29.260.99 特殊工作条件用其他电气设备 标准查询与下载

T/GXAS 654-2023 10 kV直流试送仪技术条件

本文件界定了10 kV直流试送仪涉及的术语和定义，规定了直流试送仪的型号编制规则、技术要求、标志、包装、运输、贮存的要求，描述了相应的试验方法、检验规则。 本文件适用于10 kV架空线路及混合线路直流试送仪生产、检验及使用。

Technical condition for 10 kV direct current trial delivery tester

IEC TS 61496-5:2023 机械安全电敏感防护设备第5部分:雷达防护装置的特殊要求

Safety of machinery – Electro-sensitive protective equipment - Part 5: Particular requirements for radar-based protective devices

T/GXAS 559-2023 10 kV交流试送仪技术条件

本文件界定了10 kV交流试送仪涉及的术语和定义，规定了交流试送仪的型号编制规则、技术要求、标志、包装、运输、贮存的要求，描述了相应的试验方法、检验规则。 本文件适用于使用微差双向补偿耐压技术的10 kV架空线路及混合线路交流试送仪生产、检验。

Technical condition for 10 kV alternating current trial delivery tester

IEC TS 61496-4-3:2022 RLV 机械安全.电敏感防护设备.第4-3部分:使用基于视觉的防护装置（VBPD）的设备的特殊要求.使用立体视觉技术（VBPDST）的附加要求

Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo

IEC TS 61496-4-3:2022 机械安全.电敏感防护设备.第4-3部分:使用基于视觉的防护装置（VBPD）的设备的特殊要求.使用立体视觉技术（VBPDST）的附加要求

Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo

IEC TS 61496-4-2:2022 RLV 机械安全.电敏感保护设备.第4-2部分:使用视觉保护装置（VBPD）的设备的特殊要求.使用参考图形技术（VBPDPP）时的附加要求

Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using referen

IEC TS 61496-4-2:2022 机械安全.电敏感保护设备.第4-2部分:使用视觉保护装置（VBPD）的设备的特殊要求.使用参考图形技术（VBPDPP）时的附加要求

Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using referen

IEC 62819:2022 带电作业.防电弧影响的眼睛、面部和头部保护器.性能要求和试验方法

Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods

KS C IEC 61243-5-2022 带电作业 电压检测器 第5部分：电压检测系统(VDS)

Live working－Voltage detectors－Part 5：Voltage detecting systems(VDS)

22/30422212 DC BS EN 50617-1 铁路应用 用于跨欧洲铁路系统互操作性的列车检测系统的技术参数 第 1 部分：轨道电路

BS EN 50617-1. Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1. Track circuits

T/SHMHZQ 011-2021 海洋工程防爆电气安装的技术咨询服务规范

1 范围  2 术语和定义  2.1 咨询服务  2.2 顾客  2.3 技术实现  3 基本要求  3.1 服务机构  3.2 专业人员要求  3.3 服务能力  3.4 质量保障能力  4 服务内容  5 服务流程 5.1 业务洽谈  5.2 现状诊断 5.3 方案设计  5.4 实施指导 5.5 项目评估  5.6 项目总结  6 技术实现  6.1 需求评估  6.2 技术实现策划  6.3 技术实现途径  7 服务质量持续改进  7.1 策划  7.2 过程监测  7.3 实施  7.4 效果评估 

Specification for technical advisory service for Marine engineering explosion-proof electrical installation

IEC 61318:2021 实时工作 - 符合性评估适用于工具 设备和设备

Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment

T/CEC 521-2021 输电线路杆塔攀爬助力装置

本文件规定了输电线路杆塔攀爬助力装置（以下简称“助爬装置”）的技术要求，试验方法，检验规则，标识、包装、运输和储存等规范性要求。 本文件适用于可沿安装在输电杆塔上的竖向刚性导轨运动、辅助线路检修作业人员登塔作业的自备动力源的助爬装置。

Power transmission line tower climbing assist device

IEC 61243-1:2021 实时工作 - 电压检测器 - 第1部分:电容型用于超过1 Kv的电压

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV AC

IEC 61472-2:2021 带电作业最小接近距离第2部分:1.0kV至72.5kV交流系统电气元件距离的测定方法

Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

IEC 61496-2:2020 机械安全 - 电敏保护装置 - 第2部分:使用有源光电保护装置的设备的特殊要求（Aopds）

Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

IEC 61496-1:2020 机械安全 - 电敏保护设备第1部分:一般要求和测试

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

T/CADBM 15-2019 吊顶用浴室电加热器

本标准规定了吊顶用浴室电加热器的术语和定义，分类、代号和标记，要求，试验方法，检验规则，标志、包装、运输和贮存。

Ceiling electric bathroom heater

T/CEEIA 317-2018 海洋工程防爆电器设备技术要求

本规范规定了海洋工程用防爆操作柱、防爆配电箱、防爆断路器、防爆按钮、防爆控制箱、防爆开关、接线箱等防爆电器设备的材质要求、结构要求、性能要求、检验规则、检验方法、标志、包装和贮存。    本规范适用于海洋工程移动式平台、固定式平台及船舶等场所，装设在可能产生或积聚的爆炸性环境中的防爆电器设备的设计、生产、制造和验收。    本规范适用于额定频率为50Hz或60Hz,导体间最高不超过1000V的交流系统，或在额定工作条件下最高瞬时电压不超过1500V的直流系统的低压防爆电器设备。

Technical Specification of Marine Engineering Explosion-proof Electrical Appliance Equipment

ASTM E2377-18 轻型电气设备遮蔽物的标准规范

1.1 This specification covers two types of lightweight electrical equipment shelters designed for transport on the M1152A1 and the M1152A1 with B2 Armor Kit High Mobility Multipurpose Wheeled Vehicle (HMMWV). These shelters are transported by rail, air, marine and highway when mounted or dismounted from their vehicles. 1.2 Classification—The shelters will be of the following types, as specified (see 6.2). 1.2.1 Type I—Shelter, Electrical Equipment, Lightweight (w/o Tunnel, 17-2-0035-1). 1.2.2 Type III—Shelter, Electrical Equipment, Lightweight, Modified, General Purpose (w/ Tunnel, 17-2-0035-3). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Shelter, Electrical Equipment, Lightweight