29.220.30 标准查询与下载
共找到 455 条与 相关的标准，共 31 页
IEC 63118-1:2024 specifies the general tests and requirements for the performance of lithium secondary batteries with a nominal voltage of 12 V permanently installed in road vehicles not for propulsion. The replacement of secondary batteries permanently installed in road vehicles not for propulsion is covered by this document. The following are typical applications that utilize the batteries under the scope of this document: power source for the starting of internal combustion engines, lighting, stop and start function, on-board auxiliary equipment and energy absorption for regeneration from braking. This document includes: - electrical characteristics tests methods and requirements; - a life duration tests method.
12 V lithium-ion secondary batteries for automotive starting, lighting, ignition (SLI) applications and auxiliary purposes - Part 1: General requirements and methods of test
- ICS
- 29.220.30
- CCS
- 发布
- 2024-03-29 (7)
- 实施
- 2024-06-27 (7)
IEC 63057:2020 specifies safety tests and requirements for secondary lithium batteries permanently installed in road vehicles not for the propulsion. Replacement secondary batteries permanently installed in road vehicles not for propulsion are covered by this document. The following are typical applications that utilize the batteries under the scope of this document: a power source for the starting of internal combustion engines, lighting, on-board auxiliary equipment, and energy absorption for regeneration from braking. This document applies to batteries with a maximum voltage less than or equal to 60 V DC. The batteries primarily used for propulsion of electric vehicles (EVs), including battery electric vehicles (BEVs), hybrid electric vehicles (HEVs), and plug-in hybrid electric vehicles (PHEVs) are not covered by this document.
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion
- ICS
- 29.220.30
- CCS
- 发布
- 2024-01-31
- 实施
IEC 63056:2020 specifies requirements and tests for the product safety of secondary lithium cells and batteries used in electrical energy storage systems (Figure 2) with a maximum DC voltage of 1 500 V (nominal). Basic safety requirements for the secondary lithium cells and batteries used in industrial applications are included in IEC 62619. This document provides additional or specific requirements for electrical energy storage systems. Since this document covers batteries for various electrical energy storage systems, it includes those requirements which are common and minimum to the electrical energy storage systems. Examples of appliances that are within the scope of this document are: • telecommunications, • central emergency lighting and alarm systems, • stationary engine starting, • photovoltaic systems, • home (residential) energy storage systems (HESS), and • large energy storage: on-grid/off-grid. This document applies to cells and batteries for uninterruptible power supplies (UPS). This document does not apply to portable systems 500 Wh or below, which are covered by IEC 61960-3. The contents of the corrigendum of June 2021 have been included in this copy.
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems
- ICS
- 29.220.30
- CCS
- 发布
- 2024-01-31
- 实施
IEC 62619:2022 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications, including stationary applications. When there exists an IEC International Standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence (e.g., IEC 62660 series on road vehicles). The following are some examples of applications that utilize cells and batteries under the scope of this document: - Stationary applications: telecom, uninterruptible power supplies (UPS), electrical energy storage system, utility switching, emergency power, and similar applications. - Motive applications: forklift truck, golf cart, automated guided vehicle (AGV), railway vehicles, and marine vehicles, with the exception of road vehicles.
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
- ICS
- 29.220.30
- CCS
- 发布
- 2024-01-31
- 实施
Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications — Guidance o
- ICS
- 29.220.30
- CCS
- 发布
- 2023-11-24
- 实施
Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for secondary lithium cells and batteries, for use in industrial applications
- ICS
- 29.220.30
- CCS
- 发布
- 2023-08-14
- 实施
BS EN IEC 62620. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for use in industrial applications
- ICS
- 29.220.30
- CCS
- 发布
- 2023-08-07
- 实施
- 2023-08-07
Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications
- ICS
- 29.220.30
- CCS
- 发布
- 2023-05-12
- 实施
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications
- ICS
- 29.220.30
- CCS
- 发布
- 2023-05-12
- 实施
IEC 63218:2021 provides requirements and recommendations on environmental aspects of secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications (hereafter referred to as “relevant secondary cells and batteries”). Relevant secondary cells and batteries are specified within the scopes of IEC 61960-3, IEC 61960-4, IEC 61951-1, and IEC 61951-2. NOTE Portable applications are defined in IEC 61960-3 as comprising hand-held equipment, transportable equipment, and movable equipment. See IEC 61960-3 for examples. This document is not intended to be applied to batteries embedded in end-use products. Once the embedded battery is removed from an end-use product, this document becomes applicable to it. The safety and control circuits as well as cases associated with relevant secondary batteries, except for those forming part of an end-use product, are covered by this document as parts of the relevant secondary batteries.
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications - Guidance on environmental aspects
- ICS
- 29.220.30
- CCS
- 发布
- 2023-05-03
- 实施
IEC-63115-2:2021 specifies designations, tests and requirements for the safe operation of sealed nickel-metal hydride cells and batteries used in industrial applications excluding road vehicles. Since this document covers batteries for various industrial applications, it includes those requirements which are common and minimum to the various applications.
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety
- ICS
- 29.220.30
- CCS
- 发布
- 2023-05-03
- 实施
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed cells and batteries for portable applications - Nickel-cadmium
- ICS
- 29.220.30
- CCS
- 发布
- 2023-03-31
- 实施
- 2023-03-31
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium
- ICS
- 29.220.30
- CCS
- 发布
- 2023-02-06
- 实施
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium
- ICS
- 29.220.30
- CCS
- 发布
- 2023-02-06
- 实施
This document specifies the marking, designation, tests and requirements for sealed nickel-metal hydride cells and batteries used in industrial applications, including stationary applications. When an IEC International Standard specifying test conditions and requirements for cells used in special applications is in conflict with this document, the former takes precedence (e.g. The following are some examples of applications that utilize the cells and batteries falling under the scope of this document. • Stationary applications: telecom, uninterruptible power supplies (UPS), electrical energy storage system, utility switching, emergency power and similar applications. • Motive applications: fork-lift truck, golf cart, AGV (Automatic Guided Vehicle), railway, and marine, excluding road vehicles. Since this document covers batteries for various industrial applications, it includes those requirements that are common and minimum to the various applications. This document applies to cells and batteries. If the battery is divided into smaller units, the smaller unit can be tested as representative of the battery. The manufacturer clearly declares the tested unit. The manufacturer can add functions to the tested unit that are present in the final battery.
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride cells and batteries for use in industrial applications - Performance
- ICS
- 29.220.30
- CCS
- 发布
- 2023-01-31
- 实施
- 2023-01-31
Secondary cells and batteries containing alkaline or other non acid electrolytes. Secondary sealed cells and batteries for portable applications - Nickel-metal hydride
- ICS
- 29.220.30
- CCS
- 发布
- 2022-12-13
- 实施
- 2022-12-13
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance
- ICS
- 29.220.30
- CCS
- 发布
- 2022-11-07
- 实施
Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performanc
- ICS
- 29.220.30
- CCS
- 发布
- 2022-11-07
- 实施
Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
- ICS
- 29.220.30
- CCS
- 发布
- 2022-10-27
- 实施
