27.060.30 锅炉和热交换器 标准查询与下载
共找到 927 条与 锅炉和热交换器 相关的标准，共 62 页
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
- ICS
- 27.060.30
- CCS
- 发布
- 2021-01-21
- 实施
- 2021-01-21
Regulations for Periodic Inspection of Flue Type Waste Heat Boiler
- ICS
- 27.060.30
- CCS
- J 98
- 发布
- 2020-12-30
- 实施
- 2021-01-30
Regular Inspection Rules for Main Load-bearing Parts of Boiler
- ICS
- 27.060.30
- CCS
- J 75
- 发布
- 2020-12-30
- 实施
- 2021-01-30
Testing methods for boiler feed water and boiler water
- ICS
- 27.060.30
- CCS
- 发布
- 20201229
- 实施
- 20201229
依据《特种设备安全监察条例》《广东省特种设备安全条例》《特种设备使用管理规则TSG 08》《特种设备作业人员考核规则TSG Z6001》《锅炉安全技术规程TSG 11》等，编制主要内容如下： 4.1 使用登记 4.2 机构及人员 4.3 检查及检验 4.4 档案、制度、规程及记录 4.5 运行及检修 4.6 安全附件及仪表 4.7 D级锅炉 依据《锅炉节能技术监督管理规程TSG G0002-2010》，编制主要内容如下： 4.9 节能 依据《有机热载体GB 23971》《有机热载体安全技术条件GB 24747》《工业锅炉水质GB/T 1576》《工业锅炉水处理设施运行效果与监测GB/T 16811》等，编制主要内容如下： 4.8 水（介）质处理 依据《中华人民共和国固体废物污染环境防治法》《锅炉大气污染物排放标准DB44/765》等，编制主要内容如下： 4.10 环保
Specifications for the use and management of industrial boilers
- ICS
- 27.060.30
- CCS
- D4430
- 发布
- 2020-12-10
- 实施
- 2021-04-13
1.1 This test method covers the determination of the thermal stability of unused organic heat transfer fluids. The procedure is applicable to fluids used for the transfer of heat at temperatures both above and below their boiling point (refers to normal boiling point throughout the text unless otherwise stated). It is applicable to fluids with maximum bulk operating temperature between 260 °C (500 °F) and 454 °C (850 °F). The procedure shall not be used to test a fluid above its critical temperature. In this test method, the volatile decomposition products are in continuous contact with the fluid during the test. This test method will not measure the thermal stability threshold (the temperature at which volatile oil fragments begin to form), but instead will indicate bulk fragmentation occurring for a specified temperature and testing period. Because potential decomposition and generation of high pressure gas may occur at temperatures above 260 °C (500 °F), do not use this test method for aqueous fluids or other fluids which generate high-pressure gas at these temperatures. 1.2 DIN Norm 51528 and GB/T 23800 cover other test methods that are similar to this test method. 1.3 The applicability of this test method to siloxane-based heat transfer fluids has not been determined. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.2, 8.8, 8.9, and 8.10. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
- ICS
- 27.060.30
- CCS
- 发布
- 2020-12-01
- 实施
本文件规定了燃气钢制冷凝承压热水锅炉的术语和定义、型号、基本要求、技术要求、检验和试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于以下范围的燃气钢制冷凝承压热水锅炉： a) 以天然气为燃料； b) 额定功率为 0.1 MW~14 MW； c) 额定出水压力大于或者等于 0.1 MPa； d) 最高出水温度小于或者等于 120 ℃。
Condensing gas-fired steel pressure hot water boiler
- ICS
- 27.060.30
- CCS
- C341
- 发布
- 2020-11-06
- 实施
- 2020-11-16
本标准规定了常压热水锅炉的型号和基本参数、技术要求、检验和试验、检验规则、标志、包装、运输及贮存、出厂资料、质量责任。 本标准适用于以水为介质，表压为零的固定式常压热水锅炉。
Atmospheric hot water boiler
- ICS
- 27.060.30
- CCS
- C341
- 发布
- 2020-08-25
- 实施
- 2020-09-23
本标准规定了真空热水锅炉的术语和定义、参数和型号、技术要求、检验和试验、检验规则、标志、包装、运输和贮存、出厂资料、质量责任。 本标准适用于以水为介质，换热空间为负压真空环境的的固定式真空热水锅炉。
Vacuum hot water boiler
- ICS
- 27.060.30
- CCS
- C341
- 发布
- 2020-08-25
- 实施
- 2020-09-23
On-line detection method for comprehensive performance of in-use vacuum adiabatic cryogenic pressure vessel
- ICS
- 27.060.30
- CCS
- J 98
- 发布
- 2020-07-24
- 实施
- 2020-08-15
Power station plugging valve inspection regulations
- ICS
- 27.060.30
- CCS
- J 98
- 发布
- 2020-06-22
- 实施
- 2020-07-22
Technical Guidelines for External Inspection of Subcritical and Above Power Plant Boilers
- ICS
- 27.060.30
- CCS
- J98
- 发布
- 2020-06-22
- 实施
- 2020-07-22
1.1 This practice describes procedures to be followed during eddy current examination (using an internal, probe-type, coil assembly) of nonmagnetic tubing that has been installed in a heat exchanger. The procedure recognizes both the unique problems of implementing an eddy current examination of installed tubing, and the indigenous forms of tube-wall deterioration which may occur during this type of service. The document primarily addresses scheduled maintenance inspection of heat exchangers, but can also be used by manufacturers of heat exchangers, either to examine the condition of the tubes after installation, or to establish baseline data for evaluating subsequent performance of the product after exposure to various environmental conditions. The ultimate purpose is the detection and evaluation of particular types of tube integrity degradation which could result in in-service tube failures. 1.2 This practice does not establish acceptance criteria; they must be specified by the using parties. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
- ICS
- 27.060.30
- CCS
- 发布
- 2020-06-01
- 实施
