31.060.10 固定电容器 标准查询与下载

GB/T 6346.1-2024 电子设备用固定电容器 第1部分：总规范

Fixed capacitors for electronic equipment Part 1: General specifications

GB/T 21038-2007 电子设备用固定电容器 第21-1部分:空白详细规范 表面安装用1类多层瓷介固定电容器 评定水平 EZ

空白详细规范是分规范的一种补充性文件，并包括详细规范的格式、编排和最少内容的要求。不遵守这些要求的详细规范，认为不是符合电子元件质量评定体系要求的标准。

Fixed capacitors for use in electronic equipment Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 1 Assessment level EZ

GB/T 21040-2007 电子设备用固定电容器 第22-1部分:空白详细规范 表面安装用2类多层瓷介固定电容器 评定水平 EZ

空白详细规范是分规范的一种补充性文件，并包括详细规范的格式、编排和最少内容的要求。不遵守这些要求的详细规范，认为不是符合电子元件质量评定体系要求的标准。

Fixed capacitors for in electronic equipment- Part 22-1: Blank detail specification: Fixed surface mount multiplayer capacitors of ceramic dielectric, class 2 Assessment level EZ

GB/T 21042-2007 电子设备用固定电容器 第22部分:分规范 表面安装用2类多层瓷介固定电容器

本标准适用于电子设备中表面安装用无包封2类多层瓷介固定电容器，这些电容器有金属连接片或焊接带，并主要用于印制电路板或在混合电路上直接安装。 抑制电磁干扰电容器不包括在本分规范，包括在GB／T l4472-1998。

Fixed capacitors for use in electronic equipment Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 2

GB/T 21041-2007 电子设备用固定电容器 第21部分:分规范 表面安装用1类多层瓷介固定电容器

本标准适用于电子设备中表面安装用无包封1类多层瓷介固定电容器，这些电容器有金属连接片或焊接带，并主要用于印制电路板或在混合电路上直接安装。 抑制电磁干扰电容器不包括在本分规范，包括在国家标准GB／T l4472-1998。

Fixed capacitors for use in electronic equipment Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 1

GB/T 2693-2001 电子设备用固定电容器 第1部分;总规范

本标准规定了电子设备用的固定电容器。 本标准规定了适用于质量评定电子元器件的分规范和详细规范中使用的标准术语、检验程序和试验方法，本标准也可用于任何其他用途的分规范和详细规范。

Fixed capacitors for use in electronic equipment Part 1: Generic specitigation

GB/T 15448-1995 电子设备用固定电容器 第19部分:分规范:金属化聚乙烯对苯二甲酸酯膜介质直流片式固定电容器

本标准适用于电子设备用金属化电极聚乙烯对苯二甲酸酯（简称聚酯）介质直流片式固定电容器。 这类电容器有金属化连接片或焊片并直接安装在混合电路的基片上或印制电路板上。这类电容器可能具有与使用条件有关的自愈性能，它们主要用于交流分量相对额定电压是比较小的场合。 本标准不包括抑制无线电干扰用固定电容器，抑制无线电干扰的电容器包括在IEC384-14标准中。

Fixed capacitors for use in electronic equipment Part 19:Sectional specification: Fixed metallized polyethyleneterephthalate film dielectric chip D.C.capacitors

23/30477801 DC BS EN IEC 62391-2 电子设备用固定双电层电容器 第2部分：截面规范 电力用双电层电容器

BS EN IEC 62391-2. Fixed electric double-layer capacitors for use in electronic equipment - Part 2. Sectional specification. Electric double layer capacitors for power application

23/30453858 DC BS EN IEC 60384-21 电子设备用固定电容器 第 21 部分 分规范 陶瓷电介质固定表面贴装多层电容器 1 级

BS EN IEC 60384-21. Fixed capacitors for use in electronic equipment - Part 21. Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1

23/30453862 DC BS EN IEC 60384-22 电子设备用固定电容器 第 22 部分：分规范 陶瓷介质固定表面贴装多层电容器 2 级

BS EN IEC 60384-22. Fixed capacitors for use in electronic equipment - Part 22. Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

BS EN IEC 60384-23:2023 电子设备用固定电容器 分规范 固定金属化聚萘二甲酸乙二醇酯薄膜电介质表面贴装直流电容器

1   Scope This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics, selects from IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring methods and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level. Lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384‑14.

Fixed capacitors for use in electronic equipment - Sectional specification. Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

BS EN IEC 60384-20:2023 电子设备用固定电容器 分规范 固定金属化聚苯硫醚薄膜电介质表面贴装直流电容器

1   Scope This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics and selects from IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring methods, and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level; lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384‑14.

Fixed capacitors for use in electronic equipment - Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors

BS EN IEC 60384-14:2023 电子设备用固定电容器 分规范 用于抑制电磁干扰和连接电源的固定电容器

This part of IEC 60384 applies to capacitors and resistor-capacitor combinations intended to be connected to AC mains or other supply with a nominal voltage not exceeding 1 000 V AC (RMS), and with a nominal frequency not exceeding 100 Hz. This document includes also additional specific conditions and requirements for the connection to DC supplies with a rated voltage not exceeding 1 500 V DC. The principal object of this part of IEC 60384 is to prescribe preferred ratings and characteristics and to select, from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification are of equal or higher performance level; lower performance levels are not permitted. This document also provides a schedule of safety tests to be used by national testing stations in countries where approval by such stations is required. The overvoltage categories in combination with the AC mains voltages for the capacitors classified in this document are to be taken from IEC 60664-1.

Fixed capacitors for use in electronic equipment - Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

EN IEC 60384-23:2023 电子设备用固定电容器 第23部分：分规范 固定金属化聚萘二甲酸乙二醇酯薄膜介电表面贴装直流电容器

IEC 60384-23:2023 is available as IEC 60384-23:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60384-23:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics, selects from IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring methods and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level. Lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition: - this edition includes the following significant technical changes with respect to the previous edition: revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents; - the document structure has been organized to follow new sectional specification structure decided in TC 40; - revised tables and Clause 5 so as to prevent duplications and contradictions; - in Subclause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added; - in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added; - in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1; - in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added; - tangent of loss angle measurement has been added to the resistance to soldering heat test; - lot-by-lot and periodical inspection tables including requirements have been moved to Annex A; - revised Inspection Level (IL) of A1 subgroup.

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

EN IEC 60384-20:2023 电子设备用固定电容器 第20部分：分规范 固定金属化聚苯硫醚薄膜介电表面贴装直流电容器

IEC 60384-20:2023 is available as IEC 60384-20:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60384-20:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics and selects from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods, and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level; lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition: - revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents; - the document structure has been organized to follow new sectional specification structure decided in TC 40; - revised tables and Clause 5 so as to prevent duplications and contradictions; - in Clause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added; - in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added; - in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1; - in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added; - tangent of loss angle measurement has been added to resistance to soldering heat test; - lot-by-lot and periodical inspection tables, including requirements, have been moved to Annex A; - revised Inspection Level (IL) of A1 subgroup.

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors

KS C IEC 60384-14-2023 电子设备用固定电容器第14部分:分规范电磁干扰抑制和电源连接用固定电容

Fixed capacitors for use in electronic equipment Part 14: Sectional specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

EN IEC 60384-14:2023 电子设备用固定电容器 第14部分：分规范 用于抑制电磁干扰和连接电源的固定电容器

IEC 60384-14:2023 applies to capacitors and resistor-capacitor combinations intended to be connected to AC mains or other supply with a nominal voltage not exceeding 1 000 V AC (RMS), and with a nominal frequency not exceeding 100 Hz. This document includes also additional specific conditions and requirements for the connection to DC supplies with a rated voltage not exceeding 1 500 V DC. The principal object of this part of IEC 60384 is to prescribe preferred ratings and characteristics and to select, from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification are of equal or higher performance level; lower performance levels are not permitted. This document also provides a schedule of safety tests to be used by national testing stations in countries where approval by such stations is required. The overvoltage categories in combination with the AC mains voltages for the capacitors classified in this document are to be taken from IEC 60664-1. This edition includes the following significant technical changes with respect to the previous edition: in damp heat steady state test, all capacitor types are tested both with and without rated voltage; the number of test pieces has been increased; tangent of loss angle is added In Group 0 tests, in safety tests only; qualification approval based on safety and performance tests has been removed from the main text to a normative annex; the range of rated voltages is given instead of exact rated voltage values; normative annex for description of capacitor styles and of creepage/clearance distance measurement has been added; the importance of mechanical failures (cracks) in component encapsulation as a safety feature is highlighted in handling instructions and requirements after all relevant tests.

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-23:2023 电子设备用固定电容器.第23部分:分规范.固定金属化聚萘二甲酸乙二醇酯膜电介质表面安装直流电容器

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

IEC 60384-23:2023 RLV 电子设备用固定电容器.第23部分:分规范.固定金属化聚萘二甲酸乙二醇酯膜电介质表面安装直流电容器

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

IEC 60384-20:2023 RLV 电子设备用固定电容器.第20部分:分规范.金属化聚苯硫醚膜电介质表面安装直流固定电容器

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors