33.040.30 交换和信令系统 标准查询与下载

ITU-T Q.1742.2 ERRATUM 1-2004 IMT-2000 参考（2002年7月11日批准）ANSI-41 演进核心网络和 cdma2000 接入网络；勘误表 1

IMT-2000 references (approved as of 11 July 2002) to ANSI-41 evolved core network with cdma2000 access network; Erratum 1

ITU-T Q SUPP 48-2004 用于指定网络控制和应用层之间的 API/对象接口的指南文档

There are many API/Object Interface-related activities outside of ITU-T Study Group 11 and API/Object Interface specifications are developed in them. In order to enhance the usefulness of such API/Object Interface, some common guideline may be required. This Supplement intends to clarify the guidelines that make sure the effectiveness of each API/Object Interface and facilitate the smooth introduction of it.

Guideline document for specifying API/object interface between network control and application layer

ITU-T Q SUPP 9-2004 技术报告 TRQ.2000：TRQ.2xxx 系列技术报告的路线图

This Supplement specifies the index for the TRQ.2xxx-series Technical Reports.

Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series Technical Reports

ITU-T Q SUPP 50-2004 技术报告 TRQ.2145：窄带信令语法（NSS）的要求

Technical Report TRQ.2145: Requirements for a Narrow-band Signalling Syntax (NSS)

DS/EN 50065-2-2/Corr.:2004 3 kHz 至 148.5 kHz 频率范围内低压电气装置的信号 第 2-2 部分：在 95 kHz 至 148.5 kHz 频率范围内运行并用于以下用途的电源通信设备和系统的抗扰度要求

This standard applies to electrical equipment using signals in the frequency range 95 kHz to 148,5 kHz to transmit or receive information on low voltage electrical systems, in industrial environments. In the case of equipment which includes functions other than the transmission or reception of information on low voltage electrical supplies, this standard applies only to that part of the equipment intended for such transmission or reception of information. Other parts of the equipment shall comply with the immunity standard or standards relevant to the functions of those other parts. In the event of tests being specified in those other standards of a differe

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in

DS/EN 50065-2-3/Corr:2004 kHz 至 148.5 kHz 频率范围内低压电气装置的信号 第 2-3 部分：在 3 kHz 至 95 kHz 频率范围内运行并供 ele 使用的电源通信设备和系统的抗扰度要求

This standard applies to electrical equipment using signals in the frequency range 3 kHz to 95 kHz to transmit or receive information on low voltage electrical systems, for electricity suppliers and distributors. In the case of equipment which includes functions other than the transmission or reception of information on low voltage electrical supplies, this standard applies only to that part of the equipment intended for such transmission or reception of information. Other parts of the equipment shall comply with the immunity standard or standards relevant to the functions of those other parts. In the event of tests being specified in those other standards

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by ele

DS/EN 50065-2-1/Corr.:2004 kHz 至 148.5 kHz 频率范围内的低压电气装置信号 第 2-1 部分：在 95 kHz 至 148.5 kHz 频率范围内运行并打算用于以下用途的电源通信设备和系统的抗扰度要求

This standard applies to electrical equipment using signals in the frequency range 95 kHz to 148,5 kHz to transmit or receive information on low voltage electrical systems, residential, commercial and light industrial environments. In the case of equipment which includes functions other than the transmission or reception of information on low voltage electrical supplies, this standard applies only to that part of the equipment intended for such transmission or reception of information. Other parts of the equipment shall comply with the immunity standard or standards relevant to the functions of those other parts. In the event of tests being specified in tho

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in

YD/T 1302-2004 国内No.7信令方式技术要求——GSM移动电话用户部分(MTUP)

National No.7 signalling system technical requirement-GSM mobile tetephone user part(MTUP)

YD/T 1304-2004 国内No.7信令方式测试方法-消息传递部分(MTP)和电话用户部分(TUP)

Test specification for national No.7 signalling system-Message Transfer Part (MTP) and Telephone User Part (TUP)

ANSI/ATIS 1000114-2004 7号信令系统(SS7).事务处理能力应用部分(TCAP)

Signalling System Number 7 (SS7) - Transaction Capabilities Application Part (TCAP)

ANSI T1.427.01-2004 基于ATM的多对连接

This document provides requirements for advanced bonding of multiple digital subscriber lines (DSL) to transport ATM streams. The specifications of this standard provide a complete description of startup, operational, and contingency modes of operation w

ATM-Based Multi-Pair Bonding

ANSI T1.114-2004 第7号信令系统(SS7).事务处理能力应用部分(TCAP)

This standard specifies Transaction Capabilities (TC) for Signalling System 7 (SS7). This specification is intended to provide, in an open-ended manner, the capabilities needed to support present and near-term ISDN and non ISDN services requiring transac

Signalling System Number 7 (SS7) - Transaction Capabilities Application Part (TCAP)

ANSI/TIA-464-C-1-2004 PBX开关设备的电信多线终端设备要求,附件1

Updates ANSI/TIA-464-C to make it in-line with the new changes mandated by FCC for Part 68 product registration

Telecommunications Multiline Terminal Systems Requirements for PBX Switching Equipment, Addendum 1

ANSI/ATIS 0600427.01-2004 基于异步传输模式(ATM)的多线对绑定

ATM-Based Multi-Pair Bonding

YD/T 1296-2003 公用IP语音交换机设备技术要求

Technical specification for public IP voice switch

LST EN 50065-2-2-2003 频率范围为 3 kHz 至 148.5 kHz 的低压电气装置信号 第 2-2 部分：在 95 kHz 至 148.5 kHz 频率范围内运行并用于以下用途的电源通信设备和系统的抗扰度要求

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in

LST EN 50065-2-1+AC-2003 kHz 至 148.5 kHz 频率范围内低压电气装置的信号传输 第 2-1 部分：在 95 kHz 至 148.5 kHz 频率范围内运行并预期使用的电源通信设备和系统的抗扰度要求我

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i

ITU-T Q SUPP 47-2003 IMT-2000 网络的紧急服务 协调和融合的要求

This Supplement is an information document and is intended to outline the requirements and provisions for Emergency Services for IMT-2000 systems. This is a compilation from sources outside the ITU (e. g., administrations, Standards Development Organizations, and the Third Generation Partnership Projects (3GPP and 3GPP2)). The scope includes any relevant discussion concerning the provisioning of Emergency Services specifically addressing the IMT-2000 systems during Harmonization and Convergence periods.

Emergency services for IMT-2000 networks - Requirements for harmonization and convergence

DIN EN 301927:2003 卫星地面站和系统.空间标准化的欧洲合作.卫星软件数据处理接口

The European standard specifies requirements in the telecommunications sector.

Satellite Earth Stations and Systems (SES) - European Co-operation for Space Standardization (ECSS) - Satellite Software Data Handling Interfaces (SSDHI) (Endorsement of the English version EN 301927 V 1.1.1 (2003-02) as German standard)

YD/T 1287-2003 具有路由功能的以太网交换机测试方法

Test specification for ethernet LAN switch with routing capability