25.220.40 标准查询与下载

GSO ISO 19477:2021 金属和其他无机涂层 通过梁弯曲测量热障涂层的杨氏模量

ISO 19477:2016 specifies a method for measuring the in-plane Young's modulus, at room temperature, of thermal barrier coatings formed on substrates by thermal spraying.

Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barrier coatings by beam bending

GSO ISO 19487:2021 金属和其他无机涂层 电沉积镍陶瓷复合涂层

ISO 19487:2016 specifies the requirements for electrodeposited nickel-ceramics composite coatings applied to ferrous and non-ferrous basis metals for engineering purposes. In addition, it enables both providers and users to offer a consistent methodology to fabricate electrodeposited nickel-ceramics composite system. Nickel alloys or composites in which nickel content is less than 40 vol.% are outside the scope of this document. The designation provides a means of specifying the type of nickel composite coatings appropriate for engineering applications.

Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings

SN EN ISO 4518:2021 金属涂层 涂层厚度的测量 轮廓法（ISO 4518:2021）

Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)

DIN EN 13603:2021 铜和铜合金 评估电工用拉制圆铜线上保护性锡涂层的试验方法；德文版 EN 13603:2021

This document specifies methods for assessing the tin coating on drawn round copper wire for the manufacture of electrical conductors, e. g. according to EN 13602.This European Standard includes test methods for the determination of the following characteristics:a) thickness of t

Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2021

DIN EN ISO 4518:2021 金属涂层 涂层厚度的测量 轮廓法（ISO 4518:2021）；德文版 EN ISO 4518:2021

This document specifies a method for the measurement of metal coating thickness.

Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021); German version EN ISO 4518:2021

UNI EN 13603-2021 铜和铜合金 评估电工用拉制圆铜线上保护性锡涂层的试验方法

Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes

DS/EN 13603:2021 铜和铜合金 - 评估电气用拉制圆铜线上的保护性锡涂层的试验方法

Copper and copper alloys – Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes

UNI EN ISO 4518:2021 金属涂层 涂层厚度的测量 轮廓法

Metallic coatings - Measurement of coating thickness - Profilometric method

ISO 1463:2021 金属和氧化物涂层 - 涂层厚度测量 - 显微镜法

This document specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by the microscopical examination of cross-sections using an optical microscope.

Metallic and oxide coatings — Measurement of coating thickness — Microscopical method

DS/ISO 4518:2021 金属镀层 镀层厚度的测量 轮廓法

Metallic coatings – Measurement of coating thickness – Profilometric method

DS/EN ISO 4518:2021 金属涂层 涂层厚度的测量 轮廓法（ISO 4518:2021）

Metallic coatings – Measurement of coating thickness – Profilometric method (ISO 4518:2021)

ASTM B545-13(2021) 锡的电沉积涂层标准规范

Standard Specification for Electrodeposited Coatings of Tin

ASTM A239-21 定位锌中最薄点的标准做法

1.1 This practice covers the procedure for locating, by the use of a solution of copper sulfate, the thinnest spot in a zinc coating (hot dipped, electroplated, or sprayed) on iron or steel articles that are coated after the shape is produced by casting, drawing, pressing, or other forming methods. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

ASTM A90/A90M-21 用锌或锌合金涂层的钢铁制品涂层重量[质量]的标准试验方法

1.1?This test method covers procedures for determining the weight [mass] of coating on iron or steel sheet, wire, and other articles in which the coating is zinc or a zinc alloy, such as zinc-5 % aluminum (including zinc-5 % aluminum-mischmetal and zinc-5 % aluminum-0.1 % magnes

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

OENORM EN ISO 9220:2021 金属镀层-镀层厚度的测量-扫描电子显微镜法（ISO/DIS 9220:2021）

Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

ASTM A1073/A1073M-21 使用手动千分尺测量未涂覆钢板和非金属和金属涂层钢板厚度的标准做法

1.1?This practice covers definitions and procedures for measuring the thickness of uncoated steel sheet and nonmetallic and metallic-coated steel sheet. The methods described are designed and intended for use in both laboratory and plant situations and their environments. 1.2?T

Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet

ASTM A428/A428M-21 镀铝铁或钢制品上涂层重量[质量]的标准试验方法

1.1 This test method covers procedures for determining the weight [mass] of coating on aluminum-coated iron or steel sheets and wire, and on other aluminum-coated iron and steel articles. 1.2 Units—The final results determined by this test method shall be expressed in inch-pound units or SI units, depending on the units used in the material specification to which the results are to be compared. Certain portions of the procedure involving determination of specimen weight [mass] have traditionally been performed in SI units, and corresponding inch-pound units are not included. 1.3 For sheet products, the final results are expressed as either coating weight [mass] total both sides, or coating weight [mass] separately on each side, depending on the specified requirements. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see Note 1. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

EN 13603:2021 铜和铜合金.评估电气用途拉制圆铜线上的保护锡镀层的试验方法

Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes

BS ISO 23486:2021 金属和其他无机涂层 用弯曲共振法测量热障涂层在高温下的杨氏模量

Metallic and other inorganic coatings. Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method

DS/ISO 23486:2021 金属和其他无机涂层 弯曲共振法在高温下测量热障涂层的杨氏模量

Metallic and other inorganic coatings – Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method