29.060.10 电线 标准查询与下载

ASTM B1005-17(2023) 电气用铜包铝棒（母线）的标准规范

1.1  This specification covers copper clad aluminum rectangular bar for electrical (bus) applications. 1.2  Six classes of copper-clad aluminum bar are covered as follows: Class 20A—Nominal 20 volume % copper, annealed. Class 25A—Nominal 25 volume % copper, annealed. Class 30A—Nominal 30 volume % copper, annealed. Class 20H—Nominal 20 volume % copper, hard-worked. Class 25H—Nominal 25 volume % copper, hard-worked. Class 30H—Nominal 30 volume % copper, hard-worked. 1.3  The values stated in inch-pound units are to be regarded as the standard, except for resistivity and density, where the SI units are the standard. The values given in parentheses are for information only. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)

ASTM B559-12(2023) 电子设备用镀镍覆铜钢丝标准规范

Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application

ASTM B502/B502M-23 架空铝导线用铝包层钢芯线的标准规范

Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors

ASTM B606/B606M-23 架空导线用高强度镀锌（镀锌）钢芯线的标准规范

Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

ASTM B869-07(2023) CATV引下线用铜包钢电导体标准规范

Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

BS EN IEC 60317-93:2023 特定类型绕组线的规范 聚酯或聚酯酰亚胺外涂聚酰胺酰亚胺漆包矩形铜线，220 级

Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220

BS EN IEC 60317-89:2023 特定类型绕组线的规范 聚酯亚胺漆包圆铝线，200 级

Specifications for particular types of winding wires - Polyesterimide enamelled round aluminum wire, class 200

EN IEC 60317-93:2023 特定类型绕组线的规范 第93部分：聚酰胺酰亚胺漆包矩形铜线外涂聚酯或聚酯酰亚胺，220 级

IEC 60317-93: 2023 specifies the requirements of enamelled rectangular copper winding wire of class 220 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 25,0 mm; thickness: min. 0,80 mm max. 10,0 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-2. This International Standard is to be used in conjunction with IEC 60317-0-2:2020.

Specifications for particular types of winding wires - Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220

23/30479177 DC BS EN IEC 60317-0-3 草案 特定类型绕组线的规范 第0-3部分：一般要求 漆包铝圆线

Draft BS EN IEC 60317-0-3. Specifications for particular types of winding wires - Part 0-3: General requirements. Enamelled round aluminium wire

23/30476984 DC BS EN IEC 60851-5 缠绕电线 测试方法 第5部分：电气性能

BS EN IEC 60851-5. Winding wires. Test methods - Part 5. Electrical properties

23/30476980 DC BS EN IEC 60317-0-1 AMD 2. 特定类型绕组线的规范 第0-1部分 一般要求 漆包铜圆线

BS EN IEC 60317-0-1 AMD 2. Specifications for particular types of winding wires - Part 0-1. General requirements. Enamelled round copper wire

T/ZXJY 011-2023 复合母排

本文件规定了复合母排的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Composite busbar

T/QGCML 1016-2023 线束高强度连接线

本标准规定了线束高强度连接线的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于线束高强度连接线的生产和检验。

Wiring harness high strength connecting wire

T/QGCML 919-2023 耐高温绝缘涂层漆包线生产技术规范

本标准规定了耐高温绝缘涂层漆包线生产技术规范的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于耐高温绝缘涂层漆包线的生产和检验。

Technical specification for production of high temperature resistant insulating coated enameled wire

23/30474627 DC BS EN IEC 60317-67 AMD 1. 特定类型绕组线的规范 第 67 部分 聚乙烯醇缩醛漆包矩形铝线 105 级

BS EN IEC 60317-67 AMD 1. Specifications for particular types of winding wires - Part 67. Polyvinyl acetal enamelled rectangular aluminium wire, class 105

T/CEEIA 689-2023 物联网标识体系 电线电缆和光纤光缆Ecode标识印制设备选用导则

本文件规定了电线电缆和光纤光缆产品（以下简称“线缆产品”）Ecode标识印制设备的应用要求和Ecode标识的印制质量要求。 本文件适用于印制线缆产品Ecode标识用连续式激光喷码机、连续式油墨喷码机以及其他可用来印制Ecode标识的设备的选型、采购和验收。

Identification system for internet of things—guideline for selection of ecode identification printer for electric wires/cables and optical fibres/optical cables

T/CES 197-2023 电缆屏蔽用铝合金带

本文件规定了电缆屏蔽用铝合金带（以下简称铝合金带）的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书等。 （1）基本要求 规定了电缆屏蔽用铝合金带的物理结构结构、化学成分、状态规格以及产品表示方法等条款。 （2）技术要求 规定了电缆屏蔽用铝合金带的表面质量、外形尺寸及其允许偏差、成卷要求、力学性能、耐腐蚀性能、电性能和成品电缆的铝合金带屏蔽短路温升的技术参数。 （3）试验方法 提出了电缆屏蔽用铝合金带的表面质量、外形尺寸及其允许偏差、成卷要求、力学性能、耐腐蚀性能、电性能和成品电缆的铝合金带屏蔽短路温升性能的检验方法和参考标准依据。 （4）检验规则 主要包括检验和验收、组批、检验项目、取样、检验结果判定等检验规则

Aluminum alloy strip for cable shield

T/JX 059-2023 接地用铜覆钢导线

本文件规定了接地用铜覆钢导线的技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于接地用铜覆钢导线。

Copper-clad steel wire for grounding

T/CASME 314-2023 漆包铝扁绕组线

本文件规定了漆包铝扁绕组线的分类及代号、型号、材料要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Enamelled rectangular aluminum wire

ASTM B978/B978M-23 铝基复合增强（ACAMCR） 原ACCR同心绞合铝导线标准规范

1.1 This specification covers concentric-lay-stranded conductors made from round aluminum-zirconium alloy wires and an aluminum matrix composite (AMC) core wire(s) for use as overhead electrical conductors (Explanatory Note 1 and Explanatory Note 2). 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum Matrix Composite Reinforced (ACAMCR), Formerly ACCR