31.220.10 插头和插座装置、连接器 标准查询与下载

BS EN IEC 60512-27-200:2022 电气和电子设备连接器 测试和测量 IEC 60603-7 系列连接器上高达 2000MHz 的信号完整性测试的附加规范 测试 27a 至 27g

1   Scope This part of IEC 60512 covers additional, supplemental test method specifications to extend the upper frequency for the test connectors and associated indirect-reference test fixtures used in the signal integrity and transmission performance tests specified in IEC 60512‑27‑100. In support of de-embedded crosstalk and related transmission requirements specified in IEC 60603‑7‑81, for frequencies up to 2 000 MHz, these supplemental specifications extend the upper test frequency from IEC 60512‑27‑100 up to 500 MHz to the upper test frequency of IEC 60512‑28‑100 up to 2 000 MHz. This document covers measurements of connector signal integrity and transmission performance of 8-way connector types defined in these published connector series standards: IEC 60603‑7‑2 IEC 60603‑7‑3 IEC 60603‑7‑4 IEC 60603‑7‑5 IEC 60603‑7‑41 IEC 60603‑7‑51 IEC 60603‑7‑81 ...

Connectors for electrical and electronic equipment. Tests and measurements - Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors. Tests 27a to 27g

EN IEC 60512-27-200:2022 电气和电子设备连接器 测试和测量 第 27-200 部分：IEC 60603-7 系列连接器上高达 2000 MHz 的信号完整性测试的附加规范 测试 27a 至 27g

IEC 60512-27-200:2022 is primarily intended for use in signal integrity and transmission performance testing up to 2 000 MHz of IEC 60603-7 series 8-way connector type IEC 60603‑7‑81, according to connector test method IEC 60512‑28‑100. This part of IEC 60512 covers additional, supplemental test method specifications to extend the upper frequency for the test connectors and associated indirect-reference test fixtures used in the signal integrity and transmission performance tests specified in IEC 60512‑27‑100. In support of de-embedded crosstalk and related transmission requirements specified in IEC 60603‑7‑81, for frequencies up to 2 000 MHz, these supplemental specifications extend the upper test frequency from IEC 60512‑27‑100 up to 500 MHz to the upper test frequency of IEC 60512‑28‑100 up to 2 000 MHz. This document covers measurements of connector signal integrity and transmission performance of 8-way connector types defined in these published connector series standards: - IEC 60603‑7‑2 - IEC 60603‑7‑3 - IEC 60603‑7‑4 - IEC 60603‑7‑5 - IEC 60603‑7‑41 - IEC 60603‑7‑51 - IEC 60603‑7‑81. This document covers respective performance test procedures of connector signal integrity and transmission performance defined in these published connector test method series standards: - IEC 60512‑26‑100 - IEC 60512‑27‑100 - IEC 60512‑28‑100.

Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

EN IEC 63171-5:2022 电气和电子设备连接器 第5部分：屏蔽或非屏蔽、自由和固定的 2 路 M8 和 M12 圆形连接器的详细规范 机械配合信息、引脚分配和 5 型附加要求

This part of IEC 63171 describes shielded or unshielded circular connectors with 2 ways and M8 or M12 Styles, typically used for data transmission up to 600 MHz and with current carrying capacity up to 4 A, for use in areas with harsh environmental conditions. These connectors consist of fixed and free connectors either rewirable or non-rewirable. Male connectors have square cross- section contacts, for data and power transmission. M12 describes the dimensions of the styles and thread of the screw-locking mechanism according IEC 61076-2-101 of this size of circular connectors. M8 describes the dimensions of the styles and thread of the screw-locking mechanism according IEC 61076-2-104. The use of alternative locking mechanisms according to IEC 61076-2-010 or IEC 61076-2-011 are possible. The coding provided by this standard prevents the mating of accordingly coded male or female connectors to other similarly sized interfaces covered by this or other standards. These Type 5 connectors are interoperable with Type 2 connectors according IEC 63171-2, except the locking and sealing system provided by the outer shell. The shielded and unshielded connectors are interoperable for their internal transmission performance and can be exchanged. The shielded version has improved EMC and coupling properties. This part of IEC 63171 covers Type 5 connectors. Each part of this series has the associated type number equal to the number of the part in the series. All connectors in the IEC 63171 series are deemed to provide the same functions as defined in IEC 63171:2021, using different mechanical interfaces.

Connectors for electrical and electronic equipment - Part 5: Detail specification for 2-way M8 and M12 circular connectors, shielded or unshielded, free and fixed - Mechanical mating information, pin assignment and additional requirements for Type 5

T/LJQ 0009-2022 质量分级及“领跑者”评价要求 扩展坞

本文件规定了扩展坞“领跑者”标准评价的评价指标体系和评价方法及等级划分。 本文件适用于扩展坞制造企业的产品质量分级及企业标准水平评价。相关机构在制定企业标准“领跑者”评估方案时可参照使用。企业在制定企业标准时可参照使用。

Assessment requirements for quality grading and forerunner-Docking station

T/LJQ 0008-2022 质量分级及“领跑者”评价要求 移动终端用Type-C连接器

本文件规定了移动终端用Type-C连接器质量及企业标准水平评价的评价指标体系和评价方法及等级划分。 本文件适用于手机、笔记本、平板电脑、适配器等移动终端用Type-C连接器产品质量分级及企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner — Type-C connectors for mobile terminal

T/SZWCA 0001-2022 质量分级及“领跑者”评价要求 移动终端用Type-C连接器

本文件规定了移动终端用Type-C连接器质量及企业标准水平评价的评价指标体系和评价方法及等级划分。 本文件适用于手机、笔记本、平板电脑、适配器等移动终端用Type-C连接器产品质量分级及企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunner-Type-C connectors for mobile terminal

YD/T 4083-2022 数字通信对称电缆用连接器 第1部分：总则

本文件适用于在信息通信基础设施结构化综合布线系统中，数字通信对称电缆用连接器的设计、开发、生产和验收。

Connectors for symmetrical cables for digital communications Part 1: General

IEC 60512-27-200:2022 电气和电子设备连接器.试验和测量.第27-200部分:IEC 60603-7系列连接器上2000MHz以下信号完整性试验的附加规范.试验27a至27g

Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests

IEC 63171-5:2022 电气和电子设备连接器.第5部分:屏蔽或非屏蔽、自由和固定的双向M8和M12圆形连接器的详细规范.5型的机械配合信息、引脚分配和附加要求

Connectors for electrical and electronic equipment - Part 5: Detail specification for 2-way M8 and M12 circular connectors, shielded or unshielded, free and fixed - Mechanical mating information, pin

IEC 63171-4:2022 电气和电子设备连接器.第4部分:带载流能力的平衡单对数据传输用8路以下屏蔽或非屏蔽、自由和固定连接器的详细规范.4型的机械配合信息、引脚分配和附加要求

Connectors for electrical and electronic equipment - Part 4: Detail specification for shielded or unshielded, free and fixed connectors with up to 8 ways for balanced single-pair data transmission wit

KS C IEC 61020-4-2022 电子设备用机电开关 第4部分：杠杆（钮子）开关分规范

Electromechanical switches for use in electronic equipment Part 4：Sectional specification for lever(toggle) switches

KS C IEC 61020-3-1-2022 电子设备用机电开关 第3部分：直插式封装开关分规范 第1部分 空白详细规范

Electromechanical switches for use in electronic equipment－Part 3：Sectional specification for in－line package switches Section 1－Blank detail specification

22/30459667 DC BS EN 61076-2-101 电子设备连接器 产品要求 第 2-101 部分 圆形连接器 带螺钉锁紧的 M12 连接器详细规范

BS EN 61076-2-101. Connectors for electronic equipment. Product requirements - Part 2-101. Circular connectors. Detail specification for M12 connectors with screw-locking

22/30444943 DC BS EN 63171 电气和电子设备连接器 屏蔽或非屏蔽自由和固定连接器 用于具有载流能力的平衡单对数据传输 一般要求和测试

BS EN 63171. Connectors for electrical and electronic equipment. Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity. General requirements and tests

KS C IEC 60268-12-2022 音响系统设备 第12部分：广播及类似用途连接器的应用

Sound system equipment－Part 12：Application of connectors for broadcast and similar use

BS EN IEC 60512-99-002:2022 电气和电子设备连接器 测试和测量 耐力测试时间表 测试 99b：电力负载下拔出的测试计划（IEC 60512-99-002:2022）

1   Scope This part of IEC 60512 is used for the assessment of connectors within the scope of SC 48B that are used in twisted pair communication cabling with remote power, such as ISO/IEC 11801‑1 Class D, or better, balanced cabling in support of IEEE 802.3bt™ (Power over Ethernet, supporting up to 90 W from the power sourcing equipment). The object of this document is to detail a test schedule to determine the ability of sets of connectors to withstand a minimum of 100 mechanical operations with electrical load, where an electrical current is being passed through the connectors in accordance with IEC 60512‑9‑3 during the separation (unmating) step.

Connectors for electrical and electronic equipment. Tests and measurements - Endurance test schedules. Test 99b: Test schedule for unmating under electrical load (IEC 60512-99-002:2022)

22/30454420 DC BS EN 60092-378 电子设备连接器 产品要求 第 2 部分：圆形连接器的截面规范

BS EN 60092-378. Connectors for electronic equipment. Product requirements - Part 2. Sectional specification for circular connectors

ASTM B1004-16(2022) 电气连接系统接触性能分类的标准实施规程

1.1 This practice provides a method of specifying performance requirements for (or reporting test results of) electrical contact and connection systems. Both conductor and connector system performance may be specified by this practice, separately or in combination. 1.2 This practice may be used for separable or permanent contacts employing metallic conducting components. 1.3 This practice is applicable to both signal and power applications. 1.4 This practice is intended to be used for specifying performance of connectors and connection systems that are marketed for general public and trade application, as for instance for use in building wiring, electronics, and vehicles. 1.5 This practice is not intended to be used to specifying the performance of connection systems for specialized applications, such as military, industrial, aircraft, power distribution, and medical apparatus. 1.6 This practice does not specify the sample preparation or test sequences required for determining contact performance. It is the responsibility of the user of this practice to determine the applied test sequence(s) appropriate for the application. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provide by the manufacturer, to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Contact Performance Classification of Electrical Connection Systems

DB44/T 2354-2022 电力用户应急电源快速接口技术标准

Technical standard for fast interface of emergency power supply for power users

IEC 60512-99-002:2022 RLV 电气和电子设备用连接器.试验和测量.第99-002部分:耐久性试验计划.试验99b:电气负载下不匹配的试验计划

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load