33.040.35 电话网 标准查询与下载
共找到 918 条与 电话网 相关的标准，共 62 页
Information technology－Telecommunications and information exchange between systems－Private Integrated Services Network－Inter-exchange signalling protocol－Path Replacement additional network feature
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Information technology－Telecommunications and information exchange between systems－Corporate telecommunication networks－Signalling interworking between QSIG and H.323－Call transfer supplementary services
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Information technology－Telecommunications and information exchange between systems－Private Integrated Services Network－Inter-exchange signalling protocol－Advice Of Charge supplementary services
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Information technology－Telecommunications and information exchange between systems－Private Integrated Services Network－Inter-exchange signalling protocol－Call interception additional network feature
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Information technology－Telecommunication and information exchange between systems－Private Integrated Services Network－Inter－exchange signalling protocol－Single Step Call Transfer supplementary service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Information technology－Telecommunication and information exchange between systems－Interoperation of PISNs with IP networks
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Information technology－Telecommunications and information exchangebetween systems－Private Integrated Services Networks－Inter-exchange signaling protocol－Short message services
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-23
- 实施
Supplement 9 to ITU-T E.800-series Recommendations (Guidelines on regulatory aspects of QoS)
- ICS
- 33.040.35
- CCS
- 发布
- 2013-12-01
- 实施
This International Standard specifies signalling interworking between “QSIG” and “H.323” in support of generic functional procedures for supplementary services within a Corporate telecommunication Network (CN). “QSIG” is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated Services Network (PISN). The Q reference point is defined in ISO/IEC 11579-1. A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in other Standards, in particular ISO/IEC 11572 (call control in support of basic services), ISO/IEC 11582 (generic functional protocol for the support of supplementary services) and a number of standards specifying individual supplementary services. “H.323” is a set of signalling protocols for the support of voice or multimedia communication within a packet network, in particular a packet network that uses the Internet Protocol (IP) as its network layer protocol (IP network). H.323 signalling protocols operate between endpoints in an IP network, either indirectly via one or more gatekeepers, or directly. An endpoint can be a terminal or a gateway to another network. H.323 is an “umbrella” recommendation, referring to various ITU-T recommendations, in particular Recommendations H.225.0 and H.245 (basic communication capabilities) and Recommendation H.450.1 (generic functional protocol for the support of supplementary services). NOTE - H.450.1 applies to the 1998 version of H.323 (also known as H.323 version 2) and to later versions. Interworking between QSIG and H.323 permits a call originating at a user of a PISN to terminate at a user of an IP network, or a call originating at a user of an IP network to terminate at a user of a PISN. In addition this International Standard enables the participants of a call to exchange supplementary service control information in a generic way. The more specific aspects of interworking particular supplementary services are specified in other Standards. This International Standard is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG and an IP network employing H.323.
Information technology -- Telecommunications and information exchange between systems -- Corporate telecommunication networks -- Signalling interworking between QSIG and H.323 -- Generic functional protocol for the support of supplementary services
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies supplementary service Make Call Request (SS-MCR), which is related, but not limited, to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ISO/IEC 11574. The supplementary service MCR enables a Requesting User to request a Co-operating User to establish a new Requested Call to a Destination User. This new Requested Call between the Co-operating and Destination User can be either a Basic call or call independent signalling connection. Service specifications are produced in three stages, according to the method described in ETS 300 387. This International Standard contains the stage 1 and stage 2 specifications of SS-MCR. The stage 1 specification (Clause 6) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (Clause 7) specifies the functional entities involved in the supplementary service and the information flows between them.
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Make call request supplementary service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Abstract ISO/IEC 20115:2004 specifies the combination of base standards, together with the selection of appropriate options and parameter values, necessary to specify how QSIG/PSS1 can be used for Message Centre Access (MCA) procedures. ISO/IEC 20115:2004 identifies the necessary or optional employment of particular functions, procedures and services for a •Calling User to deposit messages for a Served User at a Message Centre, •Served User to monitor the Served User's Mailbox for new messages, •Served User to browse through the messages saved in the Served User's Mailbox, •Served User to retrieve the messages saved in the Served User's Mailbox, and •Served User to get connected to the Originator of a message or any other destination.
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Use of QSIG for Message Centre Access (MCA) profile standard
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
لايوجد
Information technology -- Telecommunications and information exchange between systems - Interoperation of PISNs with IP networks
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the supplementary service Simple Dialog (SS-SD), which is applicable to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ISO/IEC 11574. Supplementary service SD enables a user to communicate with another user or application by the exchange of keypad and display information transparently over a PISN. Service specifications are produced in three stages, according to the method described in ETS 300 387. This International Standard contains the stage 1 and stage 2 specifications of SS-SD. The stage 1 specification (clause 6) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (clause 7) specifies the functional entities involved in the supplementary service and the information flows between them.
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Simple dialog supplementary service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Abstract ISO/IEC 21408:2003 specifies the signalling protocol for the support of the Simple Dialog supplementary service (SS-SD) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). Supplementary service SD enables a user to communicate with another user or application by the exchange of keypad and display information transparently over a PISN. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 21408:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 21407. The signalling protocol for SS-SD operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. ISO/IEC 21408:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-SD and other supplementary services and ANFs. ISO/IEC 21408:2003 is applicable to PINXs which can interconnect to form a PISN.
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Simple dialog supplementary service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Scope is not provided for this standard
Information technology -- Telecommunications and information exchange between systems -- Corporate telecommunication networks -- Signalling interworking between QSIG and H.323 -- Call transfer supplementary services
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Abstract ISO/IEC 19460:2003 specifies the signalling protocol for the support of the Single Step Call Transfer supplementary service (SS-SSCT) at the Q reference point between Private Integrated Network services eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). SS-SSCT is a supplementary service which enables a user, user A, to transform an existing call between user A and user B into a new call between user B and a user C whereby user A does not have a call established with user C prior to call transfer. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 19460:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 19459. The signalling protocol for SS-SSCT operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. ISO/IEC 19460:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between Single Step Call Transfer and other supplementary services and ANFs. ISO/IEC 19460:2003 is applicable to PINXs which can interconnect to form a PISN.
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Single Step Call Transfer supplementary service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Scope is not provided for this standard
Information technology -- Telecommunications and information exchange between systems -- Corporate telecommunication networks -- Signalling interworking between QSIG and H.323 -- Call diversion supplementary services
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Abstract ISO/IEC 20114:2004 specifies the signalling protocol for the support of the Make Call Request supplementary service (SS-MCR) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). Supplementary service MCR enables a Requesting User to request a Co-operating User to establish a new Requested Call to a Destination User. This new Requested Call between the Co-operating and Destination User can be either a Basic call or a Call Independent Signalling Connection. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 20114:2004 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 20113. The signalling protocol for SS-MCR operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. ISO/IEC 20114:2004 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-MCR and other supplementary services and ANFs. ISO/IEC 20114:2004 is applicable to PINXs, which can interconnect to form a PISN.
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network (PISN) -- Inter-exchange signalling protocol -- Make call request supplementary service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Not Available
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Specification, functional model and information flows -- Single Step Call Transfer Supplementary Service
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
Not Available
Information technology -- Telecommunications and information exchange between systems -- Broadband Private Integrated Services Network -- Inter-exchange signalling protocol -- Generic functional protocol
- ICS
- 33.040.35
- CCS
- 发布
- 2013-09-09
- 实施
