31.060.40 钽电解电容器 标准查询与下载
共找到 205 条与 钽电解电容器 相关的标准，共 14 页
GB/T6346的本部分适用于表面安装的导电聚合物固体电解质钽固定电容器(以下简称电容器)。 表面安装MnO2固体电解质钽固定电容器不包括在本部分内,但被IEC60384-3所覆盖。 这类电容器主要用于直接安装在混合电路基板上或印制电路板上。 特殊用途应用的电容器可能需要补充技术条件。
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2021-10-11
- 实施
- 2022-05-01 00:00:00.0
本部分适用于表面安装的固体电解质钽电容器。这类电容器主要用于直接安装在混合电路基板上或印刷电路板上。 包括两种类型：I型有防护层的电容器和II型无防护层的电容器。
Fixed capacitors for use in electronic equipment.Part 3:Sectional specification.Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2015-07-03
- 实施
- 2016-03-01
空白详细规范是分规范的一种补充性文件，它包括详细规范的格式、编排和最少内容要求。不遵守这些要求的详细规范，认为是不符合电子元件质量评定体系要求的标准。
Fixed capacitors for use in electronic equipment.Part 3-1: Blank detail specification.Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte.Assessment level EZ
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2015-07-03
- 实施
- 2016-03-01
本规范适用于电子设备用极性和双极性的固体和非固体电解质钽电容器。 本规范包括长寿命电容器和通用电容器。对于专用电容器可能需要增加附加要求。 本规范包括三个基本小类，即： 小类1：非固体电解质箔电极钽电容器。 1A：普通箔电极 1B：腐蚀箔电极 小类2：非固体电解质多孔阳极钽电容器。 小类3：固体电解质多孔阳极钽电容器。
Fixed capacitors for use in electronic equipment-Part 15:Sectional specification-Fixed tantalum capacitors with non-solid or solid electrolyte
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2003-11-24
- 实施
- 2004-08-01
空白详细规范是分规范的一种补充性文件，并包括详细规范的格式，编排和最少内容要求。不遵守这些要求的详细规范不能认为是符合IEC要求的标准，也不能称为IEC标准。
Fixed capacitors for use in electronic equipment-Part 15-3:Blank detail specification-Fixed tantalum capacitors with solid electrolyte and porous anode-Assessment level E
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2003-11-24
- 实施
- 2004-08-01
空白详细规范 空白详细规范是分规范的一种补充性文件，并包括详细规范的格式、编排和最低限度内容要求。不遵守这些要求的详细规范均不能认为是符合IEC规范，也不能称为IEC标准。 在制定详细规范时应考虑分规范的1.4条的内容，首页括号内数字标注的位置上应填写下列相应内容：详细规范的识别 （1）授权起草本详细规范的组织：IEC或国家标准机构。 （2）IEC或国家的详细规范编号、出版日期以及国家标准体系所要求的更多的内容。 （3）IEC总规范或国家总规范的编号和版本号 （4）IEC空白详细规范编号。电容器的识别 （5）电容器类型的简述。 （6）典型结构的说明（适用时）。 （7）标有对互换性有重要影响的主要尺寸的外形图和（或）引用国家或国际的外形方面的文件。另一种方法可在详细规范的附录中给出这种图形。 （8）用途或用途组别和（或）评定水平。 注：详细规范中采用的一个或几个评定水平应从分规范第3.5.4条中选择，这意味着只要试验的编组不变，几个评定水平可以共用一个空白详细规范。 （9）最重要特性的参考数据，以便在各种不同型号的电容器之间能进行比较。
Fixed capacitors for use in electronic equipment Part 3: Blank detail specification;chip capacitors Assessment level E
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 1993-01-21
- 实施
- 1993-08-01
本标准适用于固体电解质片状固定钽电容器。这类电容器主要用于直接安装在混合电路基板上或印刷电路板上。
Fixed capacitors for use in electronic equipment-Part 3: Sectional specification-Fixed tantalum chip capacitors
- ICS
- 31.060.40
- CCS
- B96
- 发布
- 1993-01-21
- 实施
- 1993-08-01
本标准等同采用国际标准IEC384-15-2（1984）《电子设备用固定电容器第十五部分：空白详细规范非固体电解质多孔阳极固定钮电容器评定水平E》。
Fixed capacitors for use in electronic equipment--Part 15: Blank detail specification--Tantalum capacitors with non-solid electrolyte and porous anode--Assessment level E
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 1991-04-15
- 实施
- 1991-12-01
本标准等同采用国际标准IEC384－15－1（1984）《电子设备用固定电容器第十五部分：空白详细规范非固体电解质箔电极钽电容器评定水平E》。
Fixed capacitors for use in electronic equipment--Part 15: Blank detail specification--Tantalum capacitors with non-solid electrolyte and foil electrode--Assessment level E
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 1991-04-15
- 实施
- 1991-12-01
Fixed capacitors for use in electronic equipment. Sectional specification. Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2021-09-14
- 实施
- 2021-09-14
Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- L11
- 发布
- 2021-09-13
- 实施
- 2021-09-13
Fixed capacitors for use in electronic equipment – Part 24: Sectional specification – Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- 发布
- 2021-09-07
- 实施
- 2021-09-07
Fixed capacitors for use in electronic equipment – Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- 发布
- 2021-09-07
- 实施
- 2021-09-07
This part of IEC 60384 applies to fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte, primarily intended for DC applications for use in electronic equipment. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) are not included but are covered by IEC 60384-18. These capacitors are primarily intended for use in electronic equipment to be mounted directly on substrates for hybrid circuits or to printed boards. Capacitors for special-purpose applications may need additional requirements. The object of this document is to prescribe preferred ratings and characteristics and to select from IEC 60384-1:2016, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted.
Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- 发布
- 2021-09-03
- 实施
- 2021-11-18 (7)
This part of IEC 60384 applies to fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte primarily intended for DC applications for use in electronic equipment. Fixed tantalum electrolytic surface mount capacitors with solid (MnO2) electrolyte are not included but are covered by IEC 60384-3. These capacitors are primarily intended for use in electronic equipment to be mounted directly on substrates for hybrid circuits or to printed boards. Capacitors for special-purpose applications may need additional requirements. The object of this document is to prescribe preferred ratings and characteristics and to select from IEC 60384-1:2016 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted.
Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
- ICS
- 31.060.40
- CCS
- 发布
- 2021-09-03
- 实施
- 2021-11-18 (7)
Detailed Specification for Electronic Components CA42 Solid Electrolyte Fixed Tantalum Capacitors Assessment Level E
- ICS
- 31.060.40
- CCS
- L 11
- 发布
- 2020-12-09
- 实施
- 2021-04-01
Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (IEC 40/2774/CDV) (english version)
- ICS
- 31.060.40
- CCS
- 发布
- 2020-12-01
- 实施
- 2020-12-01
Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte (IEC 40/2775/CDV) (english version)
- ICS
- 31.060.40
- CCS
- 发布
- 2020-12-01
- 实施
- 2020-12-01
Fixed capacitors for use in electronic equipment — Part 15:Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
- ICS
- 31.060.40
- CCS
- 发布
- 2019-11-15
- 实施
Fixed capacitors for use in electronic equipment — Part 15:Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
- ICS
- 31.060.40
- CCS
- 发布
- 2019-11-15
- 实施
