33.040.60 标准查询与下载

DIN EN 61334-3-22:2001 配电线路载波系统配电自动化.第3-22部分:主要信令要求.MV 相位到地面和网屏到地面的侵入式耦合装置

The document is applicable to MV phase-to-earth capacitive and sreen-to-earth intrusive inductive coupling devices for medium voltage (MV) distribution line carrier (DLC) systems. Non-intrusive inductive coupling devices are not within the scope of the document.

Distribution automation using distribution line carrier systems - Part 3-22: Mains signalling requirements; MV phase-to-earth and screen-to-earth intrusive coupling devices (IEC 61334-3-22:2001); German version EN 61334-3-22:2001; Text in English

DIN EN 61334-5-1:2001 配电线路载波系统的配电自动化.第5-1部分:低层轮廓.扩展频率转换键控轮廓

Distribution automation using distribution line carrier systems - Part 5-1: Lower layer profiles; The spread frequency shift keying (S-FSK) profile (IEC 61334-5-1:2001); German version EN 61334-5-1:2001; Text in English

NF C46-905-1*NF EN 61334-5-1:2001 使用配线载波系统的分配自动化.第5-1部分:低层轮廓.扩展频率移位键 (S-FSK) 控轮廓

Distribution automation using distribution line carrier systems - Part 5-1 : lower layer profiles - The spread frequency shift keying (S-FSK) profile.

BS EN 61334-5-1:2001 使用配电线路载波系统的配电自动化 下层轮廓 扩频频移键控(S-FSK)配置文件

This part of IEC 61334 describes the requirements of S-SFK (frequency shift keying modulation) in conjunction with the services provided by the physical layer entity and the MAC sublayer. The transmission medium is assumed to be the distribution network on both MV or LV level. The MAC sublayer described in this standard interfaces with the logical link control layer described in IEC 61334-4-32. The three parts - modulation, physical layer and MAC sublayer - are matched to each other so that an optimum cost-performance relation can be achieved. The profile described in this standard is one of several profiles (described in series IEC 61334-5) which are all designed for data transmission via the distribution network. Considering the ongoing technical development in this field, the profiles are published first as technical specifications with the intention to transform into standards those profiles which are successful in practice.

Distribution automation using distribution line carrier systems. Lower layer profiles. The spread frequency shift keying (S-FSK) profile

BS EN 61334-4-511:2001 使用配电线路载波系统的配电自动化 数据通信协议 系统管理 CIASE协议

In addition to management, underlying services and protocols are also covered.

Distribution automation using distribution line carrier systems. Data communication protocols. Systems management. CIASE protocol

BS EN 61334-6:2001 使用配电线路载波系统的配电自动化 A-XDR编码规则

This part of IEC 61334 defines a set of encoding rules - the A-XDR encoding rules - that may be used to derive the specification of a transfer syntax for values of types defined in the DLMS core standard using the ASN.1 notation (see IEC 61334-4-41). These A-XDR encoding rules are also to be applied for decoding such a transfer syntax in order to identify the data values being transferred. The A-XDR encoding rules · are used at the time of communication; · provide optimal encoding for DLMS PDUs. NOTE Provided that A-XDR ensures optimal encoding for DLMS PDUs, it is intended to be the default encoding rule for DLMS-based communication protocols. Nevertheless, the default - and also the possibly usable optional -encoding rules will be specified in the Application Layer document of the given protocol (for example, IEC 61334-4-42), as part of the Application context. note:3) A-XDR stands for Adapted XDR. In fact, these encoding rules are derived from a proven and de facto standard of the Unix world, called XDR (external Data Representation, rfc1014). 4) See footnote 2 of the introduction.

Distribution automation using distribution line carrier systems. A-XDR encoding rule

DIN EN 61334-4-511:2001 利用配电线路载波系统实现配电自动化.第4-511部分:数据通信协议.系统管理.CIASE协议

The document specified the DCP management requirements.

Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols; Systems management; CIASE protocol (IEC 61334-4-511:2000); German version EN 61334-4-511:2000, text in English

DIN EN 61334-6:2001 利用配电线路载波系统实现配电自动化.第6部分:A-XDR编码规则

The document comprises encording rules for DLMS communication protocols.

Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule (IEC 61334-6:2000); German version EN 61334-6:2000, text in English

IEC 61334-3-22:2001 采用配电线载波系统的配电自动化 第3-22部分：主干线信号传输要求 中压相对和屏对地插入式耦合装置

This part of IEC 61334 is applicable to MV phase-to-earth capacitive and screen-to-earth intrusive inductive coupling devices for medium voltage (MV) distribution line carrier (DLC) systems. Non-intrusive inductive coupling devices are not within the scope of this standard. The coupling device ensures a) the efficient transmission/reception of carrier-frequency signals between the DLC transceiver and the power line; b) the safety of personnel and the protection of the low-voltage parts of the installation against the effects of the power-frequency voltage and transient overvoltages. The object of this part of IEC 61334 is to establish definitions, requirements, methods of testing and rated values for phase-to-earth capacitive and screen-to-earth intrusive inductive coupling devices to be used in MV-DLC systems.

Distribution automation using distribution line carrier systems - Part 3-22: Mains signalling requirements; MV phase-to-earth and screen-to-earth intrusive coupling devices

IEC TS 61334-5-3:2001 使用分配线载波系统的分配自动化.第5-3部分:低层文件.扩展谱带适配的宽带截面

This specification describes the requirements of the spread spectrum adaptive wideband (SS-AW) approach which incorporates the services provided by the physical layer entity and the MAC sublayer. The transmission medium is assumed to be the distribution network on both the MV or LV level. The MAC sublayer described in this specification interfaces with the logical link control (LLC) layer described in IEC 61334-4-32. The noise and signal attenuation characteristics of the MV and LV networks require a hierarchical approach, where methods for modulation/demodulation, synchronization, equaliza-tion, error control coding, and media access control are designed specifically for this hostile communications environment. This approach includes a low-level link protocol within the MAC sublayer that incorporates some functions generally associated with a data link control procedure. This specification describes such a hierarchical approach based on a spread spectrum physical layer with fast synchronization enabling short-duration transmissions and adaptive equalization. This coupled with a low-level link protocol, the effective utilization of error correction and detection, and robust medium access management provides a robust, reliable platform for the LLC sublayer. The adaptive component of this approach refers to the equalization method used to compensate for the time-varying nature of the communication channel impairments. The receiver must select appropriate equalization values to adapt to the changing channel characteristics, which can be node-specific, on a frame basis to achieve optimal performance. The equalization parameters are adjusted based on various quality metrics available from the received frame, for example, the Hamming distance of the synchronization preamble, the error-free status of the frame header and data block, if present, or the failure to receive an expected response. The equalization methods are well-known and the precise method is determined by the particular implementation of this specification. This allows cost/performance trade-offs and future improvements to occur without losing compatibility.

Distribution automation using distribution line carrier systems - Part 5-3: Lower-layer profiles; Spread spectrum adaptive wideband (SS-AW) profile

CNS 11011-2000 用户电话机

本标准适用于一般用之用户电话机。

Subscriber telephone set

CNS 13452-2000 有线电话无线主副机(80MHz以下)

本标准适用于交通部公告使用频段在 80MHz 以下之低功率双工有线电话无线主副机（Cordless Telephone Set）产品，简称无线电话机（CT0）。

Cordless telephone (frequency below 80 MHz)

CNS 12890-2000 多功能用户电话机

本标准适用于多功能用户电话机（以下简称电话机）。其中包括重拨、保留、免持送受话器拨号、受话音量放大及记忆等功能。

Multi-functions subscriber telephone set

IEC 61334-6:2000 采用配电线载波系统的配电自动化 第6部分:A-XDR编码规则

This part of IEC 61334 defines a set of encoding rules - the A-XDR encoding rules - that may be used to derive the specification of a transfer syntax for values of types defined in the DLMS core standard using the ASN.1 notation (see IEC 61334-4-41). These A-XDR encoding rules are also to be applied for decoding such a transfer syntax in order to identify the data values being transferred. The A-XDR encoding rules · are used at the time of communication; · provide optimal encoding for DLMS PDUs. NOTE Provided that A-XDR ensures optimal encoding for DLMS PDUs, it is intended to be the default encoding rule for DLMS-based communication protocols. Nevertheless, the default - and also the possibly usable optional - encoding rules will be specified in the Application Layer document of the given protocol (for example, IEC 61334-4-42), as part of the Application context. note: 3) A-XDR stands for Adapted XDR. In fact, these encoding rules are derived from a proven and de facto standard of the Unix world, called XDR (external Data Representation, rfc1014). 4) See footnote 2 of the introduction.

Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule

IEC 61334-4-511:2000 采用配电线载波系统的配电自动化 第4-511部分:数据通信协议 系统管理 CIASE协议

This part of IEC 61334 specifies the DCP management requirements. It describes the manage-ment services in an abstract way as well as the underlying protocol. It defines terminology and describes concepts for DCP systems management, describes DCP systems management activities and facilities, and specifies DCP services and protocol.

Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols; Systems management; CIASE protocol

DIN EN 61334-4-33:1999 利用配电线路载波系统实现配电自动化.第4-33部分:数据通信协议.数据链接层.连接定向协议

The document covers the service required of, or by, the data communication protocol (DCP) logical link control (LLC) sublayer entity at the logical interfaces with the LLC user layer and the medium access control (MAC) sublayer using the connection oriented LLC procedures.

Distribution automation using distribution line carrier systems - Part 4-33: Data communication protocols; data link layer; connection oriented protocol (IEC 61334-4-33:1998); German version EN 61334-4-33:1998, text in English

DIN EN 61334-4-61:1999 配电线路载体系统的配电自动化.第4-61部分:数据通信协议.网络层.非连接协议

The document covers the services required of, or by, the data communication protocol (DCP) network layer (N) sublayer entity at the logical link interfaces with the N user layer and the logical link control (LLC) sublayer using the connectionless N procedures.

Distribution automation using distribution line carrier systems - Part 4-61: Data communication protocols; network layer; connectionless protocol (IEC 61334-4-61:1998); German version EN 61334-4-61:1998, Text in English

IEC 61334-3-1:1998 采用配电线载波系统的配电自动化 第3-1部分:主干线信号传输要求 频带和输出电平

This part of IEC 61334 applies to electrical equipment to be used in distribution line carrier (DLC) systems on both medium-voltage (MV) and low-voltage (LV) distribution networks. It specifies the requirements (frequency bands, output levels, spurious emissions, etc.) for MV and LV distribution networks respectively. It specifies disturbance limits in the frequency range from 3 kHz up to 30 MHz. The upper frequency limit has been fixed at 30 MHz according to the CISPR recommendations for conducted disturbances. It does not specify the signal modulation methods nor the coding methods nor functional features. Environmental requirements and tests are not included. NOTE - In most countries the transmission is subject to regulation. Compliance with this standard does not imply permission to establish communication on a public supply network, between public supply networks and consumer installations, or between consumer installations where this would not otherwise be allowed. The object of this standard is to limit mutual influence between signal transmission equipment in electrical installations and between such equipment and other equipment. In addition, this standard is intended to limit interference caused by signal transmission equipment to sensitive electronic equipment. In some cases, interference caused by other electrical equipment may lead to misoperation of the mains signalling equipment. Guidance on proper use and warning of improper use are included in the installation and operating instructions supplied with each item of equipment. Where appropriate, a notice is attached securely to each product giving the substance of the following warning: Mains signalling must not be used to control equipment that could become a hazard to people or property if it inadvertently operates or fails to operate in any way.

Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels

BS IEC 61334-1-4:1998 使用配电线路载波系统的自动配电.一般考虑.关于中压和低压配电干线数据传输参数的识别指南

Covers a number of typical installations but is designed to incorporate future developments when they become available.

Distribution automation using distribution line carrier systems - General considerations - Guide to identification of data transmission parameters concerning medium and low-voltage distribution mains

BS IEC 61334-1-2:1998 使用配电线路载波系统的自动配电.一般考虑.规范指南

This technical report of type 3 is intended to offer useful information to design a distribution automation system (DAS) using distribution line carrier (DLC) systems for a specific application. For the sake of clarity, the information, useful to design a DAS using DLC systems for a specific application, has been subdivided into three main steps: - the first step concerns the strategic choices determining the architecture of the DAS (clause 3); - the second step deals with the specification of the application processes and the related operational parameters (clause 4); - the third step refers to the facilities that both processing and transmission equipment have to provide in order to cope with the application needs (clause 5). Clause 6 is dedicated to a general valuation of different coupling methods. Clause 7 is instead dedicated to the quality assurance procedures in order to meet the application needs included in a DLC system. Moreover, this technical report contains two annexes: - annex A containing the comparison and evaluation of two different modulation techniques (narrow-band FSK modulation and wide-band modulation); - annex B containing the general outline of a quality plan.

Distribution automation using distribution line carrier systems - General considerations - Guide for specification