31.220.10 插头和插座装置、连接器 标准查询与下载

DS/EN IEC 61076-3-122:2021 电气和电子设备用连接器“产品要求”第 3-122 部分：用于频率高达 500 MHz 和工业载流能力的 I/O 和数据传输的 8 路、屏蔽、自由和固定连接器的详细规范

Connectors for electrical and electronic equipment – Product requirements – Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in indus

DS/IEC 63171-2:2021 电气和电子设备连接器 第2部分：2 路、屏蔽或非屏蔽、自由和固定连接器的详细规范：机械配合信息、引脚分配和 2 型附加要求

Connectors for electrical and electronic equipment – Part 2: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 2

IEC 61076-2-011:2021 电气和电子设备连接器 产品要求 第 2-011 部分：圆形连接器 根据 IEC 61076-2-101 和 IEC 61076-2-109 基于配合接口的 B12 卡口耦合连接器的详细规范

This part of IEC 61076-2 describes the bayonet coupling interface of circular connectors that are typically used for industrial process measurement and control. These connectors consist of fixed and free connectors either rewireable or non-rewireable, with bayonet-coupling. These

Connectors for electrical and electronic equipment - Product requirements - Part 2-011: Circular connectors - Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101 and IEC 61076-2-109

IEC 63171-2:2021 电气和电子设备用连接器 第2部分：2 路、屏蔽或非屏蔽、自由和固定连接器的详细规范：机械配合信息、引脚分配和 2 型附加要求

This part of IEC 63171 covers 2-way, shielded or unshielded, free and fixed connectors for data transmission up to 600 MHz, with current-carrying capacity, known as Type 2. It specifies the common dimensions, mechanical, electrical and transmission characteristics and environment

Connectors for electrical and electronic equipment - Part 2: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 2

IEC 61076-2-010:2021 电气和电子设备的连接器 产品要求 第 2-010 部分：圆形连接器 具有外部或内部推拉锁定机构的连接器的详细规范，基于符合 IEC 61076-2-101 的配合接口，IEC

Connectors for electrical and electronic equipment - Product requirements - Part 2-010: Circular connectors - Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC

DS/EN IEC 63171:2021 电气和电子设备用连接器 带载流量的平衡单对数据传输用屏蔽或非屏蔽自由和固定连接器 一般要求和试验

Connectors for electrical and electronic equipment – Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity – General requirements and tests

BS EN IEC 63171:2021 电气和电子设备用连接器 带载流量的平衡单对数据传输用屏蔽或非屏蔽自由和固定连接器 一般要求和试验

Connectors for electrical and electronic equipment. Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity. General requirements and tests

PN-EN IEC 61076-2-012-2021-04 E 电气和电子设备连接器 产品要求 第 2-012 部分：圆形连接器 根据 IEC 61076-2-101、IEC 61076-2-，基于 M12 连接器接口的带内部推拉锁定的连接器的详细规范1个

Connectors for electrical and electronic equipment -- Product Requirements -- Part 2-012: Circular connectors -- Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-1

PN-EN IEC 60352-5-2021-04 E 无焊连接 第5部分：压入式连接 一般要求、测试方法和实用指南（IEC 60352-5:2020）

Solderless connections -- Part 5: Press-in connections -- General requirements, test methods and practical guidance (IEC 60352-5:2020)

LST EN IEC 60352-7:2021 无焊连接 第7部分：弹簧夹连接 一般要求、测试方法和实用指南（IEC 60352-7:2020）

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance (IEC 60352-7:2020)

OVE EN IEC 61076-2-104/AC:2021 电子设备连接器 产品要求 第 2-104 部分：圆形连接器 带 M8 螺钉锁定或弹簧锁定的圆形连接器的详细规范（勘误）（德文版）

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (Corrigendum) (german version)

OVE EN IEC 61076-2-101/AC:2021 电子设备连接器 产品要求 第 2-101 部分：圆形连接器 带螺钉锁定的 M12 连接器的详细规范（勘误）（德文版）

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (Corrigendum) (german version)

OVE EN IEC 61169-24:2021 射频连接器 第24部分：分规范 带螺钉耦合的射频同轴连接器，通常用于 75 O 电缆网络（F 型）（（IEC 61169-24:2019）EN IEC 61169-24:2019）（德语版本）

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F) (( IEC 61169-24:2019) EN IEC 61169-24:2019) (german version)

EN IEC 63171:2021 电气和电子设备用连接器.带载流量的平衡单对数据传输用屏蔽或非屏蔽自由和固定连接器.一般要求和试验

Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests

IEC 61076-3-122:2021 电气和电子设备连接器 产品要求 第 3-122 部分：用于频率高达 500 MHz 和工业载流能力的 I/O 和数据传输的 8 路、屏蔽、自由和固定连接器的详细规范

This part of IEC 61076 covers 8-way, shielded, free and fixed rectangular connectors for I/O and data transmission with frequencies up to 500 MHz. It is intended to specify the common dimensions, mechanical, electrical and environmental characteristics and tests for this family o

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in indus

DIN EN 61076-2-104 Berichtigung 1:2021 电子设备连接器. 产品要求. 第2-104部分: 圆形连接器. 带 M8 螺钉锁定或卡扣锁定的圆形连接器的详细规范(IEC 61076-2-104-2014); 德文版 EN 61076-2-104-2014; 勘误1

The correction was necessary to correct an inaccuracy that had been introduced in the national adoption of IEC 61076-2-104. The change applies to 6.4.2 in test procedure AP3 and relates to the acceleration to be applied.

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014); German version EN 61076-2-104:2014; Corrigendum 1

DIN EN 61076-2-101 Berichtigung 1:2021 电子设备连接器. 产品要求. 第2-101部分: 圆形连接器. 带螺钉锁定的M12连接器的详细规范(IEC 61076-2-101-2012); 德文版 EN 61076-2-101-2012; 勘误1

The correction was necessary to correct an inaccuracy that had been introduced in the national adoption of IEC 61076-2-101. The change applies to 6.4.2 in test procedure AP3 and relates to the acceleration to be applied.

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (IEC 61076-2-101:2012); German version EN 61076-2-101:2012; Corrigendum 1

OVE EN IEC 61076-3-123:2021 电气和电子设备连接器 产品要求 第 3-123 部分：矩形连接器 工业环境用混合连接器详细规范，用于电源和光纤数据传输，带推拉式定位

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc

IEC 63171:2021 电气和电子设备用连接器 带载流能力的平衡单对数据传输用屏蔽或非屏蔽自由和固定连接器 一般要求和试验

This document covers shielded and unshielded free and fixed connectors, circular or rectangular, for balanced single-pair data transmission, with current-carrying capacity. It specifies the IEC 63171 series' common mechanical, electrical and transmission characteristics and envir

Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests

DS/EN IEC 60352-7:2021 无焊连接 第7部分：弹簧夹连接 一般要求、测试方法和实用指南

Solderless connections – Part 7: Spring clamp connections – General requirements, test methods and practical guidance