31.220.10 插头和插座装置、连接器 标准查询与下载

DIN EN IEC 60352-4:2021 无焊连接 第4部分：不可触及的绝缘位移（ID）连接 一般要求、测试方法和实用指南（IEC 60352-4:2020）；德文版 EN IEC 60352-4:2020

This part of IEC 60352 is applicable to non-accessible ID connections for which the tests and measurements of clause 6 through 8 are suitable and which are made with: - appropriately designed ID terminations; - wires having solid round conductors of 0,25 mm to 3,6 mm nominal diam

Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance (IEC 60352-4:2020); German version EN IEC 60352-4:2020

BS EN IEC 61076-2-010:2021 电气和电子设备的连接器 产品要求 圆形连接器 根据IEC 61076-2-101、IEC 61076-2-109，I的配合接口，带外部或内部推拉锁定机构的连接器的详细规范

Connectors for electrical and electronic equipment. Product requirements. Circular connectors. Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC 61076-2-109, I

PN-EN IEC 60352-7-2021-08 E 无焊连接 第7部分：弹簧夹连接 一般要求、测试方法和实用指南（IEC 60352-7:2020）

Solderless connections -- Part 7: Spring clamp connections -- General requirements, test methods and practical guidance (IEC 60352-7:2020)

DS/EN IEC 61076-2-011:2021 电气和电子设备连接器“产品要求”第 2-011 部分：圆形连接器“根据 IEC 61076-2-101 和 IEC 61076-2-109 基于配合接口的 B12 卡口耦合连接器详细规范

Connectors for electrical and electronic equipment – Product requirements – Part 2-011: Circular connectors – Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101 and IEC 61076-2-109

LST EN IEC 61076-3-122:2021 电气和电子设备连接器 产品要求 第 3-122 部分：用于频率高达 500 MHz 和工业载流能力的 I/O 和数据传输的 8 路、屏蔽、自由和固定连接器的详细规范

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in indus

DS/EN IEC 61076-2-010:2021 电气和电子设备连接器“产品要求”第 2-010 部分：圆形连接器“带外部或内部推拉锁定机构的连接器的详细规范，基于符合 IEC 61076-2-101 的配合接口，IEC

Connectors for electrical and electronic equipment – Product requirements – Part 2-010: Circular connectors – Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC

KS C IEC TS 61586:2021 电连接器可靠性的估算

Estimation of the reliability of electrical connectors

KS C IEC TS 61586-2021 电连接器可靠性的估算

Estimation of the reliability of electrical connectors

KS C 5510-2021 用于电子设备的 R01 型圆柱形连接器

Type R01 cylindrical connectors for use in electronic equipment

PN-EN IEC 60603-7-2021-07 E 电子设备用连接器 第7部分：8 路、非屏蔽、自由和固定连接器的详细规范（IEC 60603-7:2020）

Connectors for electronic equipment -- Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2020)

GSO IEC 60512-28-100:2021 电气和电子设备连接器 测试和测量 第28-100部分：高达 2 000 MHz 的信号完整性测试 测试 28a 至 28g

IEC 60512-28-100:2019 is available as IEC 60512-28-100:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60512-28-100:2019 specifies the test methods for signal integrity and transmission performance for connectors specified in respective parts of IEC 60603-7, IEC 61076-1, IEC 61076-2, and IEC 61076-3 standards for connecting hardware applications up to 2 000 MHz. It is also suitable for testing lower frequency connectors, however, the test methodology specified in the detail specification for any given connector remains the reference conformance test for that connector. The above list of connector series of standards does not preclude referencing this document in other connector manufacturer’s specifications or published standards. Test procedures provided herein are: - insertion loss, test 28a; - return loss, test 28b; - near-end crosstalk (NEXT) test 28c; - far-end crosstalk (FEXT), test 28d; - transverse conversion loss (TCL), test 28f; - transverse conversion transfer loss (TCTL), test 28g. Other test procedures referenced herein are: - transfer impedance (ZT), see IEC 60512-26-100, test 26e. - for coupling attenuation (aC), see IEC 62153 4 12. This second edition cancels and replaces the first edition, issued in 2013, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - The title is revised from 1 000 MHz to 2 000 MHz to reflect the range of frequencies which may be tested. - All tables and requirements have been revised up to 2 000 MHz. Key words: Connectors, Signal Integrity Tests

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

GSO IEC 60603-7-82:2021 电子设备连接器 第7-82部分：8 路、12 触点、屏蔽、自由和固定连接器的详细规范 用于频率高达 2 000 MHz 的数据传输

IEC 60603-7-82:2016 covers 8-way, 12 contacts, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7-7, and specifies electrical transmission requirements, including power sum alien (exogenous) crosstalk, for frequencies up to 2 000 MHz. These connectors are typically used as "category 8.2" connectors in "class II" cabling systems specified in ISO/IEC TR 11801-9901 and specified in ISO/IEC 11801-1. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors, i.e. as defined in IEC 60603-7-7 and IEC 60603-7-1. These connectors are backward compatible with other IEC 60603-7 series connectors. Key words: Connectors, 8-way. Shielded Free and Fixed, Data Transmission

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

GSO IEC 61076-3-120:2021 电子设备连接器 产品要求 第3-120部分：矩形连接器 额定电压 250 V 直流和额定电流 30 A 的带弹簧锁的可重新接线电源连接器的详细规范

IEC 61076-3-120:2016 describes a 2 pole 30 A rectangular power connector with snap locking (hereinafter shortly referred to as connector), including overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods. The products covered by this detail specification are connectors without breaking capacity according to IEC 61984:2008 which are mainly for use in DC power distribution equipment in the telecommunications field, such as in outdoor telecom modules, distributed frames, etc. Key words: Connectors, Rectangular Connectors, Rewirable, Snap Locking

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A

GSO IEC PAS 61076-3-124:2021 电子设备连接器 产品要求 第2-124部分：工业应用 I/O 和千兆传输能力的 10 路、屏蔽、自由和固定连接器的详细规范

IEC/PAS 61076-3-124:2016(E) covers 10-way shielded free and fixed connectors and specifies the common dimensions, mechanical, electrical and transmission characteristics and environmental requirements as well as test specifications respectively. Key words: Connector, 10 way shielded free and fixed connector

Connectors for electronic equipment - Product requirements - Part 2-124: Detail specification for 10-way, shielded, free and fixed connectors for I/O and Gigabit transmission capability for industrial applications

GSO IEC 62946-02:2021 电子设备连接器 第02部分：8 路、非屏蔽、自由和固定高密度连接器的详细规范 数据传输频率高达 250 MHz 载流能力高达 1 A

IEC 62946-02:2017(E) covers 8-way, unshielded free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with extra low voltage current carrying capabilities up to 1 A, and is intended to specify the common dimensions, mechanical, electrical, signal integrity and environmental characteristics and tests for these connectors. The contents of the corrigendum of March 2020 have been included in this copy.

Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity up to 1 A

OVE EN IEC 60512-99-002:2021 电气和电子设备连接器 测试和测量 第 99-002 部分：耐久性测试计划 测试 99b：电气负载下拔插测试计划（IEC 48B/2881/CDV）（英文版）

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (IEC 48B/2881/CDV) (english version)

LST EN IEC 63171:2021 电气和电子设备用连接器 带载流能力的平衡单对数据传输用屏蔽或非屏蔽自由和固定连接器 一般要求和测试（IEC 63171:2021）

Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests (IEC 63171:2021)

PN-EN IEC 61076-2-114-2021-06 E 电气和电子设备用连接器 产品要求 第 2-114 部分：圆形连接器 用于高达 100 MHz 数据传输的带电源触点和信号触点的 M8 螺纹锁定连接器的详细规范（IEC 610

Connectors for electrical and electronic equipment -- Product requirements -- Part 2-114: Circular connectors -- Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz (IEC 610

BS EN IEC 61076-3-122:2021 电气和电子设备连接器 产品要求 用于 I/O 和数据传输的 8 路、屏蔽、自由和固定连接器的详细规范 频率高达 500 MHz 载流能力为

Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in...

DS/EN IEC 61076-3-122:2021 电气和电子设备用连接器“产品要求”第 3-122 部分：用于频率高达 500 MHz 和工业载流能力的 I/O 和数据传输的 8 路、屏蔽、自由和固定连接器的详细规范

Connectors for electrical and electronic equipment – Product requirements – Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in indus