29.220.20 标准查询与下载

OVE EN 50342-4-2021 铅酸启动电池 第4部分：重型车辆用电池的尺寸（德文版）

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles (german version)

DIN EN IEC 63193:2021 用于轻型车辆推进动力的铅酸电池-一般要求和测试方法（IEC 63193:2020）；德文版 EN IEC 63193:2021

This document is applicable to lead-acid batteries powering electric two-wheelers (mopeds) and three-wheelers (e-rickshaws and delivery vehicles), and also to golf cars and similar light utility and multi-passenger vehicles.

Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test (IEC 63193:2020); German version EN IEC 63193:2021

DS/EN 50342-1:2021 铅酸启动蓄电池 第1部分：一般要求和试验方法

Lead-acid starter batteries – Part 1: General requirements and methods of test

EN 50342-1:2015/A2:2021 铅酸起动电池组.第1部分:一般要求和试验方法 包含修改件A2,2021

TC21X working group 3 has been agree to implement following changes to EN 50342-1:2015/1:2018 - Deletion of high current discharge after water consumption test. This is not needed as a dedicated corrosion test is available in the document. - Limitation of the maximum discharge time in cranking performance test. Batteries with high power capability might be damaged if discharge until the cut off voltage of 6,0 V is reached. To prevent this the maximum discharge time of the second step of the cranking performance test has been limited to 180 s.

Lead-acid starter batteries - Part 1: General requirements and methods of test

DIN EN 50342-4:2021 铅酸启动电池 第4部分：重型车辆用电池的尺寸；德文版 EN 50342-4:2020

This document is applicable to lead-acid batteries used for heavy vehicles. The object of this document is to specify the European requirements of the main dimensions of starter batteries.

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles; German version EN 50342-4:2020

PN-EN IEC 62485-6-2021-09 E 二次电池和电池装置的安全要求 第6部分：牵引应用中锂离子电池的安全运行（IEC 62485-6:2021）

Safety requirements for secondary batteries and battery installations - Part 6: Safe operation of lithium-ion batteries in traction applications (IEC 62485-6:2021)

KS C 8544-2021 密封镍氢二次电池

Sealed nickel-metal hydride secondary cells

KS C IEC 61427-2:2021 可再生能源储存用二次电池和蓄电池组.一般要求和试验方法.第2部分:并网应用

Secondary cells and batteries for renewable energy storage —General requirements and methods of test —Part 2: On-grid applications

KS C IEC 61427-2-2021 可再生能源储存用二次电池和蓄电池组.一般要求和试验方法.第2部分:并网应用

Secondary cells and batteries for renewable energy storage —General requirements and methods of test —Part 2: On-grid applications

KS C 8518-2021 固定式密封铅酸蓄电池（阀控型）

Stationary sealed lead-acid batteries(valve regulated types)

PN-EN 50342-4-2021-09 E 铅酸起动电池 第4部分：重型车辆用电池尺寸

Lead-acid starter batteries -- Part 4: Dimensions of batteries for heavy vehicles

BS PD IEC TS 61044:2021 铅酸牵引蓄电池的机会充电

Opportunity charging of lead-acid traction batteries

BS IEC 60095-2:2021 铅酸起动蓄电池组. 第2部分: 蓄电池组尺寸和端子尺寸及标记

Lead-acid starter batteries. Dimensions of batteries and dimensions and marking of terminals

PN-EN IEC 62485-5-2021-08 E 二次电池和电池安装的安全要求 第5部分：固定式锂离子电池的安全操作（IEC 62485-5:2020）

Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries (IEC 62485-5:2020)

IEC 60095-4:2021 铅酸起动器蓄电池组. 第4部分: 重型车用蓄电池组的尺寸

This part of IEC 60095 is applicable to lead-acid batteries used for starting, lighting and ignition of heavy trucks, commercial vehicles, busses and agricultural trucks. The object of this document is to specify global requirements of the main dimensions of starter batteries for

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles

GSO IEC 62877-2:2021 通风式铅酸蓄电池的电解液和水 第2部分：水的要求

IEC 62877-2:2016 applies to water for use with vented lead-acid cells and batteries, i.e. water for preparation of electrolyte and for topping up cells or batteries. The purity of refilling water has to meet higher requirements compared to filling electrolyte, because the impurities in the operating electrolyte will be gradually increased by regular addition of water. This international standard lays down requirements of the composition, purity and properties of water in the absence of specific recommendations from the manufacturer.

Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water

GSO IEC 62660-3:2021 用于电动道路车辆推进的二次锂离子电池 第3部分：安全要求

IEC 62660-3:2016 specifies test procedures and the acceptance criteria for safety performance of secondary lithium-ion cells and cell blocks used for the propulsion of electric vehicles (EV) including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This International Standard intends to determine the basic safety performance of cells used in a battery pack and system under intended use, and reasonably foreseeable misuse or incident, during the normal operation of the EV. The safety requirements of the cell in this standard are based on the premise that the cells are properly used in a battery pack and system within the limits for voltage, current and temperature as specified by the cell manufacturer (cell operating region). The evaluation of the safety of cells during transport and storage is not covered by this standard.

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements

GSO IEC TR 62660-4:2021 用于电动道路车辆推进的二次锂离子电池 第4部分：IEC 62660-3 内部短路测试的候选替代测试方法

IEC TR 62660-4:2017(E) provides the test data on the candidate alternative test methods for the internal short circuit test according to 6.4.4.2.2 of IEC 62660-3:2016. The internal short circuit test in this document is intended to simulate an internal short circuit of a cell caused by the contamination of conductive particle, and to verify the safety performance of the cell under such conditions. This document is applicable to the secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles (EV) including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This document does not cover cylindrical cells.

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 4: Candidate alternative test methods for the internal short circuit test of IEC 62660-3

GSO IEC 62877-1:2021 通风式铅酸蓄电池的电解液和水 第1部分：电解液的要求

IEC 62877-1:2016 applies to electrolyte and their components used for filling vented lead-acid batteries, for example dry charged cells or batteries, and for electrolyte replacement or electrolyte density adjustment of batteries in operation. This international standard defines the composition, purity and properties of electrolyte to be applied where specific instructions from the battery manufacturer are not available. The contents of the corrigendum of May 2017 have been included in this copy.

Electrolyte and water for vented lead acid accumulators - Part 1: requirements for electrolyte

GSO IEC 62485-3:2021 二次电池和电池装置的安全要求 第3部分：牵引电池

IEC 62485-3:2014 applies to secondary batteries and battery installations used for electric vehicles, e.g. in electric industrial trucks (including lift trucks, tow trucks, cleaning machines, automatic guided vehicles), in battery powered locomotives, in electric vehicles (e.g. goods vehicles, golf carts, bicycles, wheelchairs), and does not cover the design of such vehicles. It provides requirements on safety aspects associated with the installation, use, inspection, maintenance and disposal of batteries. This edition includes the following significant technical changes with respect to the previous edition: a) a comprehensive revision of Clause 6, presenting a unified and changed formula for the calculation of the required ventilation air flow during battery charging; b) addition of requirements for properties of floor material and battery changing equipment in Clause 9.

Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries