29.030 磁性材料 标准查询与下载

IEC 60404-10:2016/COR1:2018 磁性材料 第10部分：电工钢带和薄片中频磁性能的测量方法；勘误表 1

Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies; Corrigendum 1

DIN EN 60404-15:2018 磁性材料.第15部分:弱磁材料相对磁导率测定方法(IEC 60404-15-2012+A1-2016);德文版本EN 60404-15-2012+A1-2017

This part of IEC 60404 specifies a solenoid method, a fluxmetric method, a magnetic moment method, a magnetic balance method and a permeability meter method for the determination of the relative magnetic permeability of feebly magnetic materials (including austenitic stainless steel). The methods given are for applied magnetic field strengths of between 5 kA/m and 100 kA/m.

Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (IEC 60404-15:2012 + A1:2016); German version EN 60404-15:2012 + A1:2017

GSO IEC/TR 62581:2017 电工钢 通过单片和爱泼斯坦试样测量磁致伸缩特性的方法

This technical report describes the general principles and technical details of the measurement of the magnetostriction of single sheet specimens preferably 500 mm long and 100 mm wide and Epstein strip specimens, specified in IEC 60404-2, of electrical steel by means of optical sensors and accelerometers. These methods are applicable to test specimens obtained from electrical steel sheets and strips of any grade. The characteristics of magnetostriction are determined for a sinusoidal induced voltage, for specified peak values of magnetic polarization and for a specified frequency. The measurements are made at an ambient temperature of 23 °C ± 5 °C on test specimens which have first been demagnetized.

Electrical steel - Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens

GSO IEC/TR 62797:2017 使用振动样品磁力计 (VSM) 和超导量子干涉装置 (SQUID) 磁力计测量磁矩的国际比较

This Technical Report provides the results of an international comparison of measurements of the magnetic moment, using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers. The basic object of this comparison is to verify the degree of reproducibility of the method employed as a prerequisite for the prospective development of a related IEC measuring standard.

International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers

IEC 60404-8-7:2017 RLV 磁性材料.第8-7部分:单项材料规范.以完全加工状态交付的冷轧晶粒取向电工钢带和薄板

Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state

IEC 60404-8-8:2017 磁性材料.第8-8部分:单项材料规范.中频下用薄型电工钢带及薄板

This part of IEC 60404 defines the grades of thin non-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm, 0,20 mm, 0,25 mm, 0,30 mm and 0,35 mm and of thin grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,05 mm, 0,10 mm, 0,15 mm and 0,18 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics and tolerances, technological characteristics, as well as inspection procedures. NOTE For thin non-oriented electrical steel strip and sheet, other nominal thicknesses (i.e. 0,12 mm, 0,18 mm, 0,23 mm and 0,27 mm) can be agreed between the manufacturer and the purchaser. This document applies to electrical steel strip and sheet supplied in the finally annealed condition in coils or sheets and intended for the construction of magnetic circuits predominantly used at frequencies in the range from 100 Hz to 10 kHz.

Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies

IEC 60404-8-7:2017 磁性材料.第8-7部分:单项材料规格.以全加工状态交货的冷轧晶粒定向电工钢片和钢带

This part of IEC 60404 defines the grades of cold-rolled grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures. This document applies to Goss textured grain-oriented electrical steel strip and sheet supplied in the final annealed condition in coils or sheets, and intended for the construction of magnetic circuits. The grades are grouped into two classes: conventional grades; high permeability grades, including grades which may be delivered in the domain refined condition. They correspond to Class C22 of IEC 60404-1.

Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state

SJ/T 2268-2018 旋磁多晶铁氧体材料系列

Gyromagnetic polycrystalline ferrite material series

EN 60404-8-6:2017 磁性材料 第 8-6 部分：个别材料规范 软磁金属材料

IEC 60404-8-6:2016 specifies the general requirements, magnetic properties, geometric characteristics and tolerances as well as inspection procedures for pure iron, silicon-iron, nickel-iron and cobalt-iron. The materials are in the form of bar, billet, sheet, strip or wire. The alloys covered correspond to those defined by classes A, C1, C2, E1 to E4 and F1 to F3 in IEC 60404-1. This edition includes the following significant technical changes with respect to the previous edition: Removal of Table 2b).

Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials

BS EN 60404-1:2017 磁性材料.分类

Magnetic materials. Classification

DIN EN 60556:2017 应用于微波频率的旋磁材料.性能测试方法(IEC 60556-2006+A1-2016);德文版本EN 60556-2006+A1-2016

Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties (IEC 60556:2006 + A1:2016); German version EN 60556:2006 + A1:2016

EN 60404-1:2017 磁性材料 第1部分：分类

IEC 60404-1:2016 is available as IEC 60404-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60404-1:2016(E) is intended to classify commercially available magnetic materials. The term "magnetic materials" denotes substances where the application requires the existence of ferromagnetic or ferrimagnetic properties. The classification of magnetic materials is based upon the generally recognized existence of two main groups of products: - soft magnetic materials (coercivity less than or equal to 1 000 A/m); - hard magnetic materials (coercivity greater than 1 000 A/m). This edition includes the following significant technical changes with respect to the previous edition: a) Removal of all tables and values describing typical properties of the material to be consistent with the aim of the document to be a classification and not a specification. b) Enlargement of the Ni content for the classes E1 and E3. c) Enlargement of the Co content for the classes F3. d) Addition of a new class: U5 bonded rare earth-iron-nitrogen magnets.

Magnetic materials - Part 1: Classification

ASTM A340-17a 与磁性试验有关的符号和定义的标准术语

Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

IEC 60404-15:2012+AMD1:2016 CSV  ；磁性材料第15部分:弱磁性材料相对磁导率的测定方法

 Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials

IEC 60404-1:2016 RLV 磁性材料.第1部分:分类

Magnetic materials - Part 1: Classification

IEC 60404-10:2016 RLV 磁性材料第10部分:电工钢带和电工钢片在中频下磁性的测量方法

Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies

IEC 60404-1:2016 磁性材料 第1部分:分类

This part of IEC 60404 is intended to classify commercially available magnetic materials. The term "magnetic materials" denotes substances where the application requires the existence of ferromagnetic or ferrimagnetic properties. In this document, the classification of magnetic materials is based upon the generally recognized existence of two main groups of products: soft magnetic materials (coercivity 1000 A/m); hard magnetic materials (coercivity >1 000 A/m). Within these main groups, the classification when appropriate recognizes the following characteristics; the main alloying element and the metallurgical state and physical properties of the material; when possible and convenient, the relationship between these characteristics is identified. A classification by specific areas of application cannot be applied to all materials because different materials can very often be used for the same application depending on the characteristics required.

Magnetic materials - Part 1: Classification

IEC 60404-10:2016 磁性材料 第10部分:磁性钢片和钢带在中频下的磁性能的测量方法

This part of IEC 60404 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurements of a.c. magnetic properties in the frequency range 400 Hz to 10000 Hz. The object of this document is to define the general principles and the technical details of the measurement of magnetic properties of electrical steel strip and sheet by means of an Epstein frame. The Epstein frame is applicable to test specimens obtained from electrical steel strips and sheets of any grade. The AC magnetic characteristics are determined for sinusoidal induced voltages, for specified peak values of magnetic polarization and for a specified frequency. The measurements are to be made at an ambient temperature of (23 ± 5)°C on test specimens which have first been demagnetized. NOTE Throughout this document the term "magnetic polarization" is used as defined in IEC 60050-221. In some standards of the IEC 60404 series, the term "magnetic flux density" was used.

Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies

ASTM A340-16e1 符号标准术语和与磁测试相关的定义

Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

SJ/T 10412-2016 永磁铁氧体料粉

Permanent magnet ferrite powder