29.120.20 连接装置 标准查询与下载

ASTM B845-97(2024) 电触点的混合流动气体（MFG）试验的标准指南

Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

ASTM B812-18(2024) 住宅用铝电气压力连接件耐环境退化性的标准试验方法

Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

EN IEC 60352-9:2024 无焊连接 第9部分：超声波焊接连接 一般要求、测试方法和实践指南

IEC 60352-9:2024 provides guidelines for welding and testing of ultrasonically welded connections and includes requirements, tests and practical guidance information. Ultrasonic welding is a form of cold friction welding that is becoming increasingly popular in many industries. This type of welding uses ultrasonic vibration to join materials together, creating a bond that is both strong and reliable. Ultrasonic welding has been identified as a process in ISO 4063-41 by the International Organization for Standardization (ISO). The process of ultrasonic welding relies on high frequency ultrasound waves being used to create frictional heat at the connection point. High temperature is not required for this special method of welding, making it one of the most cost-effective ways to join two materials together. It also requires fewer steps than traditional methods, meaning it can be completed quickly and with minimal resources. Ultrasonic welding has been around for decades but only recently has become more widely utilized due to advances in technology and its availability at lower cost. It can be used on many different materials including plastics, rubbers, metals, textiles, and composites. Due to its precision and strong bonds it creates, it has become extremely popular in manufacturing processes such as automotive industry, electronics industry, furniture production and even medical device production. This document covers ultrasonically welded connections made with stranded or flexible wires (class 2, 5 or 6 per IEC 60228) of copper or copper alloy, as well as of aluminium or aluminium alloy. These welded metal-to-metal connections shall employ wires with cross-sectional area of 0,08 mm2 to 160 mm2 and shall not exceed a total cross-sectional area, in case of wire bundle, of 200 mm2. For aluminium or aluminium alloy wires, the minimum required cross-sectional area is 2,5 mm2. Additionally, information on materials, data from industrial experience and test procedures are included to ensure electrically stable connections under prescribed environmental conditions. Lastly, this document aims to achieve comparable results when using ultrasonic welding equipment with similar performance and specifications as specified by the termination manufacturer.

Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance

T/JSEPA 018-2024 电动汽车交流有序充电桩技术条件

本文件规定了电动汽车交流有序充电桩的基本构成、功能要求、技术要求，以及性能试验方法、标志、包装、运输和贮存的要求。 本标准适用于可以接受电网调控指令，使充电行为更符合电网削峰填谷、新能源消纳等要求的交流充电桩。

Technical conditions of AC orderly charging pile for electric vehicle

GSO IEC 60352-3:2024 无焊连接 第3部分：易触及绝缘刺破 (ID) 连接 一般要求、测试方法和实践指南

IEC 60352-3:2020 is applicable to ID connections which are accessible for tests and measurements according to Clauses 6 through 8 and which are made with: – appropriately designed accessible ID terminations, – wires having solid round conductors of 0,25 mm to 3,6 mm nominal diameter, – wires having stranded conductors of 0,05 mm2 to 10 mm2 cross-sectional area, for use in electrical and electronic equipment and components. Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmen-tal conditions. There are different designs and materials for accessible ID terminations in use. For this reason only fundamental parameters of the termination are specified, while the perfor-mance requirements of the wire and the complete connection are specified in full detail. The purpose of this document is: – to determine the suitability of accessible ID connections under specified mechanical, electrical and atmospheric conditions; – to provide a means of comparing test results when the tools used to make the con-nections, if any, are of different designs or manufacture. This second edition cancels and replaces the first edition published in 1993. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the pre-vious edition: a) Subclause 7.2.2: reduce the limit of duration of contact disturbance to 1 µs. b) Subclause 7.2.3: reduce the limit of duration of contact disturbance to 1 µs. c) Transferred Clauses 9 to 13 to Annex A (informative). d) The figures were revised for clarity.

Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

KS C 3117-2023 铝制固定夹和螺栓式连接器

Deadend clamp and bolt type connector for aluminum

T/QGCML 2655-2023 金属基板散热型卡板式连接器

本文件规定了金属基板散热型卡板式连接器的术语和定义、构成及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于金属基板散热型卡板式连接器的生产及检验。

Metal substrate heat dissipation card connector

T/QGCML 2656-2023 旋转压线式快接连接器

本文件规定了旋转压线式快接连接器的术语和定义、构成及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于旋转压线式快接连接器的生产及检验。

Rotary crimp type quick connect connector

ASTM F1835-97(2023) 电缆拼接装置的标准指南

Standard Guide for Cable Splicing Installations

ASTM B478-23 恒温金属交叉曲率的标准试验方法

Standard Test Method for Cross Curvature of Thermostat Metals

CSA C22.2 No.153-2023 电气快速连接端子

1 Scope 1.1 This standard applies to quick-connect terminals, both connectors and tabs, having nominal widths of 2.8, 3.2, 4.8, 5.2, and 6.3 mm (0.110, 0.125, 0.187, 0.205, and 0.250 in). They are intended for internal wiring connections in electrical equipment and for the field termination of conductors to electrical equipment in accordance with Part I of the Canadian Electrical Code, CSA C22.1, in Canada, and the National Electrical Code, NFPA 70, in the United States of America. 1.2 These requirements apply to quick-connect terminals intended for use with one or two 26 – 10 AWG (0.13 - 5.3 mm2) copper conductors. 1.3 These requirements do not apply to terminals for use with aluminum conductors. 1.4 These requirements do not apply to multi-pole devices. Multi-pole devices are covered by UL 1977 and CSA C22.2 No. 182.3. 1.5 In Canada, general requirements applicable to this standard are given in CSA C22.2 No. 0.

Electrical quick-connect terminals

T/QGCML 1688-2023 气压焊轨车焊前提轨装置

本文件规定了气压焊轨车焊前提轨装置的术语和定义、构造及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于气压焊轨车焊前提轨装置的生产及检验。

Air pressure rail welding car welding front rail device

T/CASME 759-2023 低压配电柜

本文件规定了低压配电柜的术语和定义、基本参数、工作条件、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Low-voltage distribution cabinet

CSA C22.2 No.61914-2023 用于电气装置的电缆夹

1 Scope This International Standard specifies requirements and tests for cable cleats used for securing cables in electrical installations and for intermediate restraints used for holding cables together in formation in electrical installations. Cable cleats provide resistance to electromechanical forces where declared. This document includes cable cleats that rely on a mounting surface specified by the manufacturer for axial and/or lateral retention of cables. Various types of cable cleats and intermediate restraints are shown in Annex A. NOTE Requirements for manufacturers in this document also apply to importers and responsible vendors where appropriate. This document does not apply to cable ties. 1DV Replace Clause 1 with the following: 1.1DV This Standard specifies requirements and tests for a) cable cleats that provide resistance to electromechanical forces; b) cable cleats that are used for securing cables in electrical installations; c) intermediate restraints that are used for holding cables together in formation in electrical installations; and d) cable cleats and intermediate restraints that are installed in accordance with CSA C22.1 (CE Code, Part I). 1.2DV This Standard includes cable cleats that rely on a mounting surface specified by the manufacturer for axial and lateral retention of cables. 1.3DV This Standard does not apply to cablebus (which are covered in CSA C22.2 No. 273). 1.4DV This Standard does not apply to metallic or nonmetallic cable ties (which are covered in CSA C22.2 No. 62275). 1.5DV This Standard does not apply to devices without a short-circuit current rating such as wire or cable management clamps, clips, hangers, mounts, positioning devices, staples, straps, or similar devices (which are covered in CSA C22.2 No. 18.4 and CSA C22.2 No. 18.5). 1.6DV Various types of cable cleats and intermediate restraints are shown in Annex A. Note: Requirements for manufacturers in this Standard also apply to importers and responsible vendors, where appropriate.

Cable cleats for electrical installations

T/SZECDC 004-2023 新能源车用三电合一控制连接组件通用技术要求

  本文件规定了新能源车用三合一控制连接组件的术语和定义、技术要求、试验、检验规则、标志、包装、运输及贮存。   本文件适用于新能源车用三合一(电机、电控、电源)控制连接组件的制造、检验和验收。

General technical requirements for three-in-one control connection components for new energy vehicles

BS EN IEC 60352-6:2022 无焊连接 绝缘刺穿连接 一般要求、测试方法和实践指导

1   Scope This part of IEC 60352 is applicable to insulation piercing connections made with stranded wires and tinsel wires , insulated flat conductors and flat flexible circuitries for use in electrical and electronic equipment. Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions. The object of this document is to: — determine the suitability of insulation piercing connections under specified mechanical, electrical, and atmospheric conditions; — provide a means of comparing test results when the tools used to make the connections, if any, are of different designs or manufacture. There are different designs and materials for insulation piercing terminations in use. For this reason, only fundamental parameters of the termination, the performance requirements of the conductor and the complete connection are specified in this document.

Solderless connections. Insulation piercing connections. General requirements, test methods and practical guidance

EN IEC 60352-6:2023 无焊连接 第6部分：绝缘穿刺连接 一般要求、测试方法和实用指南

IEC 60352-6:2022 This part of IEC 60352 is applicable to insulation piercing connections made with stranded wires and tinsel wires, insulated flat conductors and flat flexible circuitries for use in electrical and electronic equipment. Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions. The object of this document is to: determine the suitability of insulation piercing connections under specified mechanical, electrical, and atmospheric conditions; provide a means of comparing test results when the tools used to make the connections, if any, are of different designs or manufacture.

Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

IEC 60352-6:2022 无焊连接.第6部分:绝缘穿孔连接.一般要求、试验方法和实用指南

Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

JB/T 13995-2022 家用和类似用途带LED指示灯开关

Switch with LED indicator light for household and similar purposes

KS C IEC 60998-2-5-2022 家用和类似用途低压电路连接装置 第2 5部分：端子或连接装置用接线盒（分接器和/或分接器）的特殊要求

Connecting devices for low－voltage circuits for household and similar purposes Part 2－5：Particular requirements for connecting boxes(junction and/or tapping) for terminals or connecting devices