29.160.40 发电机组 标准查询与下载



共找到 237 条与 发电机组 相关的标准,共 16

Grid cinnected stall regulation wind turbine generator system Technical requirement

ICS
29.160.40
CCS
K52
发布
2005-6-10
实施
2005-8-1

Reciprocating internal combustion engine driven alternating current generating sets. Rotary uninterruptible power systems. Performance requirements and test methods

ICS
29.160.40
CCS
发布
2005-10-31
实施
2005-10-31

本部分规定了对进出口往复式内燃机驱动的交流发电机组的要求、检验及判定。 本部分适用于陆用和船用发动机驱动的交流发电机组的进出口检验。 对于某些特殊用途(例如必要的医院供电、高层建筑等)或其他型式的往复原动机(例如沼气发动机、蒸气发动机),本部分也可参照执行。

Rules for the inspection of power equipment for import and export--Part 2:Reciprocating internal combustion engine driven AC generator sets

ICS
29.160.40
CCS
K52
发布
2005-08-18
实施
2006-02-01

This part of ISO 8528 defines requirements, minimum performances and type tests for low-power generating sets driven by reciprocating internal combustion engines for land and marine use (domestic, recreational and industrial application), excluding generating sets used on aircraft.

Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets

ICS
29.160.40
CCS
发布
2005-01-27
实施
2005-01-27

Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods (IEC 88528-11:2004); German version EN 88528-11:2004

ICS
29.160.40
CCS
F21
发布
2005-01
实施
2005-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 1. Application, ratings and performance

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 3. Alternating current generators for generating sets

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 8. Requirements and tests for low-power generating sets

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 4. Controlgear and switchgear

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

Reciprocating internal combustion engine driven alternating current generating sets. Part 12. Emergency power supply to safety services

ICS
29.160.40
CCS
发布
2005
实施
2007-01-01

This International Standard@ which forms part of the ISO 8528 series@ specifies criteria@ including performance and test methods@ for rotary uninterruptible power systems (UPS) arising out of a combination of mechanical and electrical rotating machines. This standard applies to power supplies primarily designed for supplying uninterrupted a.c. power to the consumer. When operated without input mains feed@ the power is provided by stored energy and/or reciprocating internal combustion (RIC) engine and the output power is provided by one or more rotating electrical machines. This part 11 applies to a.c. power supplies primarily designed for supplying uninterruptible electrical power for stationary land and marine use@ excluding supplies for aircraft@ land vehicles or locomotives. It also excludes power supplies where the output power is generated by static converters. (See IEC 62040-3.) The use of a rotary UPS installation to improve the quality of a.c. power supply@ to provide voltage and/or frequency conversion@ and to provide peak shaving is also described. For some specific applications (for example@ essential hospital supplies@ offshore@ non-stationary applications@ high rise buildings@ nuclear@ etc.) supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods

ICS
29.160.40
CCS
发布
2004-03
实施
2004-03-29

Applies to electronic uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is to be used with IEC 60950-1 which is referred to in this standard as "RD".

Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations

ICS
29.160.40
CCS
K85
发布
2004-02
实施

Applies to electronic uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is to be used with IEC-60950-1 which is referred to in this standard as "RD".

Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas

ICS
29.160.40
CCS
K85
发布
2004-02
实施

This recommended practice defines the process of commissioning building electrical systems and provides sample guidelines for attaining optimum system performances which conform to design, specifications, and industry-accepted codes and standards.

Recommended Practice for Commissioning Building Electrical Systems

ICS
29.160.40
CCS
K52
发布
2004
实施

This is Technical Corrigendum 1 to IEC 62040-3-1999 (Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements )

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

ICS
29.160.40
CCS
K85
发布
2003-07
实施

Intends to cover the application of drive systems for use in electric power generation stations designed for connection to medium voltage electric service rated between 2400 V and 13800 V. Includes ASD terminology, theory of operation, and a discussion of the factors that can influence equipment selection.

Guide for the Application of AC Adjustable-Speed Drives on 2 400 13 800 V Auxiliary Systems in Electric Power Generating Stations

ICS
29.160.40
CCS
K52
发布
2003-06-12
实施

This standard specifies the outline of investigation for portable engine-generator assemblies

(Draft)(DRAFT)UL Standard for Safety for Portable Engine-Generator Assemblies Proposed First Edition; Comments Due: April 30, 2003

ICS
29.160.40
CCS
K20
发布
2003-02-28
实施

本标准规定了大型汽轮发电机交流励磁机励磁系统的使用条件、系统性能、部件性能、试验项目、 技术文件以及包装、运输和储存等。 本标准适用于 200MW 及以上汽轮发电机交流励磁机励磁系统,200MW 以下的交流励磁机励磁系 统可参照执行。

Specification for A.C.exciter rectifier excitation system for large turbine generators

ICS
29.160.40
CCS
K21
发布
2003-01-09
实施
2003-06-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号