29.140.01 电灯综合 标准查询与下载

DB44/T 450-2007 路灯节能装置

本标准规定了路灯节能装置的产品分类、技术要求、检验方法、检验规则以及标志、包装、运输要求。本标准适用于额定电压220V、额定频率为50Hz的路灯节能装置，该产品主要用于标称功率70W～1000W并符合GB/T13259－2005标准要求的高压钠灯

Street light energy saving device

NF C91-015/A1:2007 电照明设备和类似电器装置的无线电干扰特性的极限值和测量方法

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

IEC 62471:2006 灯具和灯具系统的光生物学安全性

This International Standard gives guidance for evaluating the photobiological safety of lamps and lamp systems including luminaires. Specifically it specifies the exposure limits, reference measurement technique and classification scheme for the evaluation and control of photobiological hazards from all electrically powered incoherent broadband sources of optical radiation, including LEDs but excluding lasers, in the wavelength range from 200 nm through 3000 nm.

Photobiological safety of lamps and lamp systems

IEC 61126:1992/AMD2:2005 修改件2:最大灯轮廓的制备程序

Amendment 2 - Procedure for use in the preparation of maximum lamp outlines

AS/NZS 3113:2005 批准和测试规范 天花板玫瑰

Specifies essential safety requirements for ceiling roses rated up to, and including, 16？A for use at low voltage. It is to be read in conjunction with AS/NZS？3100.

Approval and Test Specification - Ceiling Roses

AS/NZS 61347.2.3:2004 灯控制装置第 2.3 部分：荧光灯用交流供电电子镇流器的特殊要求（取代 AS/NZS 60928:2000；取代 AS 3134:1992）

Specifies particular safety requirements for electronic ballast associated with fluorescent lamps as specified in AS/NZS 4782.1, AS/NZS 60901 and other fluorescent lamps for high frequency operation.

Lamp controlgear Part 2.3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (Supersedes AS/NZS 60928:2000; Supersedes AS 3134:1992)

AS/NZS 61347.2.9:2004 灯控制装置．放电灯用镇流器的特殊要求（荧光灯除外）（IEC 61347－2－9：2000，MOD）

Specifies particular safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. This Standard is reproduced from IEC 61347-2-9:2000 including its Amendment 1:2003.

Lamp controlgear - Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC？61347-2-9:2000 MOD)

AS/NZS 61347.2.10:2004 灯具控制装置．冷启动管状放电灯（氖管）的高频运行用电子逆变器器和变流器的特殊要求（IEC 61347－2－10：2000 MOD）

Specifies particular safety requirements for electronic invertors and convertors for high-frequency operation of tubular cold-cathode discharge lamps used in signs and luminous discharge tube installations.

Lamp controlgear - Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) (IEC？61347-2-10:2000 MOD)

KS C 7707-2003 微型灯的指定方法

METHOD FOR THE DESIGNATION OF MINIATURE LAMPS

DB31/T 178-2002 照明设备合理用电导则

Guidelines for Rational Electricity Utilization of Lighting Equipment

AS/NZS 61347.2.8:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Specifies safety requirements for ballasts excluding resistance types and used in a.c. supplies up to 1000° V. This Standard is reproduced from IEC 61347-2-8:2000 and modified to suit national requirements.

Lamp controlgear - Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000, MOD)

AS/NZS 61347.2.11:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1000 V and d.c. supply up to 250 V. This Standard is reproduced from IEC 61347-2-11 and modified to suit national requirements.

Lamp controlgear - Particular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001, MOD)

AS/NZS 61347.2.5:2002 灯的控制装置．公共交通用直流供电电子镇流器的特殊要求

Specifies electrical safety requirements for road and railway vehicles, tram cars and craft used for public transport. This Standard is identical to and reproduced from IEC 61347-2-5:2000.

Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for public transport

AS/NZS 61347.2.1:2002 灯的控制装置．起动装置的特殊要求（除辉光启动器以外）

Specifies safety requirements for starting devices for fluorescent and other discharge lamps for use on a.c. supplies up to 1000 V at 50/60 Hz in combination with lamps and ballasts. This Standard is identical to and reproduced from IEC 61347-2-1:2000.

Lamp controlgear - Particular requirements for starting devices (other than glow starters)

AS/NZS 61347.2.6:2002 灯的控制装置 航空器照明用直流电子镇流器的特殊要求

Specifies safety requirements for d.c. supplied electronic ballasts intended for operation from power sources with transients and surges such as aircraft. This Standard is identical to and reproduced from IEC 61347-2-6:2000.

Lamp controlgear - Particular requirements for d.c supplied electronic ballasts for aircraft lighting

AS/NZS 61347.2.4:2002 灯的控制装置 一般照明用直流电子镇流器的特殊要求

Specifies safety requirements for d.c. supplied electronic ballasts for operation from surge-free power sources from batteries without charging equipment. This Standard is identical to and reproduced from IEC 61347-2-4:2000.

Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general lighting

AS/NZS 61347.1:2002 灯的控制装置 总则和安全性要求(IEC 61347-1:2000,修订)

Specifies electrical safety requirements for lamp controlgear for use in d.c. supplies up to 250 V and a.c. supplies up to 1000 V. This Standard is reproduced from IEC 61347-1:2000 and varied to suit Australian/New Zealand conditions.

Lamp controlgear - General and safety requirements (IEC 61347-1:2000, MOD)

SNI 04-6917.1-2002 用于放电灯的镇流器（管形荧光灯除外）. 通用和安全技术要求. 第1部分：通用条件

Ballast auxiliaries for discharge lamps (excluding tubular flourescent lamps) - General and safety requirements. Part 1: General requirements

DIN 49972:2001 新式照明产品的分类和说明

Classification and interpretation of new lighting products (IEC TR 60972:1989 + A1:1991)

KS C 7524-2001(2016) 交通信号灯

Traffic signal lamps