插头和插座装置、连接器标准-分析测试百科网

EN IEC 60352-7:2021 无焊连接.第7部分：弹簧夹连接.一般要求，试验方法和实用指南

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

ICS: 31.220.10
CCS
发布: 2021-02-01
实施

DIN EN IEC 60512-9-5:2021 电气和电子设备用连接器. 试验和测量. 第9-5部分: 耐久试验. 试验9e: 周期性电流负载 (IEC 60512-9-5-2020); 德文版本EN IEC 60512-9-5-2020

This part of IEC 60512, when required by the detail specification, is used for testing connectors or solderless connections within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this document is

Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2020); German version EN IEC 60512-9-5:2020

ICS: 31.220.10
CCS: L23
发布: 2021-02-00
实施: 2021-02-01

DIN EN IEC 61076-3-123:2021 电气和电子设备连接器. 产品要求. 第3-123部分: 矩形连接器. 工业环境、供电和光纤数据传输用带推拉锁的混合连接器详细规范(IEC 61076-3-123-2019); 德文版本EN IEC 61076-3-123-2019

This International Standard covers hybrid rectangular connectors with a 3 poles 16 A electric portion (2P+PE or 2P+FE) for power supply and one duplex fibre optic connector type LC portion for data transmission. These connectors consist of fixed and free connectors, either rewira

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc

ICS: 31.220.10
CCS: L23
发布: 2021-02-00
实施: 2021-02-01

LST EN IEC 60603-7:2021 电子设备连接器第7部分：8 路、非屏蔽、自由和固定连接器的详细规范（IEC 60603-7:2020）

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2020)

ICS: 31.220.10
CCS
发布: 2021-01-29
实施: 2021-01-29

PN-EN IEC 63171-1-2021-01 E 电气和电子设备连接器第1部分：双向、屏蔽或非屏蔽、自由和固定连接器的详细规范机械配合信息、引脚分配和 1 类铜 LC 型（IEC

Connectors for electrical and electronic equipment -- Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors -- Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style (IEC

ICS: 31.220.10
CCS
发布: 2021-01-20
实施: 2021-01-20

PN-EN IEC 61076-8-102-2021-01 E 电气和电子设备用连接器产品要求第 8-102 部分：电源连接器额定电流为 150 A 的 2 极或 3 极电源加 2 极信号屏蔽和密封塑料外壳连接器的详细规范

Connectors for electrical and electronic equipment -- Product requirements -- Part 8-102: Power connectors -- Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A

ICS: 31.220.10
CCS
发布: 2021-01-19
实施: 2021-01-19

PN-EN IEC 61076-8-101-2021-01 E 电气和电子设备用连接器产品要求第 8-101 部分：电源连接器额定电流为 40 A 的 2 极或 3 极电源加 2 极信号屏蔽和密封塑料外壳连接器的详细规范

Connectors for electrical and electronic equipment -- Product requirements -- Part 8-101: Power connectors -- Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A

ICS: 31.220.10
CCS
发布: 2021-01-15
实施: 2021-01-15

PN-EN IEC 61076-8-100-2021-01 E 电气和电子设备用连接器产品要求第 8-100 部分：电源连接器 2 极或 3 极电源加 2 极信号屏蔽和密封塑料外壳额定电流 20 A 连接器的详细规范

Connectors for electrical and electronic equipment -- Product requirements -- Part 8-100: Power connectors -- Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A

ICS: 31.220.10
CCS
发布: 2021-01-15
实施: 2021-01-15

LST EN IEC 61076-2-114:2021 电气和电子设备用连接器产品要求第 2-114 部分：圆形连接器带电源触头和信号触头的 M8 连接器详细规范，用于高达 100 MHz 的数据传输（IEC 61076-

Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz (IEC 61076-

ICS: 31.220.10
CCS
发布: 2021-01-15
实施: 2021-01-15

IEC 61984:2008/COR1:2021 连接器 - 安全要求和测试

Connectors - Safety requirements and tests

ICS: 31.220.10
CCS
发布: 2021
实施: 0000-00-00

KS C IEC 60068-2-43:2020 环境测试 - 第2-43部分:测试 - 测试Kd:联系人和连接的硫化氢测试

Environmental testing — Part 2-43: Tests — Test Kd: Hydrogen sulphide test for contacts and connections

ICS: 31.220.10
CCS
发布: 2020-12-30
实施

KS C IEC 60603-4:2020 连接器用于频率低于3MHz用于与印制电路板用 - 第4部分:两件式连接器具有以相同的间距为1.91毫米（0.075英寸）中心和交错线端子间隔开的接触印制电路板

Connectors for frequencies below 3MHz for use with printed boards — Part 4：Two-part connectors for printed boards having contacts spaced at 1.91 mm(0.075 in) centres and staggered terminations at that

ICS: 31.220.10
CCS
发布: 2020-12-30
实施

KS C IEC 60068-2-42:2020 环境测试 - 第2-42部分:测试 - 测试Kc:接触和连接的二氧化硫测试

Environmental testing — Part 2-42: Tests — Test Kc: Sulphur dioxide test for contacts and connections

ICS: 31.220.10
CCS
发布: 2020-12-30
实施

KS C IEC 60603-4-2020 连接器用于频率低于3MHz用于与印制电路板用 - 第4部分:两件式连接器具有以相同的间距为1.91毫米（0.075英寸）中心和交错线端子间隔开的接触印制电路板

ICS: 31.220.10
CCS
发布: 2020-12-30
实施

KS C IEC 60603-10:2020 用于频率低于3 Mhz的连接器用于印刷电路板 - 第10部分:2.54 Mm（0.1 In）基本电网印刷电路板的两部分连接器反相型

Connectors for frequencies below 3 MHz for use with printed boards —Part 10: Two-part connectors for printed boards for basic grid of 2.54 mm (0.1 in), inverted type

ICS: 31.220.10
CCS
发布: 2020-12-30
实施

KS C IEC 60068-2-42-2020 环境测试 - 第2-42部分:测试 - 测试Kc:接触和连接的二氧化硫测试