31.060.01 电容器综合 标准查询与下载

KS C 6491-2004(2020) 可变电容器用于电子设备的一般规则

General rules of variable capacitors for electronics equipment

KS C 6490-2004(2020) 电子设备可变调谐电容器（A型）的一般规则

General rules of variable tuning capacitors(type A) for electronic equipment

KS C 6403-2004(2020) 电子设备用固定电容器通则

General rules of fixed capacitors for use in electronic equipment

KS C 6492-2004(2020) 可变电容器用于电子设备的测试方法

Test methods of variable capacitors for electronic equipment

IEC 62211:2003 电感元件.可靠性管理

Sets up a broad basis of electric and mechanical criteria of failure test procedures. Is applicable to inductive components (chokes and transformers) based on magnetically soft materials. Covers also discrete type components and the different types of su

Inductive components - Reliability management

KS C 6305-2002 电子设备用预置陶瓷电容器（C 型）

PRESET CERAMIC CAPACITORS (TYPE C) FOR ELECTRONIC EQUIPMENT

KS C 6493-2002 用于无线电接收器的 A 型可变调谐电容器（塑料薄膜电介质）

VARIABLE TUNING CAPACITORS TYPE A (PLASTIC FILM DIELECTRIC) FOR USE IN RADIO RECEIVER

AS/NZS 61049:2002 灯用附件．管式荧光灯以及其他放电灯电路中用电容器．性能要求

Specifies performance requirements for capacitors up to 2.5 kVAR rated up to 1000 V a.c. intended for use in discharge lamp circuits at 50/60 Hz. This Standard is identical with and reproduced from IEC 61049.

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements

AS/NZS 61048:2002 灯的附件 管状荧光灯用电容器和其他放电灯电路 一般安全性要求

Specifies the general and safety requirement for capacitors up to 2.5 kVAR having a rated voltage up to 1000 V intended for discharge lamp circuits operating at 50/60 Hz. This Standard is reproduced from IEC 61048 and varied for Australian/New Zealand conditions.

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General safety requirements

CECC 32 101-805-2001 详细规范:等级2副等级2C1和2R1气候范围55/125/56评估水平EZ固定多层陶瓷装置表面电容器

Detail Specification: Fixed Multilayer Ceramic Surface Mounting Capacitors, Class 2, Sub-Classes 2C1 and 2R1, Climatic Category 55/125/56, Assessment Level EZ, with Failure Rate Levels

Detail Specification: Fixed Multilayer Ceramic Surface Mounting Capacitors, Class 2, Sub-Classes 2C1 and 2R1, Climatic Category 55/125/56, Assessment Level EZ, with Failure Rate Levels

CECC 32 101-804-2001 详细规范:等级1副等级1B类型CG气候范围55/125/56评估水平EZ固定多层陶瓷装置表面电容器

Detail Specification: Fixed Multilayer Ceramic Surface Mounting Capacitors, Class 1, Sub-Class 1B, Type CG, Climatic Category 55/125/56, Assessment Level EZ, with Failure Rate Levels

Detail Specification: Fixed Multilayer Ceramic Surface Mounting Capacitors, Class 1, Sub-Class 1B, Type CG, Climatic Category 55/125/56, Assessment Level EZ, with Failure Rate Levels

DS/EN 133100:1999 分规范：用于抑制电磁干扰的无源滤波器单元 不需要安全测试的滤波器

This specification applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification, EN 133000. The scope of this specification is restricted to passive filter units for which safety tests are not appropriate. This implies that filters specified according to this specification will not be connected to mains supplies that such tests are required.

Sectional Specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required

IEC 61048:1999 电灯附件.管型荧光灯和其它放电电路电容器.一般和安全要求

This International Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kvar, and not less than 0,1 uF, having a rated voltage not exceeding 1 000 V, which are intended for use in discharge lamp circuits operating at 50 Hz or 60 Hz and at altitudes up to 3 000 m. It covers capacitors intended for connection in shunt or in series with the lamp circuit or an effective combination of these. It covers only impregnated or unimpregnated capacitors, having a dielectric of paper, plastic film or a combination of both, either metallized or with metal foil electrodes. This standard does not cover radio-interference suppressor capacitors the requirements for which are found in IEC 60384-14. Tests given in this standard are type tests. Requirements for testing individual capacitors during production are not included. note: * These lamps and associated ballasts are covered in the specifications of the following IEC standards; 60081:1984, Tubular fluorescent lamps for general lighting service Amendments No. 1 (1987) and No. 2 (1988) 60188:1974, High-pressure mercury vapour lamps Amendments No. 1 (1976), No. 2 (1979), No. 3 (1984) and No. 4 (1988) 60192:1973, Low pressure sodium vapour lamps Amendment No. 2 (1988) 60920:1990, Ballasts for tubular fluorescent lamps. General and safety requirements 60922:1989, Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

IEC 61048/AMD2:1999 灯附件 管形荧光灯和其他放电灯电路用电容器 一般要求和安全要求 修改2

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements; Amendment 2

ANSI/UL 810-1998 电容器安全标准

Applies to enclosed capacitors with integral protection intended to reduce the risk of rupture and venting of the capacitor enclosure under internal fault conditions. These requirements apply to oil-filled capacitors rated 5 kilovolts or less, and dry-type capacitors rated 2 kilovolts or less, that are intended for use with appliances, lighting equipment, air conditioning and refrigeration equipment, motors, and the like, and that comply with the requirements for such appliances and equipment. The requirements in Part II of this standard apply to general-use power-factor-correction units rated 600 volts maximum, intended for power-factor correction of circuits in accordance with the American National Standard National Electrical Code, ANSI/NFPA 70.

Standard for Safety for Capacitors

SJ 20602-1996 电容器用双向拉伸聚丙烯薄膜规范

Specification for biaxially oriented polypropylene film for capacitors capacitors

IEC 61048/AMD1:1995 灯附件 管形荧光灯和其他放电灯电路用电容器 一般要求和安全要求 修改1

Contains amendments and supplements of clauses 4 to 17.

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements; Amendment 1

CECC 30 801-805 ISSUE 1-1995 多孔渗水阳极低倍率固态电解液固定钽装置表面电容器(En)

Fixed Tantalum Surface Mounting Capacitors with Solid Electrolyte, Porous Anode; Low ESR Range En

Fixed Tantalum Surface Mounting Capacitors with Solid Electrolyte, Porous Anode; Low ESR Range En

JIS C 4908:1995 电气设备用电容器

この規格は，主として電気機器に組み込んで使用するコンデンサ(1)のうち，商用周波数における定格電圧が単相交流1000V以下のもので.次に示すものについて規定する。

Capacitors for electrical apparatus

GOST IEC 1048-1995 用于管状荧光灯和其他放电灯电路的电容器 一般和安全要求

Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements