31.060.30 纸介电容器和塑料膜电容器 标准查询与下载
共找到 445 条与 纸介电容器和塑料膜电容器 相关的标准，共 30 页
This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted direct onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384-14.
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
IEC 60384-3-1:2006 is a bilingual version and corresponds to the English version. It is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. It cancels and replaces the first edition published in 1989 and constitutes a minor revision related to tables, figures and references.
Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
This part of IEC 60384 applies to fixed capacitors with metalized electrodes and polypropylene dielectric for use in electronic equipment NOTE Capacitors which have mixed foil and metalized electrodes are also within the scope of this standard These capacitors may have "self-healing" properties depending on conditions of use Capacitors covered by this specification are mainly intended for use with alternating voltage and/or for pulse applications. The maximum reactive power applicable is 10 000 var and the maximum peak voltage is 3 000 V. Capacitors for reactive power exceeding 500 var and to which a maximum peak voltage of 2 500 V at 50 Hz can be applied are not covered by this standard, except when they are the highest part of a range of reactive power mainly situated below 500 var at 50 Hz. This standard is not intended to cover capacitance values higher than 20 µF. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. Capacitors for electrical shock hazard protection (covered by IEC 60065) and fluorescent lamp and motor capacitors (covered by IEC technical committee 33, and IEC technical committee 34) are also excluded.
Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
It is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. It constitutes a minor revision related to tables, figures and references.
Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of details specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described.
Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
IEC 60252-1:2010+A1:2013 applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system. This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V. This edition includes the following significant technical changes with respect to the previous edition: - the definition of "segmented capacitors" has been added in 3.6; - the definition of "classes of operation" has been clarified, with the addition of the concept of "probable life" with reference to statistics, in 3.9; - the following wording "Operation above the rated voltage will reduce the life expectancy of the capacitor" has been introduced in 6.1. - some clarifications have been added to Clause 8, Marking, mainly for small capacitors. This consolidated version consists of the second edition (2010) and its amendment 1 (2013). Therefore, no need to order amendment in addition to this publication.
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
This specification applies to surface mount tantalum solid electrolyte capacitors. These capacitors are primarily intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. The following two styles are considered: – Style 1: protected capacitors; – Style 2: unprotected capacitors.
Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
- ICS
- 31.060.30
- CCS
- 发布
- 2014-12-25
- 实施
Fixed capacitors for use in electronic equipment -- Part 11-1: Blank detail specification -- Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors -- Assessment level EZ
- ICS
- 31.060.30
- CCS
- L11
- 发布
- 2014-09-22
- 实施
Fixed capacitors for use in electronic equipment -- Part 11: Sectional specification -- Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
- ICS
- 31.060.30
- CCS
- L11
- 发布
- 2014-09-22
- 实施
Fixed capacitors for use in electronic equipment－Part 13：Blank detail specification：Fixed polypropylene film dielectric metal foil d.c. capacitors－Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 20131231
- 实施
- 20131231
Fixed capacitors for use in electronic equipment－Part 6：Blank detail specification：Fixed metallized polycarbonate film dielectric d.c. capacitors－Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 20131231
- 实施
- 20131231
Fixed capacitors for use in electronic equipment－Part 7：Blank detail specification for fixed polystyrene film dielectric metal foil d.c. capacitors－Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
Fixed capacitors for use in electronic equipment－Part 17：Blank detail specification：Fixed metallized polypropylene film dielectric a.c. and pulse capacitors. Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
Fixed capacitors for use in electronic equipment－Part 13：Blank detail specification：Fixed polypropylene film dielectric metal foil d.c. capacitors－Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
Fixed capacitors for use in electronic equipment-Part 2:Blank detail specification:Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors-Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
Fixed capacitors for use in electronic equipment－Part 19：Blank detail specification：Fixed metallizedpolyethylene-terephthalate film dielectric chip d.c. capacitors.Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
Fixed capacitors for use in electronic equipment－Part 6：Blank detail specification：Fixed metallized polycarbonate film dielectric d.c. capacitors－Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
Fixed capacitors for use in electronic equipment－Part 12：Blank detail specification：Fixed polycarbonatefilm dielectric metal foil d.c. capacitors. Assessment level E
- ICS
- 31.060.30
- CCS
- 发布
- 2013-12-31
- 实施
DIN EN 60384-2:2012 电子设备用固定电容器.第2部分:分规范.金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器(IEC 60384-2-2011).德文版本EN 60384-2-2012
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (IEC 60384-2:2011); German version EN 60384-2:2012
- ICS
- 31.060.30
- CCS
- L11
- 发布
- 2012-09
- 实施
- 2012-09-01
Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2011); German version EN 60384-13:2012
- ICS
- 31.060.30
- CCS
- L11
- 发布
- 2012-09
- 实施
- 2012-09-01
