29.080.10 绝缘子 标准查询与下载
共找到 886 条与 绝缘子 相关的标准，共 60 页
IEC 60120:2020 define the dimensions of a series of standard ball and socket couplings using the standard locking devices (see IEC 60372) in order to permit the assembly of insulators or metal fittings supplied by different manufacturers. This document applies to string insulator units of the cap and pin and long rod types and their associated metal fittings. For the pin ball and the socket, dimensions apply to the finished product after any surface treatment. Extreme positions of the pin ball in the socket are given in annex. Typical examples of gauges for checking the dimensions of pin balls and sockets are given in annex.
Ball and socket couplings of string insulator units - Dimensions
- ICS
- 29.080.10
- CCS
- 发布
- 2020-10-09
- 实施
- 2020-11-26 (7)
IEC 60471:2020 applies to string insulator units of the cap and pin type and also of the long rod type as well as the fittings used with such insulators. The object of this document is to define the dimensions of a series of clevis and tongue couplings to permit the assembly of insulators or fittings supplied by different manufacturers. This third edition cancels and replaces the second edition published in 1977. This edition includes the following significant technical changes with respect to the previous edition: - there are no new clevis and tongue couplings; - For the dimensions of the existing designated size of couplings that characterize the same location, the effective number of the size is unified.
Clevis and tongue couplings of string insulator units - Dimensions
- ICS
- 29.080.10
- CCS
- 发布
- 2020-09-25
- 实施
- 2020-11-13 (7)
Technical requirements for inspection of complete sets of equipment for the imported electronics and electrical industry Part 6: Special equipment for manufacturing ceramic insulators
- ICS
- 29.080.10
- CCS
- K48
- 发布
- 2020-08-27
- 实施
- 2021-03-01
Characteristics of line post insulators
- ICS
- 29.080.10
- CCS
- 发布
- 2020-06-08
- 实施
Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1 000 V
- ICS
- 29.080.10
- CCS
- 发布
- 2020-06-08
- 实施
Characteristics of line post insulators
- ICS
- 29.080.10
- CCS
- 发布
- 2020-06-08
- 实施
Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1 000 V
- ICS
- 29.080.10
- CCS
- 发布
- 2020-06-08
- 实施
Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV — Definitions, test methods and acceptance criteria
- ICS
- 29.080.10
- CCS
- 发布
- 20191231
- 实施
- 20191231
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V — Impulse puncture testing in air
- ICS
- 29.080.10
- CCS
- 发布
- 20191231
- 实施
- 20191231
Insulators — Glossary of terms and definitions
- ICS
- 29.080.10
- CCS
- 发布
- 20191231
- 实施
- 20191231
Ball and socket type suspension insulator
- ICS
- 29.080.10
- CCS
- 发布
- 20191231
- 实施
- 20191231
本标准规定了标称电压高于1000V交流系统架空线路用棒形悬式硬质复合绝缘子的定义、试验方法及接收准则。 本标准适用于标称电压高于1000V架空线路、变电站悬垂和耐张用硬质复合绝缘子（以下简称绝缘子）。绝缘子由绝缘芯棒、伞套和端部装配件构成，承受负荷的芯棒由树脂浸渍玻璃纤维制成，端部装配件永久安装在绝缘芯棒上，伞套由硬质复合材料制成。
Rod suspension hard for overhead lines of AC system with nominal voltage higher than 1000V
- ICS
- 29.080.10
- CCS
- D4420
- 发布
- 2019-11-21
- 实施
- 2022-06-04
本标准规定了盘形悬式绝缘子用铁帽的分类与型号、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于交、直流盘形悬式绝缘子使用的铁帽。
Technical specifications for iron caps for disc suspension insulators
- ICS
- 29.080.10
- CCS
- D4420
- 发布
- 2019-11-21
- 实施
- 2022-06-03
本标准规定了采用热重分析法检测复合绝缘子伞裙及护套中硅橡胶主要组分含量的测试方法、测试条件、测试仪器、测试程序和计算方法。 本标准适用于高温硫化硅橡胶，不适用于液体硅橡胶、氟硅橡胶、硬质绝缘材料（包括脂环族环氧树脂、聚烯烃）。本标准适用于新出厂复合绝缘子主要组分含量的测定，运行后复合绝缘子主要组分含量的测定可参照执行。
Determination of main component content of composite insulator silicone rubber by thermogravimetric analysis
- ICS
- 29.080.10
- CCS
- D4420
- 发布
- 2019-11-21
- 实施
- 2022-06-04
本标准规定了直流系统用盘形悬式绝缘子锌套和锌环（以下简称锌套和锌环）的技术要求和检验规则。 本标准适用于直流系统用盘形悬式瓷绝缘子和玻璃绝缘子。
Specifications for zinc sleeves and rings of disc suspension insulators for DC systems
- ICS
- 29.080.10
- CCS
- D4420
- 发布
- 2019-11-21
- 实施
- 2022-06-03
本标准规定了1000kV交流架空输电线路用空心充气型线路柱式复合绝缘子（以下简称绝缘子）技术要求及试验方法。 本标准适用于海拔为1000m及以下地区，环境温度在-40℃～40℃之间。空心充气型线路柱式复合绝缘子由绝缘芯体、外套和端部附件构成。绝缘芯体用于承受负荷，由绝缘管及内填充绝缘气体（气体绝对压力不小于0.35MPa的氮气）组成，其绝缘管由环氧树脂浸渍玻璃纤维制成，外套由高温硫化硅橡胶制成，端部附件永久固定于绝缘芯体上。
1000kV AC Hollow Inflatable Line Post Composite Insulator Technical Specifications
- ICS
- 29.080.10
- CCS
- D4420
- 发布
- 2019-11-21
- 实施
- 2022-06-04
本标准规定了绝缘子用常温固化硅橡胶防污闪涂料（简称RTV）的基本技术要求、检验规则、包装与贮存、选用原则、验收、施工、运行维护和技术管理等。 本标准适用于交流系统额定电压高于1000V、环境温度-40℃～+40℃、污秽条件下运行绝缘子使用的RTV涂料。 本标准可参照用于直流系统。
Room temperature vulcanized silicon rubber anti-pollution coating for insulators
- ICS
- 29.080.10
- CCS
- K48
- 发布
- 2019-05-01
- 实施
- 2019-05-01
Guidelines for the use of long rod-shaped porcelain insulator string components for AC and DC overhead lines
- ICS
- 29.080.10
- CCS
- K48
- 发布
- 2018-12-25
- 实施
- 2019-05-01
The existing equation before Figure 2 was corrected with a new equation and the existing Figure 2 was substituted with an new Figure 2.
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems (IEC 60507:2013/COR1:2018); German version EN 60507:2014/AC:2018-09
- ICS
- 29.080.10
- CCS
- 发布
- 2018-12-00
- 实施
本标准规定了高压交直流空心复合绝缘子的使用条件、技术要求、检验规则、标识和文件等。 本标准适用于额定电压大于 1000V 的交流电气设备或额定电压大于 1500V 直流电气设备用空心复合绝缘子。
Technical specifications for high voltage AC and DC hollow composite insulators
- ICS
- 29.080.10
- CCS
- D4420
- 发布
- 2018-11-06
- 实施
- 2022-05-30
