29.220.10 标准查询与下载

IEC 60086-2:2015 原电池.第2部分:物理和电气规格

This part of IEC 60086 is applicable to primary batteries based on standardized electro-chemical systems. It specifies the physical dimensions; the discharge test conditions and discharge performance requirements.

Primary batteries - Part 2: Physical and electrical specifications

DIN EN 60086-4:2015 原电池.第4部分:锂电池的安全(IEC 60086-4-2014);德文版本EN 60086-4-2015

Primary batteries - Part 4: Safety of lithium batteries (IEC 60086-4:2014); German version EN 60086-4:2015

IEC 60086-1:2015 RLV 原电池.第1部分:总则

Primary batteries - Part 1: General

IEC 60086-1:2015 原电池.第1部分:总则

This part of IEC 60086 is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. NOTE The requirements justifying the inclusion or the ongoing retention of batteries in the IEC 60086 series are given in Annex A. The object of this part of IEC 60086 is to benefit primary battery users, device designers and battery manufacturers by ensuring that batteries from different manufacturers are interchangeable according to standard form, fit and function. Furthermore, to ensure compliance with the above, this part specifies standard test methods for testing primary cells and batteries.

Primary batteries - Part 1: General

LST EN 60086-4-2015 原电池. 第4部分: 锂电池的安全性(IEC 60086-4-2014)

Primary batteries - Part 4: Safety of lithium batteries (IEC 60086-4:2014)

BS EN 60086-4:2015 原电池.第4部分:锂电池的安全性

Primary batteries. Safety of lithium batteries

GSO IEC 62281:2014 运输过程中一次和二次锂电池和电芯的安全

This International Standard specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this standard do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different standards may apply for lithium-ion traction battery systems used for electrically propelled road vehicles.

Safety of primary and secondary lithium cells and batteries during transport

KS C 8513-2014 碱性一次电池和电池组

이 표준은 1차 전지 중 알칼리 1차 전지(이하 ‘건전지’라 한다.)에 대하여 규정한다.

Alkaline primary cells and batteries

IEC 60086-4:2014 原电池.第4部分:锂电池的安全性

This Part of IEC 60086 specifies tests and requirements for primary lithium batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. NOTE Primary lithium batteries that are standardized in IEC 60086-2 are expected to meet all applicable requirements herein. It is understood that consideration of this part of IEC 60086 might also be given to measuring and/or ensuring the safety of non-standardized primary lithium batteries. In either case@ no claim or warranty is made that compliance or non-compliance with this standard will fulfil or not fulfil any of the user's particular purposes or needs.

Primary batteries - Part 4: Safety of lithium batteries

JIS C 8514:2014 含水电解质的原电池安全性

Safety of primary batteries with aqueous electrolyte

GSO IEC 60086-3:2013 主电池 第3部分：手表电池

IEC 60086-3:2011 specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was used. This third edition cancels and replaces the second edition (2004) and constitutes a technical revision. The major technical changes with respect to the previous edition are the drawings, a review of the table of electrochemical systems and a harmonization of the marking clause with the other standards of the IEC 60086 series. Moreover, the table of the leakage levels was extended by adding drawings with better visualization. This publication is published as a double logo standard. The contents of the corrigendum of September 2011 have been included in this copy. This bilingual version (2014-01) corresponds to the monolingual English version, published in 2011-01. Keywords: requirements and information for primary watch batteries.

Primary batteries -- Part 3: Watch batteries

DB44/T 1202-2013 电动汽车用锂离子动力电池系统技术条件

本标准规定了电动汽车用锂离子动力电池系统的技术要求、试验方法、检验规则及标志、包装、运输和贮存要求。 本标准适用于为电动汽车（包括纯电动汽车、混合动力汽车等）提供驱动力的锂离子电池系统。 本标准不适用于由镍氢电池和铅酸电池等其他非锂离子电池组成的电池系统。

Technical specifications for lithium-ion power battery systems for electric vehicles

LST EN 62281-2013 运输途中原电池和二次锂电池及蓄电池组的安全 (IEC 62281-2012)

Safety of primary and secondary lithium cells and batteries during transport (IEC 62281:2012)

GSO IEC 60086-2:2013 原电池 第2部分：物理和电气规格

IEC 60086-2:2011 is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions; and the discharge test conditions and discharge performance requirements. Significant changes from the previous edition are the deletion of eight battery types from this standard, the addition of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system (zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery (6LP3146), addition of a common designation reference as Annex D and general adjustment of application tests and their minimum average duration values to reflect changes in battery usage.

Primary batteries - Part 2: Physical and electrical specifications

GSO IEC 60086-5:2013 干原电池 第5部分：水系电解质电池的安全性

IEC 60086-5:2011 specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe operation under intended use and reasonably foreseeable misuse. The major technical changes with respect to the previous edition are the test requirements and the harmonization of the marking clause with the other standards of the IEC 60086 series. Moreover, the table of safety pictograms was added as Annex C.

Primary batteries - Part 5: Safety of batteries with acqueous electrolyte

GSO IEC 60086-1:2013 原电池 第1部分：概述

IEC 60086-1:2011 is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. The object of IEC 60086-1 is to benefit primary battery users, device designers and battery manufacturers by ensuring that batteries from different manufacturers are interchangeable according to standard form, fit and function. The major technical changes with respect to the previous edition are: - the clarification of the humidity controls for testing various battery types; - the modification of the standardization guidelines to allow for standardization of electrochemical systems; - the standardization of the lithium sulfuryl chloride (LiSO2Cl2) and lithium sulphur dioxide (LiSO2) electrochemical systems.

Primary batteries - Part 1: General

JIS C 8515:2013 原电池.物理和电器规范

Primary batteries.Physical and electrical specifications

JIS C 8500:2013 原电池.总则

Primary batteries -- General

ANSI C18.3M Part 1-2013 便携式锂原电池和蓄电池.总则和规格

Portable Lithium Primary Cells and Batteries - General and Specifications

SNI IEC 60086-4:2013 原电池-第4部分：锂电池的安全

Primary batteries - Part 4: Safety of lithium batteries