29.160.10 旋转电机部件 标准查询与下载

GSO IEC 60136:2014 电机电刷和电刷架尺寸

This standard applies to brushes and brush-holders for electrical machinery. For the present it applies only to brushes and brush-holders for cylindrical commutators and slip rings.

Dimensions of brushes and brush-holders for electrical machinery

GSO IEC 60773:2014 测量电刷工作特性的测试方法和装置

This standard applies to test methods and apparatus for the measurement of the operational characteristics of brushes designed to operate on commutating and slip-ring machines under specified test conditions. It does not apply to brushes for small power machines and automotive machines.

Test methods and apparatus for measurement of the operational characteristics of brushes

GSO IEC/TR 60894:2014 执行测试以测量机器线圈和线圈的接触损耗的指南

The characteristics of an insulation system can be evaluated in terms of dielectric strength,insulation resistance, dielectric loss, etc. This reportis applicable to a method of measuring dielectric loss properties of the insulationsystem of the slot portions of new coils or bars for rotating electrical machines having rated voltageUNof 5 kV and above. The test is applicable to form wound coils or bars in which the insulation is cured before the winding is inserted in the stator. For tests on post-impregnated machines, see Appendix A.

Guide for test procedure for the measurement of loss tangent of coils and bars for machine windings

KS C IEC 60119-2014(2019) 建议多晶半导体整流堆和装

Recommendations for polycrystalline semiconductor rectifier stacks and equipments

KS C IEC 60356-A:2014 换向器和滑环的尺寸

이 표준은 회전기기의 정류자 편에 대한 구리막대를 다룬다. 다만, 다음은 예외로 한다.a) 평면 정류자의 편b) 평평한 면을 지니지 않은 편?

Dimensions for commutators and slip-rings

KS C IEC 60560-2014(2019) 定义和电刷支架的术语

Definition and terminology of brush-holders

KS C IEC 60136-A:2014 电机用电刷及刷握的尺寸

Dimensions of brushes and brush-holders for electrical machinery

KS C IEC 60560:2014 电刷架的定义和术语

이 표준은 전기 기기용 브러시 홀더에 적용한다.

Definition and terminology of brush-holders

KS C IEC 60119:2014 多晶半导体整流堆和设备的推荐标准

이 표준은 2 000 Hz(c/s) 이하의 주파수에서 a.c. 전원으로부터 d.c. 전력을 공급하는 데 사용되는 셀레늄 및 산화구리 스택, 정류기 및 정류기 장비에 적용된다. 이 표준은 통신 장치에 대한 전원을 위해 사용되는 것은 제외하고 통신 정류기에는 적용되지 않으며 측정 기기의 보조로 사용되는 정류기에도 적용되지 않는다.?

Recommendations for polycrystalline semiconductor rectifier stacks and equipments

KS C IEC 60276-2014(2019) 碳刷 电刷架 换向器和滑环的定义和术语

Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings

KS C IEC 60276:2014 碳刷.刷握.换向器和滑环的定义和名称

이 표준은 전기 기계용 탄소 브러시와 브러시 홀더에 적용한다. 현재로서는 이 표준은 원통형 정류자와 슬립링용 탄소 브러시와 브러시 홀더에만 적용한다.

Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings

JB/T 3334.2-2013 水轮发电机用制动器 第2部分:水轮发电机用卧式制动器

JB/T 3334的本部分规定了水轮发电机用卧式活塞式机械制动器(以下简称制动器)的结构型式和型号、基本参数及基本尺寸、技术要求、试验方法与检验规则、包装、运输及贮存。本部分适用于工作介质为压缩空气或汽轮机油的制动器。

Brake for hydro generators.Part 2: Horizontal brake for hydro generators

JB/T 3334.1-2013 水轮发电机用制动器 第1部分:水轮发电机用立式制动器

JB/T 3334的本部分规定了水轮发电机用立式活塞式机械制动器(以下简称制动器)的结构型式和型号、基本参数及基本尺寸、技术要求、试验方法与检验规则、包装、运输及贮存。本部分适用于有制动和顶起转动部分要求的立式水轮发电机的制动器。对用于无顶起功能要求、不设锁定机构的灯泡式水轮发电机的制动器可参照执行。

Brake for hydro generators.Part 1: Vertical brake for hydro generators

KS C IEC 60413-2013 确定电机电刷材料物理性能的测试程序

Test procedures for determining physical properties of brush materials for electrical machines

KS C IEC 60413:2013 测定电机用电刷材料物理性能试验规程

Test procedures for determining physical properties of brush materials for electrical machines

KS C IEC 60773:2013 测定电刷运行特性的试验方法和设备

Test methods and apparatus for the measurement of the operational characteristics of brushes

KS C IEC 60356:2013 换向器与集电环尺寸

Dimensions for commutators and slip-rings

KS C IEC 60136:2013 电机的电刷和刷握尺寸

Dimensions of brushes and brush-holders for electrical machinery

ANSI/EASA AR100-2010 电气设备检修用推荐操作规程

Recommended Practice for the Repair of Electrical Apparatus

GOST R 53617-2009 发电机炭刷.结构.类型和尺寸规格

Carbon brushes for electrical machines. Construction. Types and dimensions