27.080 热泵 标准查询与下载

T/GDC 50-2021 空气源热泵无水地暖机组

一般规定、电镀件耐盐雾性、涂装件涂层附着力、气密性试验、真空试验和液压试验、性能要求、设计和使用条件、噪声与振动、电器安全

Air source heat pump waterless floor heating unit

EN 16905-2:2020 燃气吸热式发动机驱动的热泵 第2部分：安全

This part of prEN 16905 specifies the safety requirements, the safety test conditions and the safety test methods of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery, to be used outdoors. This document specifies minimum operating requirements which ensure that the products are fit for the use designated by the manufacturer when used for space heating and/or cooling. This document is to be used in conjunction with: a) the terms and conditions, EN 16905-1:2017; b) the test conditions, EN 16905-3:2017; c) the test methods, prEN 16905-4:2022; d) the calculation of seasonal performances in heating and cooling mode, FprEN 16905-5:2022; e) the heat pump, EN 14511-4:2022, EN 378-1:2016+A1:2020, EN 378-2:2016, EN 378 3:2016+A1:2020, EN 378-4:2016+A1:2019 and EN 14825:2018; f) electrical safety, EN 60335-1:2012, EN 60335-2-102:2016, EN 60335-2-40:2003 and EN 60204-1:2018. This document only applies to GEHP appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This document only applies to GEHP appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437:2021. This document only applies to GEHP appliances: g) that have gas fired endothermic engines under the control of fully automatic control systems; h) that have closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; i) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; j) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar; 2) domestic hot water circuit (if installed) does not exceed 10 bar. This document is applicable to GEHP appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. This document is applicable to GEHP appliances that are intended to be type tested. Requirements for GEHP appliances that are not type tested would need to be subject to further consideration.

Gas-fired endothermic engine driven heat pumps - Part 2: Safety

T/HBTAIYANG 01-2019 湖北省太阳能热水系统应用技术标准

太阳能热水系统与建筑一体化设计、太阳能热水系统设计、太阳能热水系统设备与部件、太阳能热水系统施工安装、太阳能热水系统调试与检测、太阳能热水系统工程验收、太阳能热水系统的运行与维护等

Technical Standards for Application of Solar Water Heating System in Hubei Province

KS B 8291-1-2019 地源热泵 导热系数测试方法 第1部分：立式闭环式及能量档式

Ground source heat pump－Thermal conductivity test mothod－Part 1：Vertical close loop type and energy file type

EN 378-4:2016+A1:2019 制冷系统和热泵-安全和环境要求-第4部分:操作,维护,修理和恢复 包含修改件A1,2019

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants. The term "refrigerating system" used in this European Standard includes heat pumps. This standard applies: a) to refrigerating systems, stationary or mobile, of all sizes including heat pumps; b) to secondary cooling or heating systems; c) to the location of the refrigerating systems; d) to parts replaced and components added after adoption of this standard if they are not identical in function and capacity. This standard does not cover "motor vehicle air conditioners" constructed according to product standards such as ISO 13043. Systems using refrigerants other than those listed in FprEN 378-1:2016, Annex E are not covered by this standard unless they have been assigned to a safety class according to ISO 817. This standard does not apply to goods in storage. This standard is not applicable to refrigeration systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication. This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site. This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed. This Part 4 of the European Standard specifies requirements for safety and environmental aspects in relation to operation, maintenance, and repair of refrigerating systems and the recovery, reuse and disposal of all types of refrigerant, refrigerant oil, heat-transfer fluid, refrigerating system and part thereof. These requirements are intended to minimise risks of injury to persons and damage to property and the environment resulting from improper handling of the refrigerants or from contaminants leading to system breakdown and resultant emission of the refrigerant. Subclauses 4, 5.1.1 to 5.1.4, 5.2, 5.3.1, 5.3.3 and 6.6 of this European Standard are not applicable to unitary systems having a power cord, being factory sealed, and in conformance with EN 60335 series.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

DB11/T 1652-2019 空气源热泵节能监测

Air source heat pump energy saving monitoring

DB11/T 1651-2019 污水源热泵供热系统节能监测

Energy saving monitoring of sewage source heat pump heating system

DB12/T 906-2019 汽车污染物排放维护治理站建设条件

Conditions for the Construction of Vehicle Pollutant Emission Maintenance and Treatment Stations

T/GDC 33-2019 低温空气源热泵通用技术条件

 一般要求、电镀件耐盐雾性、涂装件涂层附着力、气密性和压力试验、运转试验、名义工况性能、综合部分负荷性能、设计和使用条件、安全性能

General technical specification for low temperature air source heat pump

T/GDC 31-2019 泳池恒温除湿热泵设备

一般要求、安全要求、气密性、制热量、制热消耗功率、性能系数（COP）、水侧压力损失、运转、最大负荷工况、融霜工况、低温工况、变工况要求、噪声、耐盐雾性、涂层附着力

Swimming pool constant temperature dehumidification heat pump equipment

T/GDC 32-2019 印刷机械热泵烘干机

一般要求、性能要求、安全防护、电气安全、外观要求、使用性能要求、噪声

Printing Machinery Heat Pump Dryer

ISO 19967-2:2019 热泵热水器 - 性能测试和评级 - 第2部分:用于空间加热的热泵热水器

This document specifies test conditions and test procedures for determining the performance characteris tics of air source heat pump water heaters for space heating with electrically driven compressors with or without supplementary heater. The purpose of this document is to rate the performance of the heat pump water heaters for space heating with no operation of any supplementary heater. In the case of heat pump water heaters for space heating consisting of several parts with refrigerant or water connections, this document applies only to those designed and supplied as a complete package. NO TE Tes ting procedures for simultaneous operation for hot water supply and space heating are not treated in this document. Simultaneous means that hot water supply and space heating generation occur at the same time and can interact.

Heat pump water heaters — Testing and rating for performance — Part 2: Heat pump water heaters for space heating

DB11/T 1639-2019 地源热泵系统节能监测

Energy saving monitoring of ground source heat pump system

ISO 16358-1:2013/Amd 1:2019 风冷式空调器和空气对空气热泵.季节性性能系数的试验和计算方法.第1部分:冷却季节性性能系数.修改件1

Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Amendment 1

BS ISO 19967-1:2019 热泵热水器 性能测试和评级 供应热水的热泵热水器

What is ISO 19967-1— Heat pump water heaters about? ISO 19967-1 is part one of the multi-series international standard focuses on heat pump water heaters.   ISO 19967-1 includes requirements for adjustment of set values, stability criteria, and uncertainties of measurement while designing the test apparatus. ISO 19967-1 specifies test conditions and test procedures for determining the performance characteristics of air source heat pump water heaters for hot water supply with electrically driven compressors with or without supplementary electric heater and connected to or including one hot water storage tank. Note: ISO 19967-1 is not applicable to testing procedures for simultaneous operation for hot water supply and space heating. Who is ISO 19967-1— Heat pump water heaters for? ISO 19967-1 on heat pump water heaters is for: Heat pump water Heater manufacturers Dealers and suppliers of Heat Pump water heaters Test/service providers for Heat Pump water heaters Installers of Heat Pump water heaters Why should you use ISO 19967-1— Heat pump water heaters ? Heat pump water heaters are one of the most energy-efficient water heating systems in the use today. A heat pump water heater can enable up to 25 to 50 percent savings on electric water-heating costs. ISO 19967-1 specifies the test methods to determine the performance of the heat pump water heater, which ensures the high efficiency and reliability of the water heaters. It proves to be very helpful for you in recommending the setting to manufacturers and installers.

Heat pump water heaters. Testing and rating for performance - Heat pump water heater for hot water supply

ISO 19967-1:2019 热泵热水器 - 性能测试和评级 - 第1部分:热水供热热泵热水器

This document specifies test conditions and test procedures for determining the performance characteristics of air source heat pump water heaters for hot water supply with electrically driven compressors with or without supplementary electric heater and connected to or including only one hot water storage tank. Hot water storage tanks that are connected in series or parallel and behave hydronically as one single tank are considered as one hot water storage tank. In the case of heat pump water heaters consisting of several parts with refrigerant or water connections, this document applies only to those designed and supplied as a complete package. NOTE This document is not applicable to testing procedures for simultaneous operation for hot water supply and space heating. “Simultaneous” means that hot water supply and space heating generation occur at the same time and may interact.

Heat pump water heaters — Testing and rating for performance — Part 1: Heat pump water heater for hot water supply

T/LJH 009-2019 汗蒸及桑拿专用复叠式高温水源热泵机组

术语和定义、型式与基本参数、要求、试验、检验规则、标志、包装、运输和贮存等。

Cascade type high temperature water source heat pump unit for steam and sauna room

T/LJH 010-2019 汗蒸及桑拿节能系统工程技术规程

本规程的主要技术内容包括：1 总则；2 术语；3 设计；4 设备与材料；5 施工；6 检验、调试及验收等。

Technical regulations for steam and sauna room energy saving system

ISO 21978:2018 空气-水热泵 部分负荷条件下的测试和评级以及空间供暖季节性性能系数的计算

Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating

ISO 18326:2018 单管便携式空调和热泵 - 性能测试和评级

This document specifies the standard conditions for capacity and efficiency ratings of non-ducted portable air-cooled air conditioners having a single exhaust duct and non-ducted portable air-cooled heat pumps having a single exhaust duct. Such air conditioners and heat pumps may include an evaporatively cooled condenser cooled by air and the evaporation of: a) condensate collected from the evaporator; b) external supplementary water stored in a supplementary water tank; or c) both a) and b). This document also specifies the test methods for determining the capacity and efficiency ratings. This document applies to equipment that is factory-made, electrically driven and uses mechanical compression. This document is applicable to equipment utilizing one or more refrigeration systems. This document is not applicable to the rating and testing of the following: i) Water-source heat pumps or water-cooled air conditioners; ii) Multi-split-system air conditioners and air-to-air heat pumps (see ISO 15042:2017 for the testing of such equipment); iii) Individual assemblies not constituting a complete refrigeration system; iv) Equipment using the absorption refrigeration cycle; v) Ducted equipment (see ISO 13253:2017 for the testing of such equipment); vi) Evaporative coolers or any other cooling systems that are not of the vapour compression type; vii) Dehumidifiers; viii)Spot coolers.

Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct — Testing and rating for performance