25.220.10 标准查询与下载

KS M ISO 11127-6:2021 涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第6部分:通过电导率测量测定水溶性污染物

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond

KS M ISO 11125-4-2021 涂料和相关产品使用前钢衬底的制备.金属喷砂清理磨料的试验方法.第4部分:表观密度的测定

Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determination of apparent density

KS M ISO 11127-4:2021 涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第4部分:通过玻片试验评估硬度

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test

KS M ISO 11126-10:2021 涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料规范.第10部分:铁铝榴石

Preparation of steel substrates before application of paints and related products — Specification for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet

KS M ISO 11125-2:2021 涂料和相关产品使用前钢衬底的制备.金属喷砂清理磨料的试验方法.第2部分:粒度分布的测定

Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution

KS M ISO 11126-1-2021 涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料规范.第1部分:一般介绍和分类

Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification

KS M ISO 8503-2-2021 涂料和相关产品使用前钢衬底的制备.喷砂清理钢衬底的表面粗糙度特性.第2部分:喷砂清理钢表面轮廓的分级方法.比较程序

Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface prof

DS/EN ISO 11124-5:2021 涂装油漆和相关产品前钢材基材的制备《金属喷砂清理磨料规范》第5部分：切割钢丝（ISO 11124-5:2019）

Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 5: Cut steel wire (ISO 11124-5:2019)

OENORM EN ISO 8501-4:2021 涂漆和相关产品前钢基材的准备 表面清洁度的目视评估 第4部分：与水喷射有关的初始表面条件、准备等级和闪锈等级（ISO 8501-4:2020）

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020)

OENORM EN ISO 3861:2021 喷砂和喷砂用橡胶软管和软管组件 规范（ISO 3861:2021）

Rubber hoses and hose assemblies for sand and grit blasting - Specification (ISO 3861:2021)

UNI EN ISO 3861:2021 喷砂和喷砂用橡胶软管和软管组件规范

Rubber hoses and hose assemblies for sand and grit blasting - Specification

PN-EN ISO 8501-4-2021-04 E 涂漆和相关产品前钢基材的准备 表面清洁度的目视评估 第4部分：与水喷射相关的初始表面条件、准备等级和闪锈等级（ISO 8501-4:2020

Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020

UNI EN ISO 8501-4:2021 涂漆和相关产品前钢基材的准备-表面清洁度的目视评估-第4部分：与水喷射有关的初始表面条件、准备等级和闪锈等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting

SN EN ISO 8501-4:2021 涂漆和相关产品前钢基材的准备 表面清洁度的目视评估 第4部分：与水喷射有关的初始表面条件、准备等级和闪锈等级（ISO 8501-4:2020）

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020)

PN-EN ISO 11127-4-2021-03 E 涂料及相关产品涂装前钢材表面处理非金属喷砂清理磨料试验方法第4部分：玻璃载玻片硬度评定（ISO 11127-4:2020）

Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)

UNI EN ISO 11127-4:2021 涂漆和相关产品前钢基材的准备 非金属喷砂清理磨料的试验方法 第4部分：通过载玻片试验评估硬度

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test

PN-EN ISO 8502-9-2021-03 E 涂装油漆和相关产品前钢基材的准备 表面清洁度评估试验 第9部分：水溶性盐类电导测定的现场方法（ISO 8502-9:2020）

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)

BS EN ISO 11127-1:2021 涂料和其它相关制品应用前钢基质的预处理 喷非金属清理磨料试验方法 制样

Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling

DS/ISO 11127-2:2021 涂装油漆和相关产品前钢材表面的准备 非金属喷砂清理磨料的试验方法 第2部分：粒度分布的测定

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 2: Determination of particle size distribution

DS/EN ISO 11127-3:2021 涂装油漆和相关产品前钢材表面的准备 非金属喷砂清理磨料的试验方法 第3部分：表观密度的测定（ISO 11127-3:2021）

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent density (ISO 11127-3:2021)