31.060.30 纸介电容器和塑料膜电容器 标准查询与下载

JIS C 5101-16-1:2009 电子设备用固定电容器.第16-1部分:空白详细规范:金属化聚丙烯膜介质直流固定电容器.评定等级E和EZ

This Standard is a blank detail specification associated with the sectional specification JIS C 5101-16 and specifies fixed metallized polypropylene film dielectric d.c. capacitors (hereafter referred to as "capacitors") assessment levels E and EZ. NOTE : The International Standard corresponding to this Standard is as follows. IEC 60384-16-1: 2005 Fixed capacitors for use in electronic equipment— Part 16-1: Blank detail specification—Fixed metallized polypropylene film dielectric d.c. capacitors—Assessment levels E and EZ (IDT) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/ IEC Guide 21.

Fixed capacitors for use in electronic equipment -- Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors -- Assessment levels E and EZ

JIS C 5101-16:2009 电子设备用固定电容器.第16部分:分规范:金属化聚丙烯膜介质直流固定电容器

This Standard is a sectional specification associated with the generic specification JIS C 5101-1 and applies to fixed metallized polypropylene film dielectric d.c. capacitors for use in electronic equipment (hereafter referred to as "capacitors"). It covers fixed capacitors with metallized electrodes and polypropylene dielectric for use in electronic equipment. These capacitors may have "self-healing properties" depending on conditions of use. They are mainly intended for use with direct voltage. Capacitors for alternating voltage and pulse applications are not included, but are covered by JIS C 5101-17. The maximum power to be applied is 500 var at 50 Hz and the maximum peak voltage is 2 500 V. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference suppression are not included, but are covered by JIS C 5101-14. Capacitors for electrical shock hazard protection (covered by JIS C 6065) and fluorescent lamp and motor capacitors (covered by IEC technical committee 33, and IEC technical committee 34). NOTE 1 This Standard specifies characteristics of capacitors, but requirements related to the characteristics indicate the targeted values. It is not designed to be used for conducting the conformity assessment by itself. NOTE 2 The International Standard corresponding to this Standard is as follows. IEC 60384-16 : 2005 Fixed capacitors for use in electronic equipment— Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors (IDT) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors

JIS C 5101-2:2009 电子设备用固定电容器.第2部分:分规范:金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器

This Standard is a sectional specification associated with the generic specification JIS C 5101-1 and applies to fixed capacitors (hereafter referred to as "capacitors") for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference suppression and surface mount fixed met- allized polyethylene-terephthalate film dielectric d.c. capacitors are not included, but are covered by JIS C 5101-14 and IEC 60384-19, respectively. NOTE : The International Standard corresponding to this Standard is as follows. IEC 60384-2:2005 Fixed capacitors for use in electronic equipment-- Part 2: Sectional specification: Fixed metallized polyethylene-terephtha- late film dielectric d.c. capacitors (IDT) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/ IEC Guide 21.

Fixed capacitors for use in electronic equipment -- Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors

JIS C 5101-2-1:2009 电子设备用固定电容器.第2-1部分:空白详细规范:金属化聚乙烯对苯二甲酸酯薄膜介质直流固定电容器.评定等级E和EZ

This Standard is a blank detail specification associated with the generic specifica- tion, JIS C 5101-2 and specifies assessment levels E and EZ of fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors (hereafter referred to as "capacitors"). NOTE : The International Standard corresponding to this Standard is as follows. IEC 60384-2-1:2005 Fixed capacitors for use in electronic equipment-- Part 2-1: Blank detail specification: Fixed metallized polyethylene-tereph- thalate film dielectric d.c. capacitors--Assessment levels E and EZ (IDT) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Fixed capacitors for use in electronic equipment -- Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors -- Assessment levels E and EZ

KS C IEC 60384-61-2008 电子设备用固定电容器第6部分:空白详细规范:金属化聚碳酸酯薄膜介质直流固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 6：Blank detail specification：Fixed metallized polycarbonate film dielectric d.c. capacitors－Assessment level E

KS C IEC 60384-131-2008 电子设备用固定电容器第13部分:空白详细规范:聚丙烯薄膜介质金属箔直流固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 13：Blank detail specification：Fixed polypropylene film dielectric metal foil d.c. capacitors－Assessment level E

KS C IEC 60384-7-2008(2015) 电子设备用固定电容器第7部分:分规范:聚苯乙烯薄膜介质金属箔直流固定电容器

Fixed capacitors for use in electronic equipment－Part 7：Sectional specification：Fixed polystyrene film dielectric metal foil d.c. capacitors

KS C IEC 60384-7-1-2008 电子设备用固定电容器第7部分:聚苯乙烯薄膜介质金属箔直流固定电容器空白详细规范评定水平E

Fixed capacitors for use in electronic equipment－Part 7：Blank detail specification for fixed polystyrene film dielectric metal foil d.c. capacitors－Assessment level E

DIN EN 60384-19-1 Berichtigung 1:2008 电子设备用固定电容器.第19-1部分:空白详细规范.金属化聚对苯二甲酸乙二醇酯薄膜电介质表面安装直流固定电容器.评定等级EZ.技术勘误DIN EN 60384-19-1-2006-09

Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ (IEC 60384-19-1:2006); German version EN 60384-19-1:

DIN EN 60384-19 Berichtigung 1:2008 电子设备用固定电容器.第19部分:分规范.金属化聚对苯二甲酸乙二醇酯薄膜电介质表面安装直流固定电容器.技术勘误DIN EN 60384-19-2006-09

Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006); German version EN 60384-19:2006, Corrigendum to DIN EN 603

LST EN 60384-11-1-2008 电子设备用固定电容器 第 11-1 部分：空白详细规范 固定聚对苯二甲酸乙二醇酯薄膜介电金属箔直流电容器 评估等级 EZ（IEC 60384-11-1:2008）

Fixed capacitors for use in electronic equipment -- Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ (IEC 60384-11-1:2008)

LST EN 60384-11-2008 电子设备用固定电容器 第11部分：分规范 固定聚对苯二甲酸乙二醇酯薄膜介电金属箔直流电容器（IEC 60384-11:2008）

Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors (IEC 60384-11:2008)

DIN EN 60384-13 Berichtigung 1:2008 电子设备用固定电容器.第13部分:分规范.金属箔式聚丙烯介质直流固定电容器.技术勘误DIN EN 60384-13-2006

Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2006); German version EN 60384-13:2006 Corrigendum to DIN EN 60384-13:2006-09; German versio

DIN EN 60384-11-1:2008 电子设备用固定电容器.第11-1部分:空白详细规范.金属箔式聚乙烯-对苯二甲酸酯膜介质直流固定电容器.评定等级EZ

Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ (IEC 60384-11-1:2008); German version EN 60384-11-1:2008

DIN EN 60384-11:2008 电子设备用固定电容器.第11部分:分规范.金属箔式聚乙烯-对苯二甲酸酯膜介质直流固定电容器

Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors (IEC 60384-11:2008); German version EN 60384-11:2008

DIN EN 60384-20-1:2008 电子设备用固定电容器.第20-1部分:空白详细规范.固定式金属化聚苯硫薄膜电介质表面安装直流电容器.评定等级EZ

Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ (IEC 60384-20-1:2008 + Corrigendum 2008); German version

DIN EN 60384-13-1 Berichtigung 1:2008 电子设备用固定电容器.第13-1部分:空白详细规范.金属箔式聚丙烯介质直流固定电容器.技术勘误DIN EN 60384-13-2006

Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E (IEC 60384-13-1:2006); German version EN 60384-13-1:2006 Corrigendum to DIN EN 6

DIN EN 60384-20:2008 电子设备用固定电容器.第20部分:分规范.固定式金属化聚苯硫薄膜电介质表面安装直流电容器(IEC 60384-20-2008＋技术勘误2008)

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors (IEC 60384-20:2008 + Corrigendum 2008); German version EN 60384-20:2008

BS EN 60384-20-1:2008 电子设备用固定式电容器.空白详细规范.金属化聚苯撑硫薄膜电介质表面安装直流(d.c.)固定电容器.评定等级EZ

This British Standard is the UK implementation of EN 60384-20-1:2008. It is identical to IEC 60384-20-1:2008. It supersedes BS EN 60384-20-1:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Fixed capacitors for use in electronic equipment -Part 20-1: Blank detail specification - Fixed metalized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ

BS EN 60384-11-1:2008 电子设备用固定电容器 空白详细规范 聚对苯二甲酸乙二醇酯薄膜电介质金属箔直流固定电容器 评定等级EZ

1.1 Recommended method(s) of mounting (to be inserted) See IEC 60384-11, 1.4.2. 1.2 Dimensions Table 1 – Case size reference and dimensions 1.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Max. a.c. voltage (if applicable) Tangent of loss angle (tan δ) Insulation resistance Table 2 – Values of capacitance and of voltage related to case sizes

Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polyethylene- terephthalate film dielectric metal foil d.c. capacitors. Assessment level EZ