29.060.10 电线 标准查询与下载

GB/T 4909.1-1985 裸电线试验方法 总则

本标准的规定与国际标准ISO及国际标准IEC的有关规定相一致，并参考了有关的ASTM和BS标准规定。 本标准适用于铜、铝及其合金圆线、扁线、型线及绞线等产品的机械物理性能试验。

Test methods for bare wires--General

GB/T 3955-1983 电工圆铝线

本标准适用于制造电线电缆及电机电器用的圆铝线。

Round aluminum wire for electrical purposes

GB/T 3953-1983 电工圆铜线

本标准的规定与国际电工委员会（IEC）28的规定相一致。

Round copper wire for electrical purposes

BS EN 60317-67:2017+A1:2024 特种绕组线规范 聚乙烯醇缩醛漆包矩形铝线 105级

Specifications for particular types of winding wires - Polyvinyl acetal enamelled rectangular aluminium wire, class 105

T/SZBX 158-2024 额定电压450/750V及以下双层共挤绝缘 辐照交联无卤低烟阻燃耐火电线

本文件规定了额定电压450/750V及以下双层共挤绝缘辐照交联无卤低烟阻燃耐火电线的分类与标记、一般规定、要求、试验方法、检验、标志、包装、运输和贮存。

Irradiation crosslinking low-smoke halogen flame retardant and fire resistant wires with double-layer extrusion insulation of rated voltage up to and including 450/750V

24/30491084 DC BS EN IEC 60851-5 绕组线 测试方法 第5部分：电气性能

BS EN IEC 60851-5 Winding wires - Test methods - Part 5: Electrical properties

24/30491083 DC BS EN IEC 60317-0-1/AMD2 修正案 2 特定类型绕组线的规范 第0-1部分：一般要求 漆包圆铜线

BS EN IEC 60317-0-1/AMD2 Amendment 2 - Specifications for particular types of winding wires - Part 0-1: General requirements. Enamelled round copper wire

IEC 60317-67:2017/AMD1:2024 CSV 特殊类型绕组线规范 第67部分：聚乙烯醇缩醛漆包矩形铝线 105 级

Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105

24/30486118 DC BS EN IEC 60317-27-1:2020/AMD 1 修改件1 特定类型绕组线的规范 第27-1部分：纸带包覆圆铜线

BS EN IEC 60317-27-1:2020/AMD 1 Amendment 1 - Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire

ASTM D3353-18(2024) 纤维绝缘电磁线的标准试验方法

Standard Test Methods for Fibrous-Insulated Magnet Wire

GSO IEC 60317-17:2024 特殊类型绕组线规范 第17部分：聚乙烯醇缩醛漆包扁铜线 105 级

IEC 60317-17:2020 is available as IEC 60317-17:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60317-17:2020 specifies the requirements of enamelled rectangular copper winding wires of class 105 with a sole coating based on polyvinyl acetal resin, which can be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements NOTE 1 A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. NOTE 2 Polyvinyl acetate is a general name for a family of thermoplastic vinyl resins produced by the condensation of polyvinyl alcohol with an aldehyde. Examples are polyvinyl acetal, polyvinyl formal and polyvinyl butyral. The range of nominal conductor dimensions covered by this document is: - width: min. 2,0 mm max. 31,5 mm; - thickness: min. 0,80 mm max. 10,00 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified ratio of width/thickness are given in IEC 60317-0-2. This fourth edition cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modification of the Scope (Clause 1); - renaming of stretching test to adherence test and a modification of the requirement in 8.2.

Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105

T/SZRCA 007-2023 机器人特种线缆专用铜箔丝材料技术规范

主要技术内容： 1、规定了铜箔丝材料的规格及性能要求； 2、规定了铜箔丝规格尺寸、技术要求及试验方法； 3、规定了验收规则

Technical specifications for special copper foil wire materials for robot special cables

T/SZRCA 005-2023 机器人特种线缆护套材料性能要求技术规范

主要技术内容 1、规定了机器人特种线缆聚氯乙烯塑料、聚氨酯弹性体料的机械物理性能及耐油性能； 2、规定了机器人特种线缆聚氯乙烯塑料、聚氨酯弹性体料的试验方法； 3、规定了机器人特种线缆聚氯乙烯塑料、聚氨酯弹性体料的检验方法及结果判定。

Technical specifications for performance requirements of special cable sheath materials for robots

ASTM B236/B236M-23 电气用铝条（母线）标准规范

Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

ASTM A474-03(2023) 镀铝钢绞线标准规范

Standard Specification for Aluminum-Coated Steel Wire Strand

BS EN IEC 60851-3:2023 缠绕电线 测试方法-机械性能

Winding wires. Test methods - Mechanical properties

T/CASME 821-2023 电动工具用带插头电源线技术要求

本文件规定了电动工具用带插头电源线的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Technical requirements for power cord with plug for power tools

T/QGCML 1924-2023 电力电子用叠层母排

本文件规定了电力电子用叠层母排的术语和定义、型号、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于直流工作电压 5000V 以内的系统用集成母排。

Laminated busbar for power electronics

T/QGCML 1925-2023 新能源汽车用CCS集成母排

本文件规定了新能源汽车用CCS集成母排的术语和定义、型号、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于新能源汽车用CCS集成母排的设计及检验。

CCS integrated busbar for new energy vehicles

T/QGCML 1923-2023 叠层母排模具

本文件规定了叠层母排模具的术语和定义、组成及结构、原料要求、技术要求、检验方法、检验规则、标志、包装、运输及贮存。 本文件适用于叠层母排模具，其他工业产品的叠层母排模具可参照执行。

Laminated busbar mold