27.080 热泵 标准查询与下载

23/30450673 DC BS ISO 19967-2 空气到水热泵 性能测试和评级 第 2 部分：空间供暖和/或空间制冷

BS ISO 19967-2. Air to water Heat pumps. Testing and rating for performance - Part 2. Space heating and/or space cooling

ISO 22712:2023 制冷系统和热泵.人员能力

This document defines the activities related to refrigerating systems according to ISO 5149-1, EN 378-3,[5] EN 378-4[6] and the associated competence profiles. It also establishes the competence criteria for persons who carry out these activities. Activities concerning electricity are excluded. NOTE 1 As a refrigerating circuit is considered not to incorporate electrical and electronic systems, activities in this area are not part of this document. National regulations or appropriate International or national standards can be referred to for competence on electrical and electronic systems. NOTE 2 This document does not apply to persons carrying out work on self-contained refrigerating systems as defined in ISO 5149-1 or EN 378-1, from the initial design of the product to the complete manufacture of the product, provided the process is controlled and the methods used are checked by an organization or individual responsible for the conformance with statutory requirements on health, safety and environment (e.g. energy efficiency). NOTE 3 This document does not constitute a training programme.

Refrigerating systems and heat pumps — Competence of personnel

BS EN 16905-5:2022 燃气吸热发动机驱动的热泵 供暖和制冷模式下季节性性能的计算

1   Scope This part of EN 16905 specifies the calculation of the seasonal performance factor for gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery, to be used outdoors. This document only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This document only applies to appliances under categories I 2H , I 2E , I 2Er , I 2R , I 2E(S)B , I 2L , I 2LL , I 2ELL , I 2E(R)B , I 2ESi , I 2E(R) , I 3P , I 3B , I 3B/P , II 2H3+ , II 2Er3+ , II 2H3B/P , II 2L3B/P , II 2E3B/P , II 2ELL3B/P , II 2L3P , II 2H3P , II 2E3P and II 2Er3P according to EN 437:2021. This document only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation;

Gas-fired endothermic engine driven heat pumps. Calculation of seasonal performances in heating and cooling mode

KS B ISO 13256-2-2022 水源热泵.性能试验和额定值.第2部分:水对水和盐水对水热泵

Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps

KS B ISO 13256-1:2022 水源热泵.性能试验和额定值.第1部分:水对空气和盐水对空气热泵

Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps

KS B ISO 13256-1-2022 水源热泵.性能试验和额定值.第1部分:水对空气和盐水对空气热泵

Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps

KS B ISO 13256-2:2022 水源热泵.性能试验和额定值.第2部分:水对水和盐水对水热泵

Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps

DB11/T 1254-2022 再生水热泵系统工程技术规范

Reclaimed water heat pump system engineering technical specification

DB11/T 1253-2022 地埋管地源热泵系统工程技术规范

Engineering technical specification for buried pipe ground source heat pump system

T/GDC 204-2022 以R290为制冷剂的室内热泵热水器技术要求和试验方法

R290为制冷剂的室内热泵热水器产品分类、技术要求及试验方法。

Technical requirements and test methods for indoor heat pump water heaters using R290 as refrigerant

T/GDC 203-2022 家用空气源泳池恒温热泵安装规范

家用空气源泳池恒温热泵安装要求、布线要求

Specification for installation of household air source swimming pool constant temperature heat pump

T/GDC 202-2022 复叠式空气源热泵机组

气密性和压力试验、运转、名义工况、高温出水工况等。

Superimposed air-source heat pump unit

EN 16905-5:2022 燃气吸热发动机驱动热泵.第5部分:加热和冷却模式季节性性能的计算

This part of EN 16905 specifies the calculation of the seasonal performance factor for gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery, to be used outdoors. This document only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This document only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437:2021. This document only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar, 2) domestic hot water circuit (if installed) does not exceed 10 bar. This document applies to GEHP appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. This document is applicable to GEHP appliances that are intended to be type tested. Requirements for GEHP appliances that are not type tested would need to be subject to further consideration.

Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode

ISO 5149-4:2022 制冷系统和热泵.安全和环境要求.第4部分:操作、维护、修理和恢复

Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4: Operation, maintenance, repair and recovery

NB/T 11040-2022 家用空气源直膨式地暖热泵机组

Household air source direct expansion floor heating heat pump unit

NB/T 11039-2022 畜禽养殖场空气源热泵应用技术规范

Technical specifications for the application of air source heat pumps in livestock and poultry farms

NB/T 11041-2022 空气源热泵热水器内置式零冷水系统技术条件

Technical conditions for built-in zero cold water system of air source heat pump water heater

T/EES 0012-2022 质 量 分 级 及 “ 领 跑 者 ” 评 价 要 求 基 于 地 埋 管 地 源 热 泵 系 统 的 高 效 能 源 站 运 营 服 务

本文件适用于基于地埋管地源热泵系统的高效能源站（简称：能源站）运营服务质量和企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunnerHigh efficiency energy station operation service based on buried pipe ground source heat pump system

EN 14511-4:2022 空间加热和制冷用带电驱动压缩机的空调,液体冷却包和热泵.第4部分:要求

1.1 The scope of EN 14511-1:2022 is applicable, with the exception of process chillers. 1.2 This document specifies minimum operating requirements which ensure that air conditioners, heat pumps and liquid chilling packages using either air, water or brine as heat transfer media, with electrical driven compressors are fit for the use designated by the manufacturer when used for space heating and/or cooling.

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements

EN 14511-2:2022 空间加热和制冷用电动压缩机空调,液体冷却装置及热泵.第2部分:试验条件

1.1 The scope of EN 14511-1:2022 is applicable. 1.2 This document specifies the test conditions for the rating of air conditioners, liquid chilling packages and heat pumps, using either, air, water or brine as heat transfer media, with electrically driven compressors when used for space heating and/or cooling. The document also specifies the test conditions for the rating of air-cooled and water(brine)-cooled process chillers. 1.3 This document specifies the conditions for which performance data are to be declared for single duct and double duct units for compliance to the Ecodesign Regulation 206/2012 and Energy Labelling Regulation 626/2011.

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions