装运输和贮存及质量承诺。 本文件适用于单/三相交流380 V,频率50 Hz或60 Hz手动一体化焊钳(以下简称“焊钳”)。
Manual welding guns with integrated transformer
Electrofusion welding machines for polyethylene pipes and/or fitting joints by means of electro-weldable fittings, for the transport of fuel gas, water and other pressurized fluids - Characteristics and requirements, tests, maintenance and documentation
This document specifies the characteristics and dimensions of projections for resistance welding; it also includes the appropriate design and dimensions for tools. The projections may be used on either hot-rolled or cold-rolled, uncoated mild steel, of conventional welding qualit
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021); German version EN ISO 8167:2021
Resistance welding equipment -- Water-cooled secondary connection cables (ISO 8205:2021)
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
本文件规定了多割炬可调式数控切割机 (以下简称切割机)的术语和定义、结构型式与参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于以火焰、等离子为热源的,多割炬可调的数控式切割机,其他热源的切割机可参照执行。
Multi-torch adjustable CNC cutting machine
Resistance welding equipment - Water-cooled secondary connection cables (ISO 8205:2021)
Arc welding equipment — Part 11: Electrode holders
Arc-welding equipment — Part 12: Coupling devices for welding cables
Arc welding equipment - Part 13: Welding current return clamp (IEC 60974-13:2021)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号