29.035.60 涂层织物 标准查询与下载

DIN EN 60464-3-2:2007 电气绝缘用清漆.第3部分:单项材料规范.活页2:热固化浸渍漆

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes (IEC 60464-3-2:2001 + A1:2006); German version EN 60464-3-2:2001 + A1:2006

DIN EN 60464-2 Berichtigung 1:2007 绝缘漆规范.第2部分:试验方法

Varnishes used for electrical insulation - Part 2: Methods of test (IEC 60464-2:2001 + A1:2006); German version EN 60464-2:2001 + A1:2006, Corrigenda to DIN EN 60464-2 (VDE 0360-2):2006-10; CENELEC-Corrigendum December 2006 to EN 60464-2:2001/A1:2006

DIN EN 60464-2:2006 电气绝缘漆.第2部分:试验方法(IEC 60464-2-2001 + A1-2006)

Varnishes used for electrical insulation - Part 2: Methods of test (IEC 60464-2:2001 + A1:2006); German version EN 60464-2:2001 + A1:2006

DIN EN 60464-3-1:2006 电绝缘用清漆.第3部分:单项材料规范.活页1:室温固化饰面清漆(IEC 60464-3-1-2001 + A1-2006)

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001 + A1:2006); German version EN 60464-3-1:2001 + A1:2006

DS/EN 60464-2/A1:2006 电绝缘用清漆 第2部分：试验方法

Specifies methods of test to be used for testing varnishes used for electrical insulation. This includes methods of test to be applied before and others to be applied after drying and/or curing of the varnish.

Varnishes used for electrical insulation - Part 2: Methods of test

DS/EN 60464-3-1/A1:2006 用于电绝缘的清漆 第3部分：个别材料的规范 第 1 表：环境固化整理清漆

Gives the requirements for ambient curing finishing varnishes.

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

DS/EN 60464-1/A1:2006 电绝缘用清漆 第1部分：定义和一般要求

Relates to varnishes used for electrical insulation. All varnishes contain solvent. The varnishes may be used for finishing or impregnating applications, and may be dried or dried and cured at ambient temperatures.

Varnishes used for electrical insulation - Part 1: Definitions and general requirements

NF C26-942/A1*NF EN 60464-2/A1:2006 电气绝缘漆.第2部分:试验方法

Le présent document ajoute une procédure de détermination du pH des vernis non secs et/ou non durcis et de nouvelles méthodes d'essais pour vernis secs et/ou durcis (nouvelles références normatives ISO).

Varnishes used for electrical insulation - Part 2 : methods of test.

IEC 60464-1:1998/AMD1:2006 修改件1:电绝缘用清漆.第1部分:定义和一般要求

This is Amendment 1 to IEC 60464-1-2006 (Varnishes used for electrical insulation Part 1:Definition and general requirements)

Amendment 1: Varnishes used for electrical insulation - Part 1: Definitions and general requirements

IEC 60464-3-1:2001/AMD1:2006 修改件1.电气绝缘漆.第3部分:单项材料规范.活页1:环境固化覆盖漆

This is Amendment 1 to IEC 60464-3-1-2001 (Varnishes used for electrical insulation Part 3: Specifications for individual materials Sheet 1: Ambient curing finishing varnishes)

Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials; Sheet 1: Ambient curing finishing varnishes

IEC 60464-2:2001/AMD1:2006 修改件1:电气绝缘漆.第2部分:试验方法

This is Amendment 1 to IEC 60464-2-2001 (Varnishes used for electrical insulation Part 2: Methods of test)

Amendment 1: Varnishes used for electrical insulation - Part 2: Methods of test

ANSI/ASTM D3056:2005 无溶剂清漆胶凝时间的试验方法

This test method covers the determination of the gel time of a solventless varnish mixed with a catalyst and exposed to elevated temperature. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precaution statement, see Section 6. Note 1-Although this standard and IEC 60455-2 (1998-12) "Resin Based Reactive Compounds Used for Electrical Insulation-Part 2: Methods of Test" differ in approach or detail, data obtained using either are technically equivalent.

Test Method for Gel Time of Solventless Varnishes

ANSI/ASTM D5637:2005 电绝缘清漆耐湿性的试验方法(10.02)

This test method covers the mechanical performance of electrical insulating varnishes subjected to high humidity conditions. The values stated in SI units are to be regarded as standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 7.1. Note 1 -There is not ISO or IEC equivalent.

Test Method for Moisture Resistance of Electrical Insulating Varnishes (10.02)

ANSI/ASTM D5638:2005 电绝缘清漆耐化学性的试验方法(10.02)

This test method covers the mechanical performance of insulating varnishes after exposure to various chemicals. The values stated in SI units are the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See . Note 1There is no IEC/ISO equivalent.

Test Method for Chemical Resistance of Electrical Insulating Varnishes (10.02)

ANSI/ASTM D4882:2005 用扭转线圈试验测定电绝缘清漆粘结强度的试验方法

This test method covers the determination of the bond strength of an electrical insulating varnish when applied to a twisted coil of film-insulated magnet wire. The use of a particular type of film-insulated wire will show the values for that combination of film coating and varnish. This standard does not purport to address all, if any, of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to useA specific precautionary statement is given in Section . The values stated in inch-pound units are the standard. The values given in parentheses are for information only. Note 1 Although this standard and Method C of IEC 61033 differ in approach or detail, data obtained using either are technically equivalent.

Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted Coil Test

ASTM D5638-05(2010) 电绝缘漆的耐化学性能的标准试验方法

This test method is useful for the evaluation of insulating varnish performance in chemical exposure.1.1 This test method covers the mechanical performance of insulating varnishes after exposure to various chemicals. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 7.1. Note 18212;There is no IEC/ISO equivalent.

Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

ANSI/ASTM D3251:2004 薄膜绝缘磁性金属丝用电绝缘清漆热老化特性的试验方法

This test method covers the determination of the thermal endurance characteristics of electrical insulating varnishes and film-insulated magnet wire in combination. The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1This test method is equivalent to IEC 60172.

Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02)

ASTM D6053-03 电绝缘清漆中挥发性有机化合物含量测定的标准试验方法

This test method determines the volatile organic content of an electrical insulating varnish. It utilizes a procedure where dishes containing a known amount of varnish are baked and the amount of volatile organic compound is measured. Calculations are performed to express this in g/L or lb/gal. This test method is applicable to all types of varnishes. However, waterborne varnishes while baked under the same conditions need to have water content determined and calculations performed in accordance with Practice D 3960. 4.1.1 During the cure of electrical insulating varnishes some organic material is volatilized. A determination of the amount that is volatilized is useful for estimating the amount of cured varnish on electrical units and volatile organic emissions from a manufacturing facility.1.1 This test method is used to determine the amount of volatile organic compounds emitted during cure of electrical insulating varnishes. 1.2 The values stated in SI units are the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 7 for specific precautions.

Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

DS/EN 60464-3-1:2002 用于电绝缘的清漆 第3部分：个别材料的规范 第 1 表：环境固化整理清漆

This sheet of 60464-3 gives the requirements for ambient curing finishing varnishes.

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

DS/EN 60464-3-2:2002 电绝缘用清漆 第3部分：个别材料规范 第 2 页：热固化浸渍清漆

This sheet of 60464-3 gives the requirements for hot curing impregnating varnishes and includes requirements for certain properties at elevated temperature.

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes