31.040.10 固定电阻器 标准查询与下载

KS C IEC 60115-9-2006(2016) 电子设备用固定电阻器第9部分:分规范带可单独测量电阻器的表面安装固定电阻器网络

Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors

KS C IEC 60115-9:2006 电子设备用固定电阻器.第9部分:分规范:各电阻器可单独测量的表面安装固定电阻网络

이 규격은 개별적인 측정이 가능한 저항기로 이루어진 전자기기용 표면실장 고정 네트워크저

Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors

KS C IEC 60115-9-1-2006(2011) 电子设备用固定电阻器第9－1部分:空白详细规范带可单独测量电阻器的表面贴装固定电阻器网络评定水平EZ

Fixed resistors for use in electronic equipment－Part 9－1：Blank detail specification－Fixed surface mount resistor networks with individually measurable resistors－Assessment level EZ

KS C IEC 60115-9-2006(2021) 电子设备用固定电阻器第9部分:分规范带可单独测量电阻器的表面安装固定电阻器网络

Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors

NF C83-231:2006 空白详细规范.小功率固定非线绕电阻器(评级 S)

Blank Detail Specification : fixed low power non-wire wound resistors (Assessment level S).

JIS C 5201-9:2006 电子设备用固定电阻器.第9部分:分规范:各电阻器可单独测量的表面安装固定电阻网络

この規格は。JIS C 5201-1を品目別通則とする品種別通則で，個別に抵抗値を測定できる表面実装用の固定ネットワーク抵抗器（以下,抵抗器という。）について規定する。

Fixed resistors for use in electronic equipment -- Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors

JIS C 5201-9-1:2006 电子设备用固定电阻器.第9-1部分:空白详细规范:各电阻器可单独测量的表面安装固定电阻网络.评定级别EZ

この規格は，JIS C 5201-9を品種別通則とするブランク個別規格で，個別に抵抗値を測定できる表面実装用の固定ネットワーク抵抗器(以下,抵抗器という。)の評価水準EZについて規定する。

Fixed resistors for use in electronic equipment -- Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors -- Assessment level EZ

NF C83-241-801/A1:2006 详细规范:低功率非线绕表面安装固定电阻器.矩形.稳定性级别 0,1, 0,25, 0,5, 1

Detail Specification : fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1, 0,25, 0,5, 1.

NF C93-266-1/A1:2006 电子设备用固定电阻器.第1部分:总规范

Fixed resistors for uses in electronic equipment - Part 1 : generic specification.

NF C93-266-1:2006 电子设备用固定电阻器.第1部分:总规范

Fixed resistors for uses in electronic equipment - Part 1 : generic specification.

BS EN 140402-801:2005 详细规范:固定低功率线绕表面安装(SMD)电阻器.矩形.稳定性等级0.5、1、2

Detail specification: Fixed low power wire-wound surface mount (SMD) resistors —Rectangular —Stability classes 0,5; 1; 2 1 Characteristics and ratings 1.1 Dimensions and Ratings 1.2 Derating curve 1.3 Resistance range and tolerance on rated resistance 1.4 Variation of resistance with temperature and temperature rise 1.5 Climatic categories 1.6 Limits for change of resistance at tests 1.7 Marking, packaging and ordering designation 1.7.1 Component 1.7.2 Package 1.7.3 Packaging/Taping 1.7.4 Ordering information 1.8 Additional information (not for inspection purpose) 1.8.1 Storage 1.8.2 Mounting 1.8.3 Soldering process 1.8.4 Conductive gluing 1.8.5 Use of cleaning solvents 1.8.6 Dissipation 2 Quality assessment procedures 2.1 General 2.1.1 Zero defect approach 2.1.2 100%-Test 2.1.3 Certificate of Conformity (CoC) 2.1.4 Certified test records 2.1.5 Failure rate level (only version E) 2.2 Qualification Approval 2.2.1 Version A 2.2.2 Version E 2.3 Quality conformance inspection 2.3.1 Qualification approval according to EN 100114-2 2.3.2 Technology approval according to EN 100114-6 2.3.3 Non-conforming items Annex A (normative) Fixed sample size Qualification Approval and Quality Conformance Inspection test schedule for fixed low power surface mounting (SMD) resistors Annex B (informative) Letter symbols and abbreviations Annex C (normative) Standards referred to in this specification Annex D (normative) Mounting of components

Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2

NF C83-240:2005 分规范:低功率表面安装的固定电阻器

Sectional specification : fixed low power surface mount (SMD) resistors.

NF C83-241-803/A1:2005 详细规范.低功率非线绕表面安装的固定电阻器.圆柱形.稳定性级别0.05、0.1、0.25、0.5、1和2

Detail specification : fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05, 0,1, 0,25, 0,5, 1, 2.

DIN EN 140402-801:2005 详细规范:固定低功率线绕表面安装(SMD)电阻器.矩形.稳定性等级0.5、1、2

This blank detail specification is a supplementary document of the Sectional Specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as beeing in accordance with CECC not shall they to be described.

Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2; German version EN 140402-801:2005

KS C IEC 61045-2-1-2005(2010) 电子设备用固定薄膜电阻网络第2部分:按能力批准程序评定质量的薄膜电阻网络空白详细规范 评估等级E

Fixed film resistor networks for use in electronic equipment－Part 2：Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessm

NF C83-241-803:2005 详细规范:低功率非线绕表面安装的固定电阻器.圆柱形.0.05、0.1、0.25、0.5、1和2级别的稳定性

Detail specification : fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05 - 0,1 - 0,25 - 0,5 - 1 - 2.

NF C83-241-804:2005 详细规范:固定式低功率绕组线表面安装电阻器.矩形.稳定性等级0.1, 0.25

Detail specification : fixed low power non wire-wound high stability surface mount (SMD) resistors - Rectangular - Stability classes 0,1, 0,25.

NF C82-242-801:2005 详细规范:固定式低功率绕组线表面安装电阻器.矩形.稳定性等级0.5, 1, 2

Detail specification : fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5, 1, 2.

DS/EN 140402-801:2005 详细规范：固定低功率线绕表面贴装（SMD）电阻器 矩形 稳定性等级 0,5； 1; 2个

This specification is part of 4 documents describing fixed resistors for surface mount technology as follows: EN 60115-1 Fixed resistors for use in electronic equipment . Part 1: Generic specification (IEC 60115-1, mod.) EN 140400 Sectional specification: Fixed low power surface mount (SMD) resistors EN 140402 Blank Detail Specification: Fixed low power wire wound surface mounting (SMD) resistors EN 140402-801 Detail specification: Fixed low power wire-wound surface mount (SMD) resistors . Rectangular .- Stability classes 0,5; 1; 2.

Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2

LST EN 140402-801-2005 详细规范：固定低功率线绕表面贴装（SMD）电阻器 矩形的 稳定性等级 0,5； 1; 2个

Detail specification: Fixed low power wire wound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2