29.160.40 发电机组 标准查询与下载

BS 7698-8:1996 往复式内燃机驱动的交流发电机组.低功率发电机组要求和试验

This part of ISO 8528 defines requirements, minimum performances and type tests for low-power generat-ing sets driven by reciprocating internal combustion engines for land and marine use (domestic, recre-ational and industrial application), excluding generating sets used on aircraft. It concerns mainly low-power generating sets driven by reciprocating internal combustion engines for the generation of single or multiphase alternating current or direct current up to 500 V. The generating sets are standard manufactured sets that can be selected from a commercial catalogue or leaflet. In this part of ISO 8528, "low power" is taken to mean power of a magnitude up to approximately 10 kW. NOTE 1 An exact determination of a power limit is not possible. Low-power generating sets for the purpose of this standard are determined by the following special fea-tures: — the users normally are laymen (for further details see 3.1); — the complete generating set is usually transport-able, or mobile; — the electrical output is connected by plugs and sockets (except for extra low voltages; see 6.6.3); — the generating set is ready for use without any additional installation work by the user. Generating sets for special applications or of higher rated power conforming to the above special features may, by agreement between manufacturer and cus-tomer, be tested in accordance with this part of ISO 8528. If supplementary stipulations are required for certain applications this should be done taking this part of ISO 8528 as a basis. This part of ISO 8528 deals with the special require-ments of test and safety design which should be ob-served in addition to the definitions and requirements laid down in ISO 8528 parts 1 to 6, where applicable. Furthermore it lays down safety requirements in order to protect the user from danger.

Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets

DIN 6280-12:1996 发电机组.连续供电.第12部分:带和不带活塞式内燃机的动力USV设备

The document defines with due regard to the requirements specified in DIN 6280-1 to DIN 6280-9 the special requirements and test for generating sets and machine sets for uninterruptible power supply or to ensure the required quality of an a.c. power supply.

Generating sets - Uninterruptible power supply - Part 12: Dynamic UPS systems with and without reciprocating internal combustion engines

ISO 8528-8:1995 往复式内燃交流发电机组 第8部分:小功率发电机组技术要求和试验

Defines requirements and type tests for low-power generating sets (up to approximately 10 kW) driven by reciprocating internal combustion engines, excluding generating sets used on aircraft.

Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets

SANS 8528-7:1994 往复式内燃机驱动交流发电机组．第7部分：尺寸和设计的技术声明

Specifies the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6 (published in South Africa as SANS 8

Reciprocating internal combustion engine driven alternating current generating sets Part 7: Technical declarations for specification and design

NRS 024-1-1994 柴油交流发电机组．第1部分：固定装置用柴油交流发电机组

Covers the requirements for diesel alternator sets but is also applicable to other reciprocating internal combustion (RIC) engine-driven alternator sets for use in fixed installations in non-explosive atmospheres.

Diesel alternator sets Part 1: Diesel alternator sets for fixed installations - Preferred requirements for applications in their organizations by the dc and standby equipment representative user group

NRS 024-2-1994 柴油交流发电机组．第2部分：移动式或拖车车载柴油交流发电机组

Specifies the requirements for mobile or trailer-mounted diesel alternator sets for use as mobile prime sources of electrical energy or as mobile sets for temporary or emergency use. Also specifies the characteristics of a mobile or trailer-mounted diese

Diesel alternator sets Part 2: Mobile or trailer-mounted diesel alternator sets - Preferred requirements for applications in their organizations by the DC and standby equipment representative user group

NF E37-305:1994 循环往复式内燃机驱动交流电电机组.第5部分:发电机组

Reciprocating internal combustion engine driven alternating current generating setts. Part 5 : generating sets.

NF E37-302:1994 往复式内燃机驱动交流发电机组.第2部分:发动机

Reciprocating internal combustion engine driven alternating current generating sets. Part 2 : engines.

NF E37-306:1994 往复式内燃机驱动的交流发电机组.第6部分:试验方法

Reciprocating internal combustion engine driven alternating current generating sets. Part 6 : test methods.

NF E37-304:1994 往复式内燃机驱动的交流发电机组.第4部分:控制装置和转换开关装置

Reciprocating internal combustion engine driven alternating current generating sets. Part 4 : controlgear and switchgear.

NF E37-303:1994 循环往复式内燃机驱动交流发电机组.第3部分:发电机组的交流发电机

Reciprocating internal combustion engine driven alternating current generating. Part 3 : alternating current generators for generating sets.

NF E37-301:1994 往复式内燃机驱动的交流发电机组.第1部分:使用、额定值和性能

Reciprocating internal combustion engine driven alternating current generating sets. Part 1 : application, ratings and performance.

ISO 8528-7:1994 往复式内燃交流发电机组 第7部分:技术规格和设计说明

Establishes the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6. Applies to a.c. current generating sets driven by RIC engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives.

Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design

BS 7698-4:1993 住复式内燃机驱动交流发电机组.第4部分:控制设备和开关设备规范

This part of ISO 8528 specifies criteria for control-gear and switchgear for generating sets with reciprocating internal combustion engines. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding gener-ating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essen-tial hospital supplies, high-rise buildings, etc.) sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be re-garded as a basis. For generating sets driven by other prime movers (e.g. sewage gas engines, steam engines) this part of ISO 8528 should be applied as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Specification for controlgear and switchgear

BS 7698-1:1993 往复式内燃机驱动的交流发电机组.第1部分:应用、额定值和性能规范

This part of ISO 8528 defines various classifications for the applications, ratings and performance which arise out of the combination of generating sets con-sisting of a reciprocating internal combustion (RIC) engine, alternating current (a.c.) generator, control-gear, switchgear and auxiliary equipment. It applies to a.c. generating sets driven by RIC en-gines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essen-tial hospital supplies, high-rise buildings, etc.) sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be re-garded as a basis. For other reciprocating-type prime movers (e.g. sewage-gas engines, steam engines), the provisions of this part of ISO 8528 should be used as a basis. The generating sets according to this International Standard are used to generate electrical power for continuous, peak-load and standby supplies. The classifications laid down in this part of ISO 8528 are intended to help understanding between manufac-turer and customer.

Reciprocating internal combustion engine driven alternating current generating sets - Specification for application, ratings and performance

BS 7698-6:1993 往复式内燃机驱动交流发电机组.第6部分:试验方法

This part of ISO 8528 specifies test methods for the characteristics of an entire generating set. Existing test methods for the engine (ISO 3046-2 and ISO 3046-3) and generator (IEC 34-2) should be used for those components. The generating set manufac-turer is responsible for specifying these character-istics and the tests to be performed. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding gener-ating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essen-tial hospital supplies, high-rise buildings, etc.) sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be re-garded as a basis. For a.c. generating sets driven by other reciprocat-ing type prime movers (e.g. sewage gas engines, steam engines) this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Test methods

BS 7698-2:1993 往复式内燃机驱动的交流发电机组.第2部分:发动机规范

This part of ISO 8528 specifies the principal charac-teristics of a reciprocating internal combustion (RIC) engine when used for alternating current (a.c.) gen-erating set applications. It applies to RIC engines for a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and loco-motives. For some specific applications (for example, essen-tial hospital supplies, high rise buildings, etc.), sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be re-garded as a basis. The terms which define the speed governing and the speed characteristics of RIC engines are listed and explained where they apply specifically to the use of the engine for driving generators. For other reciprocating-type prime movers (e.g. sewage gas engines, steam engines), the provisions of this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Specification for engines

BS 7698-3:1993 往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机规范

This part of ISO 8528 specifies the principal charac-teristics of alternating current (a.c.) generators un-der the control of their voltage regulators when used for generating set applications. It supplements the requirements of IEC 34-1. NOTE 1 At present no International Standard is avail-able for asynchronous generators. When such an Inter-national Standard is published, this part of ISO 8528 will be revised accordingly. See subclause 12.2. This part of ISO 8528 applies to a.c. generators for a.c. generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essen-tial hospital supplies, high-rise buildings, etc.) sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be re-garded as a basis. For a.c. generating sets driven by other reciprocating-type prime movers (e.g. sewage gas engines, steam engines) the provisions of this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Specification for alternating current generators for generating sets

BS 7698-5:1993 往复式内燃机驱动交流发电机组.第5部分:发电机组规范

This part of ISO 8528 defines terms and specifies design criteria arising out of the combination of a recipro-cating internal combustion (RIC) engine and an alternating current (a.c.) generator when operating as a unit. It applies to a.c. generating sets driven by RIC engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essential hospital supplies, high-rise buildings, etc.) supplemen-tary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis. For generating sets driven by other reciprocating-type prime movers (e.g. sewage gas engines, steam en-gines), the provisions of this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Specification for generating sets

UL 1248-1993 旅游车用发动机和发电机组合机组

Engine-generator assemblies for use in recreational vehicles