29.100.01 电气设备元件综合 标准查询与下载

EN IEC 60730-2-14:2019 自动电气控制 第 2-14 部分：电动执行器的特殊要求

NEW! IEC 60730-2-14:2017 is available as IEC 60730-2-14:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-14:2017 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This International Standard is applicable to controls for building automation within the scope of ISO 16484. This part 2-14 also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. EXAMPLE Controls for commercial catering, heating and air-conditioning equipment. Electric actuators for appliances are within the scope of IEC 60335. This second edition cancels and replaces the first edition, published in 1995, its Amendment 1 (2001) and its Amendment 2 (2007). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: adapting it to the 5th Ed of IEC 60730-1, addition of checking electric actuators with action 1.AB or 2AB, and modification of tests under abnormal condition. This Part 2-14 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the 5th edition of that standard (2013). Consideration may be given to future editions of, or amendments to, IEC 60730-1. This part 2-14 supplements or modifies the corresponding clauses in IEC 60730-1, so as to convert that publication into the IEC standard: Particular requirements for electric actuators. Where this part 2-14 states "addition", "modification" or "replacement", the relevant requirement, test specification or explanatory matter in part 1 should be adapted accordingly. Where no change is necessary part 2-14 indicates that the relevant clause or subclause applies. Key words: Automatic Controls, Electric Actuators

Automatic electrical controls - Part 2-14: Particular requirements for electric actuators

T/CEEIA 344-2019 风力发电机组关键结构件设计评估指南

本标准规定了风力发电机组关键结构件设计评估工作的流程、方法及内容。 本标准适用于认证机构的风力发电机组关键结构件设计评估工作，申请人在进行风力发电机组设计认证时也可参照使用。

Guideline of Design Assessment for Key Structural Components of Wind Turbine

T/CEEIA 339-2018 有机物感温型热熔断体技术要求

本标准规定了有机物感温型热熔断体（以下简称“热熔断体”）的分类、标志、机械要求、电气要求、温度试验的技术要求。 本标准适用于安装在一般户内环境下使用的电器、电子设备及类似的组件中、用以防止它们在故障情况下出现超温的热熔断体。 注1：设备不一定是设计用来产生热量的。 注2：防止超温的有效性与热熔断体的安装位置和安装方法以及所承载的电流大小有关。 本标准适用于额定电压不超过交直流690V、额定电流不超过63A的热熔断体。 如果热熔断体所处环境的气候和其它条件和本标准所规定的相类似，则本标准也可适用于非室内条件下使用的热熔断体。 本标准中热熔断体定义为一次性动作而不可复位的装置。 本标准的目的是： 制定对热熔断体的要求； 定义试验的方法； 为热熔断体在设备中的应用提供有用的信息。 本标准不适用于腐蚀性或爆炸性大气等极端条件下使用的热熔断体。 本标准不适用于用在频率低于45Hz或高于62Hz的交流电路上的热熔断体。

Technical requirements for organic temperature-sensing thermal-links

T/ZZB 0758-2018 全自动小型空芯线圈绕线机

本标准规定了全自动小型空芯线圈绕线机的术语和定义、基本要求、通用要求、试验方法、试验规则和标志标签与文件、包装与贮存、服务和承诺。 本标准适用于全自动小型空芯线圈绕线机(简称“绕线机”)。

Fully automatic small bobbinless coil winding machine

T/SDMTGM 0004-2018 车用高功率密度驱动电机定子绕组制造数字化成套装备

本标准规定了车用高功率密度驱动电机定子绕组制造数字化成套装备的分类与标记、要求、试验方法、检验规则、标志及包装、贮存的要求。

Manufacturing digital complete sets of motor stator winding for high power density driven motor

T/CES 022-2018 统一潮流控制器（UPFC）工程二次设备交接试验规范

随着我国第一套UPFC及世界上首套基于模块化多电平换流器（MMC）技术的UPFC工程——220kV南京西环网UPFC示范工程建成投运，上海220kV蕴藻浜变电站UPFC、苏州500kV木渎变电站UPFC示范工程也完成投运，后续将在全国范围内不断扩大推广应用，解决电网潮流灵活控制的难题。开展UPFC工程二次设备交接试验，全面考核UPFC工程二次设备各单体及分系统的功能和性能，对于UPFC工程系统试验顺利开展及保证工程可靠投运至关重要。当前国内外均没有UPFC工程二次设备交接试验的标准，迫切需要相应的标准来规范UPFC现场二次设备交接试验的项目和方法，提高试验完整性和正确性。 本标准的制定能够进一步指导UPFC工程二次设备交接试验的项目、要求，并为UPFC工程二次设备交接试验开展提供有效参考依据，为设备制造、设计、运行和维护工作提供参考，提升设备运行、管理水平。 本标准重点针对UPFC工程建设及技术推广的新需求形势，充分借鉴、吸收现有我国现有UPFC工程建设调试试验的研究成果和应用经验，规范、统一UPFC工程二次设备交接试验的技术要求。 本标准规定了统一潮流控制器（UPFC）工程二次设备单体及分系统试验阶段的试验要求、项目、条件及内容。 本标准适用于220kV、500kV UPFC工程新安装的电气二次设备。其他电压等级UPFC工程可参照执行。

Standard for hand-over tests of secondary circuit equipment of UPFC Project

T/CSEE 0031-2017 电气设备六氟化硫气体泄漏红外成像现场测试方法

本标准规定了使用红外成像仪检测六氟化硫电气设备气体泄的测试条件、测试方法和结果的判断及处理。 本标准适用于以六氟化硫作为绝缘介质的各电压等级电气设备，包括组合电器、套管、断路器、电流互感器和变压器等。

Infrared imaging field test method for sulfur hexafluoride gas leakage of electrical equipment

CAN/CSA C22.2 No.292-2018 光伏应用的直流电弧故障保护

1.1 This Standard applies to dc arc fault protective devices (DC-AFPDs) and devices incorporating arc fault circuit protection intended for use in direct current circuits in photovoltaic (PV) systems having a maximum voltage rating of 1000 V dc and intended for installation in accordance with the rules of the Canadian Electrical Code, Part I. 1.2 This Standard contains construction, test, and marking requirements for DC-AFPDs and is designed to be used in conjunction with CSA CAN/CSA-C22.2 No. 5, CSA C22.2 No. 144.1, CSA C22.2 No. 305, and CSA C22.2 No. 107.1 as applicable. 1.3 A DC-AFPD is intended to detect and mitigate the effects of arcing faults that can pose a risk of fire ignition under certain conditions if the arcing persists. A DC-AFPD is not intended to detect glowing connections. 1.4 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Dc arc fault protection for photovoltaic applications

T/CEEIA 282-2017 轴向位移传感器（LVDTV）技术条件

本标准规定了轴向位移传感器（以下简称传感器）的基本参数、型号说明、结构尺寸、技术要求、试验方法、检验规则、包装、标志及保用期等。 本标准适用于石油化工、煤化工等行业用屏蔽电机、电泵用轴向位移传感器的设计、制造（生产）、测量、检验、验收。

LVDT axial displacement sensors specification

CLC/TS 50625-4-2017 WEEE 的收集 物流和处理要求 第4部分：与 WEEE 相关的收集和物流规范

Collection@ logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logistics associated with WEEE

JB/T 7634-2017 定子槽绝缘插入机

Stator slot insulation insertion machine

JB/T 10488-2017 槽绝缘成形切断机

Slot insulation forming and cutting machine

T/ZZB 0088-2016 全自动小型电磁线圈绕线机

本标准规定了全自动小型电磁线圈绕线机（简称“绕线机”）的基本要求、通用要求、试验方法、检验规则和标志、包装、运输与贮存、服务和承诺。 本标准适用于电子、汽车以及IT等行业用全自动小型电磁线圈绕线机。

Fully automatic small electromagnetic coil winding machine

CSA C22.2 No.305-2016 用于光伏 (PV) 系统的塑壳断路器、塑壳开关和断路器外壳

1.1 These requirements cover molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures rated up to 1500 V dc, intended for use with photovoltaic (PV) systems and Ref. No. 1 of Annex B. 1.2 These requirements are intended to be used in conjunction with the requirements in Ref. No. 2 of Annex B, except as modified or supplemented by this Standard. 1.3 These requirements do not cover molded-case circuit breakers or molded-case switches intended for use in battery circuits.

Molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures for use with photovoltaic (PV) systems

T/CEEIA 226-2014 RIP/OIP组合式电容套管卷绕机

型号，正常工作条件，主要技术参数，技术参数，试验方法，检测规则，标志、包装、运输和贮存，安装使用和维护

RIP/OIP Combined Capacitive Bushing Winding Machine

T/CEEIA 225-2014 BL/G型高压互感器和变压器用 自动高速绕线机

本标准规定了型号，正常工作条件，主要技术参数，技术要求，试验方法，检验规则，标志、包装、运输和贮存，安装使用与维护。

BL/G Auto High Speed Winding Machine for High Pressure Mutual Inductor and Transformer

JB/T 12012-2014 集成式真空注油设备

本标准规定了高压互感器、高压套管用集成式真空注油设备的型号、技术要求、检测方法、检验规则及标志、包装、运输与贮存、安装、使用与维护。本标准适用于对110 kV及以上电压等级互感器、套管进行集成式真空注油的设备。

High voltage mutual inductor compositive vacuum filling plant

JB/T 12010-2014 非晶合金铁心变压器真空注油设备

本标准规定了非品合金铁心变压器真空注油设备的型号、技术要求、检测方法、检验规则及标志、包装、运输与贮存、安装、使用与维护。本标准适用于在真空条件下对非晶合金铁心变压器进行注油的专用设备。

Amorphous alloy core transformer vacuum filling plant

JB/T 12011-2014 高压互感器真空干燥注油设备

本标准规定了高压互感器真空干燥注油设备的型号、技术要求、检测方法、检验规则及标志、包装、运输与贮存、安装、使用与维护。本标准适用于对110 kV及以上电压等级的互感器进行真空干燥注油的设备。

High voltage mutual inductor vacuum drying & filling plant

JB/T 11341-2013 小型电机定子端部绑扎机

本标准规定了小型电机定子端部绑扎机(以下简称绑扎机)的型号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于小型电机定子端部绕组进行绑扎的设备。

Stator over-hang coil lacing machine for small-sized electrical machine