31.040.10 固定电阻器 标准查询与下载

LST EN 60115-1-2011 电子设备用固定电阻器 第1部分：通用规范（IEC 60115-1:2008，已修改）

Fixed resistors for use in electronic equipment -- Part 1: Generic specification (IEC 60115-1:2008, modified)

NF C83-241-804*NF EN 140401-804:2011 详细规范:低功率表面安装设备(SMD)的固定薄膜电阻器.矩形.稳定性级别0.1-0.25

Detail Specification : fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1-0,25.

EN 60115-1:2011 电子设备用固定电阻器 第1部分：通用规范

IEC 60115-1: 2008(E) is a generic specification and is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. This fourth edition cancels and replaces the third edition issued in 1999 and Amendment 1 (2001). It constitutes a technical revision. It contains the following significant technical changes with respect to the previous edition: a) implementation of Annex Q which replaces Clause 3; b) addition of new tests procedures in 4.34 through 4.38; c) removal of the property 'temperature characteristics' from 4.8; d) introduction of a new system of test severities for the shear test in 4.32; e) introduction of new bias voltages for the damp heat steady-state test in 4.24; f) furthermore, this fourth edition cancels and replaces the third edition published in 1999 and constitutes minor revisions related to tables, figures and references.

Fixed resistors for use in electronic equipment - Part 1: Generic specification

DS/EN 140401-804:2011 详细规范：固定低功率薄膜高稳定性 SMD 电阻器 矩形 稳定性等级 0,1； 0,25

This European Standard was prepared by Technical Committee CENELEC TC 40XB, Resistors.The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 140401-804 on 2011-05-09.This document supersedes EN 140401-804:2005.

Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25

BS EN 140401-804:2011 详细规范.固定低功率膜SMD电阻器.矩形.稳定性等级0.1;0.25

Detail Specification. Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25

Detail Specification. Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25

BS EN 140401-804:2011+A1:2013 详细规范.固定低功率膜SMD电阻器.矩形.稳定性等级0.1;0.25

Detail Specification: Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25

DIN EN 140401-802:2011 详细规范:低功率表面安装设备(SMD)的固定薄膜电阻器.矩形.稳定性级别1和2.德文版本EN 140401-802-2007 + A1-2010

Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2; German version EN 140401-802:2007 + A1:2010

DIN EN 140401-803:2011 详细规范:低功率表面安装设备(SMD)的固定薄膜电阻器.圆柱形.稳定等级为0.05、0.1、0.25、0.5、1和2.德文版本EN 140401-803-2007 + A1-2010

Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2; German version EN 140401-803:2007 + A1:2010

LST EN 140401-803-2008/A1-2011 详细规范：固定低功率薄膜 SMD 电阻器 圆柱形 稳定性等级 0,05； 0,1; 0,25; 0,5; 1; 2个

Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2

LST EN 140401-802-2008/A1-2011 详细规范：固定低功率薄膜 SMD 电阻器 矩形 稳定性等级 1； 2个

Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2

JIS C 5201-1:2011 电子设备用固定电阻器.第1部分:总规范

This Standard is a generic specification and is applicable to fixed resistors for use in electronic equipment (hereafter referred to as "resistors"). This Standard establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed resistors for use in electronic equipment -- Part 1: Generic specification

SNI IEC 60115-1:2011 电子设备用固定电阻器 第1部分：通用规范

Fixed resistors for use in electronic equipment - Part 1: Generic specification

DS/EN 140401-803/A1:2010 详细规范：固定低功率薄膜 SMD 电阻器 圆柱形 稳定性等级 0,05； 0,1; 0,25; 0,5; 1; 2个

Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2

DS/EN 140401-802/A1:2010 详细规范：固定低功率薄膜 SMD 电阻器 矩形 稳定性等级 1； 2个

Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2

TIS 1523-2009 电子设备用固定电阻器.第1部分:总规范

Fixed resistors for use in electronic equipment.part 1: generic specification

TIS 1537-2009 直流输出的低压供电装置.性能特征

Low-voltage power supply devices, d.c. output-performance characteristics

DIN EN 140101-806 Berichtigung 1:2010 详细规范:低功率薄膜固定电阻器.高级陶瓷上保护涂覆或模塑、轴向或预制导线的金属薄膜电阻器.德文版本EN 140101-806-2008,勘误表DIN EN 140101-806-2008.德文版本CENELEC-Cor.-2009 EN 140101-806-2008

This corrigendum corrected table 6 - Climatic categories.

Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads; German version EN 140101-806:2008, Corrigendum to DIN EN 140101-806:2008-08; German version CENELEC-Co

DIN EN 140401:2009 空白详细规范:表面安装固定低功率膜(SMD)电阻器,德文版本 EN 140401:2009

Blank Detail Specification: Fixed low power film surface mount (SMD) resistors; German version EN 140401:2009

LST EN 140101-806-2008/AC-2009 详细规范：固定低功率薄膜电阻器 高级陶瓷、保形涂层或模制、轴向或预成型引线上的金属膜电阻器

Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads

LST EN 140401-2009 空白详细规范：固定低功率薄膜表面贴装（SMD）电阻器

Blank Detail Specification: Fixed low power film surface mount (SMD) resistors