29.160 旋转电机 标准查询与下载
共找到 316 条与 旋转电机 相关的标准，共 22 页
This part of IEC 72 applies to small built-in motors such as those usually intended for use in control devices.
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50
- ICS
- 29.160
- CCS
- 发布
- 2014-12-25
- 实施
This part of IEC 60034 specifies the IM Code, a classification of types of construction, mounting arrangements and the terminal box position of rotating electrical machines. Two systems of classification are provided as follows: – Code I (see section 2): An alpha-numeric designation applicable to machines with endshield bearing(s) and only one shaft extension. – Code II (see section 3): An all-numeric designation applicable to a wider range of types of machines including types covered by Code I. The type of machine not covered by Code II should be fully described in words. The relationship between Code I and Code II is given in annex A.
Rotating electrical machines - Part 7: Classification of types of constructions and mounting arrangements (IM Code)
- ICS
- 29.160
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard, which forms part of the ISO 8528 series, specifies criteria, including performance and test methods, for rotary uninterruptible power systems (UPS) arising out of a combination of mechanical and electrical rotating machines. This standard applies to power supplies primarily designed for supplying uninterrupted a.c. power to the consumer. When operated without input mains feed, the power is provided by stored energy and/or reciprocating internal combustion (RIC) engine and the output power is provided by one or more rotating electrical machines. This part 11 applies to a.c. power supplies primarily designed for supplying uninterruptible electrical power for stationary land and marine use, excluding supplies for aircraft, land vehicles or locomotives. It also excludes power supplies where the output power is generated by static converters. (See IEC 62040-3.) The use of a rotary UPS installation to improve the quality of a.c. power supply, to provide voltage and/or frequency conversion, and to provide peak shaving is also described. For some specific applications (for example, essential hospital supplies, offshore, non-stationary applications, high rise buildings, nuclear, etc.) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be used as a basis.
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
- ICS
- 29.160
- CCS
- 发布
- 2014-12-25
- 实施
This part of IEC 60034 applies to a.c. and d.c. machines and specifies a) rules for the identification of winding connection points; b) marking of winding terminals; c) direction of rotation; d) relationship between terminal markings and direction of rotation; e) terminal marking of auxiliary devices; f) connection diagrams of machines for common applications. Turbine-type synchronous machines are excluded from this standard.
Rotating electrical machines - Part 8: Terminal markings and direction of rotation
- ICS
- 29.160
- CCS
- 发布
- 2014-12-25
- 实施
IEC 60034-19:2014 applies to d.c. machines rated 1 kW and above operating on rectifier-fed power supplies, d.c. buses or other d.c. sources and provides standardized methods intended to determine characteristic quantities for conventional and rectifier-fed d.c. machines. These methods supplement the requirements in IEC 60034-1 and IEC 60034-2-1. The main changes with regard to the previous edition are as follows: - description of the procedure for black band testing has been detailed and clarified; - procedures for measurement of the magnetization curves under no-load and load conditions have been added.
Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies
- ICS
- 29.160
- CCS
- 发布
- 2014-11-21
- 实施
- 2015-01-30 (7)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) (IEC 60034-30-1:2014)
- ICS
- 29.160
- CCS
- 发布
- 2014-10-31
- 实施
이 표준은 특정 조건(정격 또는 기타의 것)으로 부하를 가할 수 없을 때 KS C IEC 60034-1에서 다룬 기기에 적용한다. 전동기와 발전기에 모두 적용할 수 있다.
Rotating electrical machines — Part 29: Equivalent loading and superposition techniques — Indirect testing to determine temperature rise
- ICS
- 29.160
- CCS
- K20
- 发布
- 2014-10-06
- 实施
- 2014/10/6
이 표준은 불평형 전압이 3상 농형 유도전동기의 성능에 미치는 영향을 규정한다.
Rotating electrical machines — Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
- ICS
- 29.160
- CCS
- K20
- 发布
- 2014-10-06
- 实施
- 2014/10/6
이 표준은 KS C IEC 60072-1에서 규정한 프레임 번호 56∼400의 저전압 3상 농형 유도전동기에 적용한다.이 표준은 단상 등가 회로도의 요소 값을 시험으로 얻는 절차를 수립하고 이러한 회로도의 표준 요소를 정의한다.?
Rotating electrical machines — Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
- ICS
- 29.160
- CCS
- K20
- 发布
- 2014-10-06
- 实施
- 2014/10/6
이 표준은 열적 전기적인 경과 요소가 중요한 경우에 있어서의 절연 시스템의 다른 영향에 의한 내구성의 평가를 위한 시험 절차를 기술하는 기술적인 보고서이다. 이 절차는 교류 기계 장치(50 MVA와 15 kV의 고정된 결선을 가진)에서 사용되거나 사용되도록 의도된 절연 시스템을 위해 제작되었다. 시험 절차는 본래 비교적이며, 그래서 어떤 절연 시스템의 성능은 증명된 동작 경험에서의 절연 시스템의 성능과 비교된다. 이 기술 보고서에서 기술된 평가는 압력 등급을 포함하지 않는다.?
Rotating electrical machines — Part 18-33: Functional evaluation of insulation systems — Test procedures for form-wound windings — Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
- ICS
- 29.160
- CCS
- 发布
- 2014-10-06
- 实施
- 2014/10/6
Rotating electrical machines — Part 29: Equivalent loading and superposition techniques — Indirect testing to determine temperature rise
- ICS
- 29.160
- CCS
- 发布
- 2014-10-06
- 实施
이 표준은 형상권 권선을 사용하여 1 kV에서 15 kV 사이와 50 MVA까지의 기기에서 사용되는 직류 혹은 교류 회전 기기의 사용 목적이나 그들의 사용과 절연 시스템의 전기적 내구성의 평가에 대한 시험 과정을 설명한 기술 보고서이다. 경험으로 증명된 표준 절연 시스템과 선출된 절연 시스템과의 비교 작업과 같이 시험 과정은 상대적이다.?
Rotating electrical machines — Part 18-32: Functional evaluation of insulation systems — Test procedures for form-wound windings — Evaluation by electrical endurance
- ICS
- 29.160
- CCS
- K20
- 发布
- 2014-10-06
- 实施
- 2014-10-06
이 표준은 폐루프(closed-loop) 여자 제어를 하는 동기기의 응답 특성을 조사하는 데 이용될 수 있는 방법을 간략하게 살펴본다.일반적인 여자계의 함수 블록선도(functional block diagram)(KS C IEC 60034-16-2의 그림 1)는 전력계의 안정도에 관한 연구에서 고려해야 할 다양한 여자계의 구성요소를 나타낸다.?
Rotating electrical machines — Part 16: Excitation systems for synchronous machines — Section 3: Dynamic performance
- ICS
- 29.160
- CCS
- K20
- 发布
- 2014-10-06
- 实施
- 2014-10-06
本标准规定了工业冷却塔用水轮机的术语和定义、性能保证、试验方法和验收准则。 本标准适用于处理水量 500 m³/h～6000 m³/h 的工业冷却塔驱动风机用水轮机现场验收规范。
Specification for on-site acceptance of water turbines for industrial cooling towers
- ICS
- 29.160
- CCS
- K 55
- 发布
- 2014-08-28
- 实施
- 2014-09-28
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
- ICS
- 29.160
- CCS
- 发布
- 2014-03-20
- 实施
Rotating electrical machines - Part 8: Terminal markings and direction of rotation
- ICS
- 29.160
- CCS
- 发布
- 2014-03-20
- 实施
Rotating electrical machines Part 4: Methods of experimentally determining the amplitude of synchronous machines
- ICS
- 29.160
- CCS
- 发布
- 2014
- 实施
Rotating electrical machines. Part 14. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity
- ICS
- 29.160
- CCS
- 发布
- 2014
- 实施
- 2016-03-01
Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems
- ICS
- 29.160
- CCS
- 发布
- 2014
- 实施
- 2016-03-01
Rotating electrical machines. Part 9. Noise limits
- ICS
- 29.160
- CCS
- 发布
- 2014
- 实施
- 2016-03-01
