29.080.01 电绝缘综合 标准查询与下载
共找到 89 条与 电绝缘综合 相关的标准，共 6 页
本标准规定了耐电晕电机绝缘结构的组成、技术要求、试验方法和检验规则。 本标准规定的绝缘结构由耐电晕漆包线、浸渍树脂、聚酰亚胺薄膜、槽绝缘材料等集成制备而成（模型线圈），适用于1 000 V及以下耐电晕电机绝缘。
Insulation structure of corona resistant motor
- ICS
- 29.080.01
- CCS
- D4420
- 发布
- 2019-12-30
- 实施
- 2020-01-06
本文件规定了户用光伏系统或建筑顶层光伏系统防火测试的技术要求、检测项目、检验方法和产品符合性判定原则。
Technical specifications for fire test of photovoltaic system
- ICS
- 29.080.01
- CCS
- D4420
- 发布
- 2019-01-29
- 实施
- 2019-07-11
Circular and special-shaped insulating tubes for electric power
- ICS
- 29.080.01
- CCS
- K15
- 发布
- 2018-04-03
- 实施
- 2018-07-01
本标准规定了绝缘管型母线现场验货检查及存放、现场交接试验和运行检测的项目、方法和判据。 本标准适用于7.2kV～40.5kV 绝缘管型母线。
Insulated tubular busbar on-site handover and operation inspection technical guidelines
- ICS
- 29.080.01
- CCS
- D4420
- 发布
- 2018-02-28
- 实施
- 2020-05-09
不同厂家提供的移动式局部放电在线监测装置性能参差不齐、功能多种多样，装置的适用范围、使用条件、监测数据的分析及处置无指导依据，相关装置的现场应用存在较大盲目性，限制了该创新技术的大范围推广应用。 为规范气体绝缘金属封闭设备移动式局部放电在线监测装置的应用，指导装置的设计、生产、试验、采购、验收、使用和管理，结合国家、行业相关技术法规，制定本标准。
Technical specification of mobile partial discharge on-line monitoring device for gas-insulated metal-enclosure switchgear
- ICS
- 29.080.01
- CCS
- C383
- 发布
- 2018-02-06
- 实施
- 2018-11-13
本标准规定了液浸式变压器电气绝缘系统的耐热等级、天然酯变压器用耐高温电气绝缘系统的要求、变压器绕组电气绝缘系统热评定的试验方法。 本标准适用于110kV及以下天然酯变压器电气绝缘系统的热评定。 对于其他电压等级的天然酯变压器电气绝缘系统的热评定，可参考本标准进行试验。
Thermal evaluation of high temperature electrical insulation systems of nature ester transformer
- ICS
- 29.080.01
- CCS
- C383
- 发布
- 2017-12-29
- 实施
- 2018-06-22
Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
- ICS
- 29.080.01
- CCS
- 发布
- 2017-03-01
- 实施
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
- ICS
- 29.080.01
- CCS
- 发布
- 2017-03-01
- 实施
High Voltage Insulated Fiber Optic Column
- ICS
- 29.080.01
- CCS
- K15
- 发布
- 2016-01-07
- 实施
- 2016-06-01
Overvoltage Protection and Insulation Coordination of 20kV Distribution Network
- ICS
- 29.080.01
- CCS
- K15
- 发布
- 2016-01-07
- 实施
- 2016-06-01
This part of IEC 60034 gives test procedures for the thermal evaluation and classification of changes and insulation component substitution in insulation systems used or proposed for use in a proven insulation system used in wire-wound windings. The test procedures are comparative in that the performance of a candidate system is compared to that of a reference system which has previously been proved by experience or has been evaluated by one of the procedures given in 60034-18-21 and to which the change or substitution is intended.
Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
- ICS
- 29.080.01
- CCS
- 发布
- 2015-09-03
- 实施
Power installations exceeding 1 kV a.c. - Part 1: Common rules
- ICS
- 29.080.01
- CCS
- 发布
- 2014-02-26
- 实施
Rotating electrical machines. Part 18-22. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Classification of changes and insulation component substitutions
- ICS
- 29.080.01
- CCS
- 发布
- 2014
- 实施
- 2016-03-01
Hhigh-voltage switchgear. General specifications
- ICS
- 29.080.01
- CCS
- 发布
- 2013
- 实施
- 2015-01-01
The following changes in requirements to the Standard for Safety Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment, UL 840, are being proposed: Surge Protective Devices Used in Electrical Equipment
Standard for Safety for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
- ICS
- 29.080.01
- CCS
- K15
- 发布
- 2012-01-01
- 实施
Eltctrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation
- ICS
- 29.080.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Electrical equipment and installation for a.c. voltages from 1 to 750 kV. General methods of dielectric tests
- ICS
- 29.080.01
- CCS
- K60
- 发布
- 2012
- 实施
- 2014-01-01
The following changes in requirements to the Standard for Safety Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment, UL 840, are being Recirculated: Surge Protective Devices Used in Electrical Equipment
Standard for Safety for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
- ICS
- 29.080.01
- CCS
- K15
- 发布
- 2012
- 实施
Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
- ICS
- 29.080.01
- CCS
- K20
- 发布
- 2009
- 实施
Power installations exceeding 1 kV a.c. – Part 1: Common rules (First Edition)
- ICS
- 29.080.01
- CCS
- 发布
- 2008-01-01
- 实施
