31.060.30 纸介电容器和塑料膜电容器 标准查询与下载

KS C IEC 60384-13-2018 用于电子设备的固定电容器 - 第13部分:分段规格 - 固定聚丙烯薄膜电介质金属箔直流电容器

Fixed capacitors for use in electronic equipment — Part 13: Sectional specification — Fixed polypropylene film dielectric metal foil d.c. capacitors

BS EN 60384-3:2016 用于电子设备的固定电容器 剖面规范 采用固体(MnO₂)电解质的表面贴装固定钽电解电容器

Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with solid (MnO₂) electrolyte

EN 60384-3:2016 电子设备用固定电容器.第3部分:分规范采用二氧化锰固体电解质的表面安装固定的钽电解电容器

IEC 60384-3:2006 applies to surface mount tantalum solid electrolyte capacitors. These capacitors are primarily intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. The following two styles are considered: Style 1 - protected capacitors; Style 2 - unprotected capacitors. This third edition cancels and replaces the second edition published in 1989 and constitutes a minor revision related to tables, figures and references This bilingual version, published in 2008-06, corresponds to the English version.

Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte

DIN EN 60384-19:2016 电子设备用固定电容器.第19部分:固定金属化聚乙烯.对苯二酸酯膜介质表面黏着式直流电容器（IEC 60384-19-2015）.德文版本EN 60384-19-2015

Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2015); German version EN 60384-19:2015

DIN EN 60384-20:2016 电子设备用固定电容器.第20部分:分规范.固定式金属化聚苯硫薄膜电介质表面安装直流电容器(IEC 60384-20-2015).德文版本EN 60384-20-2015

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors (IEC 60384-20:2015); German version EN 60384-20:2015

DIN EN 60384-23:2016 电子设备用固定电容器.第23部分:分规范.表面安装的金属化聚乙烯苯二甲酸盐膜介质直流固定电容器(IEC 60384-23-2015);德文版本EN 60384-23-2015

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (IEC 60384-23:2015); German version EN 60384-23:2015

BS EN 60384-19:2015 电子设备用固定电容器.分规范.金属化聚对苯二甲酸乙二醇酯膜电介质表面安装直流固定电容器

Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors

KS C IEC 60384-7-2015 电子设备用固定电容器 第7部分：分规范：固定式聚苯乙烯薄膜电介质金属箔直流电容器

Fixed capacitors for use in electronic equipment－Part 7：Sectional specification：Fixed polystyrene film dielectric metal foil d.c. capacitors

KS C IEC 60384-7:2015 电子设备用固定电容器 第7部分：分规范 金属箔式聚苯乙烯膜介质直流固定电容器

Fixed capacitors for use in electronic equipment－Part 7：Sectional specification：Fixed polystyrene film dielectric metal foil d.c. capacitors

KS C 6384-12-2015 电子设备用固定电容器 第12部分：品种标准：直流用聚碳酸酯薄膜电容器

Fixed capacitors for use in electronic equipment－Part 12：Sectional specification：Fixed polycarbonate film dielectric metal foil d.c. capacitors

KS C 6384-6-2015 电子设备用固定电容器 第6部分：品种标准：直流用金属化聚碳酸酯薄膜介质电容器

Fixed capacitors for use in electronic equipment－Part 6：Sectional specification：Fixed metallized polycarbonate film dielectric d.c. capacitors

EN 60384-19:2015 电子设备用固定电容器 第19部分：分规范：固定金属化聚对苯二甲酸乙二醇酯薄膜介电表面贴装直流电容器

IEC 60384-19:2015 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384 14. This edition includes the following significant technical changes with respect to the previous edition: a) Revised all parts of the document based on the IEC Directives Part 2:2011 (sixth edition) to the extent practicable, and harmonization between other similar kind of documents. b) Revised tables and Clause 4 so as to prevent duplications and contradictions.

Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors

GSO IEC 60384-11-1:2014 电子设备用固定电容器 第11-1部分：不完整的详细规范 带 PTFE 介电箔的固定直流操作电容器 额定等级 E

It is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. It constitutes a minor revision related to tables, figures and references.

Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ

GSO IEC 60384-3-1:2014 电子设备用固定电容电容器 第3-1部分：准备细节规范 恒电容钽、二氧化锰固体电解质表面贴装电解电容器 EZ等级

IEC 60384-3-1:2006 is a bilingual version and corresponds to the English version. It is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. It cancels and replaces the first edition published in 1989 and constitutes a minor revision related to tables, figures and references.

Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ

GSO IEC 60252-1:2014 交流电动机电容器 第1部分：概述 性能、测试和调节 安全要求 安装和操作说明

IEC 60252-1:2010+A1:2013 applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system. This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V. This edition includes the following significant technical changes with respect to the previous edition: - the definition of "segmented capacitors" has been added in 3.6; - the definition of "classes of operation" has been clarified, with the addition of the concept of "probable life" with reference to statistics, in 3.9; - the following wording "Operation above the rated voltage will reduce the life expectancy of the capacitor" has been introduced in 6.1. - some clarifications have been added to Clause 8, Marking, mainly for small capacitors. This consolidated version consists of the second edition (2010) and its amendment 1 (2013). Therefore, no need to order amendment in addition to this publication.

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

GSO IEC 60384-13-1:2014 电子设备中使用的固定电容器 第13-1部分：不完整的详细规范 带聚乙烯介电箔的直流操作固定电容器 EZ 等级

IEC 60384-13-1:2006(E) is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. The contents of the corrigendum of March 2009 have been included in this copy.

Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ

GSO IEC 60384-2:2014 电子设备用固定电容器 第2部分：子规范 由聚对苯二甲酸乙二醇酯金属介电薄膜制造的直流固定电容器

This part of IEC 60384 applies to fixed capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors may have “self-healing properties” depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference suppression and surface mount fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors are not included, but are covered by IEC 60384-14 and IEC 60384-19 respectively.

Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors

GSO IEC 60384-2-1:2014 电子设备中使用的固定电容器 第2-1部分：详细的正式规格 由聚对苯二甲酸乙二醇酯金属绝缘带制造的直流固定电容器 评级等级 E 和 EZ

blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of details specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described.

Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ

GSO IEC 60384-19-1:2014 用于电子设备的固定电容器 部件号 (19-1)：详细的正式规格 由聚对苯二甲酸乙二醇酯金属绝缘带制造的表面安装恒流电容器 EZ评级等级

is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ

GSO IEC 60384-16-1:2014 电子设备用固定电容器 第16-1部分：不完整的详细规范 聚丙烯介电箔直流固定电容器 额定等级 EZ 和 E

blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of details specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described.

Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ