25.180.10 电炉 标准查询与下载

KS C IEC 60519-11-2022 电热装置的安全 第11部分：利用电磁力作用于液态金属的装置的特殊要求

Safety in electroheat installations－Part 11：Particular requirements for installations using the effect of electromagnetic forces on liquid metals

KS C IEC 60519-7-2022 电热装置的安全 第7部分：电子枪装置的特殊要求

Safety in electroheat installations－Part 7：Particular requirements for installations with electron guns

KS C IEC 60519-9-2022 电热装置的安全 第9部分：高频介质加热装置的特殊要求

Safety in electroheat installations－Part 9：Particular requirements for high-frequency dielectric heating installations

KS C IEC 60703-2022 电子枪电加热装置的试验方法

Test methods for electroheating installations with electron guns

KS C IEC 60519-8-2022 电热装置安全 第8部分：电渣重熔炉的特殊要求

Safety in electroheat installations－Part 8：Particular requirements for electroslag remelting furnaces

KS C IEC 60779-2022 工业电热设备 电渣重熔炉试验方法

Industrial electroheat equipment－Test methods for electroslag remelting furnaces

KS C IEC 61307-2022 工业微波加热装置 功率输出测定试验方法

Industrial microwave heating installations－Test methods for the determination of power output

KS C IEC 60519-3-2022 电热装置的安全 第3部分：感应和传导加热以及感应熔化装置的特殊要求

Safety in electroheat installations－Part 3：Particular requirements for induction and conduction heating and induction melting installations

BS EN IEC 60519-4:2021 电加热和电磁处理装置的安全 电弧炉安装的特殊要求

1   Scope This clause of Part 1 is replaced by the following. Replacement: This part of IEC 60519 provides particular safety requirements for arc furnace installations. This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial arc furnace installations, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse. This document specifies the requirements intended to be met by the manufacturer to ensure the safety of persons and property during the complete life cycle of the equipment from design through commissioning, operation, maintenance, inspection, to decommissioning, as well as in the event of foreseeable single fault condition that can occur in the equipment. The rated voltage of arc furnace installation can be in the range of low voltage or high voltage, details are given in 4.2. This standard is applicable to arc furnace installations such as: a) furnaces for direct arc heating, forming arcs between the electrode and metal such as the electric arc furnace using alternating current ( EAF AC ) or direct current ( EAF DC ), and the ladle fur...

Safety in installations for electroheating and electromagnetic processing. Particular requirements for arc furnace installations

EN IEC 60519-4:2022 电热和电磁加工装置的安全性 第4部分：电弧炉装置的特殊要求

This part of IEC 60519 provides particular safety requirements for arc furnace installations. This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial arc furnace installations, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse. This document specifies the requirements intended to be met by the manufacturer to ensure the safety of persons and property during the complete life cycle of the equipment from design through commissioning, operation, maintenance, inspection, to decommissioning, as well as in the event of foreseeable single fault condition that can occur in the equipment. The rated voltage of arc furnace installation can be in the range of low voltage or high voltage, details are given in 4.2. This standard is applicable to arc furnace installations such as: a) furnaces for direct arc heating, forming arcs between the electrode and metal such as the electric arc furnace using alternating current (EAF AC) or direct current (EAF DC), and the ladle furnace (LF); b) furnaces for arc-resistance heating forming arcs between the electrode and the charge material or heating the charge material by the Joule effect, such as the submerged arc resistance furnace using alternating current (SAF AC), or direct current (SAF DC). NOTE In some documents the terms smelter or electrical reduction furnace are used. Furnace installation for unattended operation is not covered by this standard. This document does not provide requirements for type testing. NOTE Industrial equipment covered by this document is typically produced as a single unit or a very small number of units; such unit usually has a very high value and can cause severe harm at disintegration. This document does not address data security and hazards arising from neglect of security. With respect to noise of electrical an arc furnace, ISO 13578:2017, 6.1.23 applies.

Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

T/CES 090-2022 感应加热型集中电供热装置技术要求

（1）范围 本标准规定了感应加热型集中电供热装置的组成部分、技术要求、调试项目、安全要求等。 本标准适用于流量在2t/h以上、功率在200kW及以上的感应加热型集中电供热装置的设计、生产制造、安装、调试等。 （2）规范性引用文件 （3）术语和定义 包括感应加热、变频电源、主循环系统、启动功率、控制目标、运行计划、加热曲线等术语和定义。 （4）组成部分和技术要求 感应加热型集中电供热装置由控制系统、电源、加热体、循环系统、过滤系统、定压补水系统、测量系统组成。 技术要求主要包括：控制系统、电源、加热体、循环系统、过滤系统、定压补水系统、测量系统、管路切换系统的基本要求等。 （5）调试项目和要求 主要包括电气绝缘性测试、各电器组件的单独运行检验、变频电源的检验、加热系统的校验以及云端控制系统的检验（可选）等。 （6）安全要求 主要包括防火、防水、过热、过压要求等。

Technical requirements for induction heating type centralized electric heating device

IEC 60519-6:2022 电热和电磁处理装置的安全第6部分:高频电介质和微波加热和处理设备的特殊要求

Safety in installations for electroheating and electromagnetic processing - Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment

IEC 60519-4:2021 电热和电磁处理装置的安全.第4部分:电弧炉装置的特殊要求

Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

KS C IEC 61922-2021 高频感应加热装置 发电机功率输出测定试验方法

High-frequency induction heating installations－Test methods for the determination of power output of the generator

KS C IEC 60680-2021 电热应用等离子设备的方法

The methods of plasma equipment for electroheat applications

KS C IEC 60683-2021 矿热炉试验方法

Test methods for submerged-arc furnaces

KS C IEC 60676-2021 工业电加热设备 直接电弧炉试验方法

Industrial electroheating equipment－Test methods for direct arc furnaces

KS C IEC 60239-2021 电弧炉用石墨电极 尺寸和名称

Graphite electrodes for electric arc furnaces－Dimensions and designation

KS C IEC 60519-4-2021 电热装置的安全 第4部分：电弧炉装置的特殊要求

Safety in electroheat installations－Part 4：Particular requirements for arc furnace installations

IEC 60050-841:2004/AMD1:2021 修正案 1 国际电工词汇（IEV） 第841部分：工业电热

Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 841: Industrial electroheat