33.100.01 电磁兼容性综合 标准查询与下载

GOST IEC/TR 61000-1-6-2014 电磁兼容性 (EMC). 第1-6部分. 总则. 测量不确定性的评定指南

Electromagnetic compatibility (EMC). Part 1-6. General. Guide to assessment of measurement uncertainty

GOST IEC 61326-2-5-2014 "测量, 控制和实验室使用电气设备. EMC要求. 第2-5部分. 依据IEC 61784-1带现场总线接口的现场设备的额外要求, 试验配置, 操作条件以及性能标准"

Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 2-5. Additional requirements, test configuration, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1

GSO ISO 13766:2013 土方机械装置 电磁兼容性

This International Standard provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of earth-moving machinery as defined in ISO 6165. The following electromagnetic phenomena are evaluated: — broadband and narrowband electromagnetic interference; — electromagnetic field immunity test; — broadband and narrowband interference of electrical/electronic subassemblies; — electromagnetic field immunity test of electrical/electronic subassemblies; — electrostatic discharge; — conducted transients.

Earth-moving machinery -- Electromagnetic compatibility

KS C CISPR 16-2-2013 电磁干扰抗扰度测量设备和测量方法 第2部分：电磁干扰和抗扰度测量方法

Specification for radio disturbance and immunity measuring apparatus andmethods－Part 2：Methods of measurement of disturbances and immunity

NF C91-016-2-1/A2:2013 无线电干扰和抗扰的测量设备和方法规范.第2-1部分:干扰和抗扰性的测量方法.传导干扰测量

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1 : methods of measurement of disturbances and immunity - Conducted disturbance measurements

DIN EN 61326-2-5:2013 测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-5部分:详细要求.依据IEC 61784-1(IEC 61326-2-5-2012)标准的带接口现场设备用试验配置、操作条件和性能标准.德文版本EN 61326-2-5-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 617

DIN EN 61326-2-2:2013 测量, 控制和实验室用电气设备. 电磁兼容性 (EMC) 要求. 第2-2部分:特殊要求. 用于便携式试验, 测量和监控低压配电系统用设备的试验配置, 操作条件和性能标准 (IEC 61326-2-2-2012); 德文版本EN 61326-2-2-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in lo

DIN EN 61326-2-1:2013 测量, 控制和实验室使用电气设备. EMC要求. 第2-1部分: 详细要求. EMC无保护应用敏感试验和测量设备的试验配置, 操作条件和性能标准(IEC 61326-2-1-2012); 德文版本EN 61326-2-1-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected

DIN EN 61326-2-3:2013 测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第2-3部分:详细要求.集成或遥感信号调制传感器的试验配置、操作条件和性能标准(IEC 61326-2-3-2012).德文版本EN 61326-2-3-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning (IE

DIN EN 61326-1:2013 测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.第1部分:通用要求(IEC 61326-1-2012).德文版本EN 61326-1-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2012); German version EN 61326-1:2013

DIN EN 61326-2-4:2013 测量、控制和实验室用电气设备.电磁兼容性要求.第2-4部分:详细要求.按照IEC 61557-9标准的绝缘失效定位设备和IEC 61557-8的绝缘监测设备用试验配置、操作条件和性能标准(IEC 61326-2-4-2012).德文版本EN 61326-2-4-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f

NB/T 20218-2013 核电厂安全重要仪表和控制设备电磁兼容性试验要求

本标准规定了核电厂安全重要系统中使用的仪表和控制设备的电磁兼容性试验要求,给出了规定通用试验方法的适用国家标准和IEC标准(主要是GB/T 17626和IEC61000系列标准),并给出了确保满足核安全要求必需的特定应用参数和判据。本标准的规范性部分限于设备在核电厂安装之前的试验,以证明其对电磁骚扰的抗扰度。本标准适用于核电厂安全重要系统中使用的仪表和控制设备的电磁兼容性试验。

Nuclear power plants instrumentation and control important to safety requirements for electromagnetic compatibility testing

DIN EN 55016-1-5:2013 无线电干扰和抗扰测量仪器和方法规范.第1-5部分:无线电干扰和抗扰测量仪器.30 MHz至1000 MHz的天线校准试验场地(CALTS)和REFTS规范和验证规程(CISPR 16-1-5-2003 + A1-2012);德文版本EN 55016-1-5-2004 + A1-2012

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz (CISPR 16-1-5:2003 + A1

NF C46-050-2-3*NF EN 61326-2-3:2013 测量、控制和实验室用电气设备.电磁兼容性要求.第2-3部分:详细要求.有综合或遥感信号作用的传感器的试验结构,操作条件和性能标准

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3 : particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

NF C46-050-2-5*NF EN 61326-2-5:2013 测量, 控制和实验室用电气设备 - 电磁兼容性 (EMC) 要求 - 第2-5部分: 特殊要求 - 带IEC 61784-1规定现场总线接口的设备的试验配置, 操作条件和性能标准

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5 : particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1

DIN EN 55016-1-4:2013 无线电干扰和抗扰测量仪及方法用规范.第1-4部分:无线电干扰和抗扰测量仪.辐射干扰测量用天线和试验场地(IEC/CISPR 16-1-4-2010+Cor.1-2010+A1-2012).德文版本EN 55016-1-4-2010+A1-2012

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (CISPR 16-1-4:2010 + Cor. 1:2010 + A1:2012); Ge

NF C91-016-1-4/A1:2013 无线电干扰和抗扰测量设备和方法的规范.第1-4部分:无线电干扰和抗扰度测量设备.辐射干扰测量用天线和试验地点

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4 : radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

NF C91-016-1-5/A1:2013 无线电干扰和抗干扰测量仪器规范及方法 - 第1-5部分: 无线电干扰与抗干扰测量仪器 - 30 MHz至1000 MHz的天线校准试验场地 (CALTS) 和参考试验场地 (REFTS) 规范和验证规程

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5 : radio disturbance and immunity measuring apparatus - Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz

GSO ISO/TR 16764:2013 电梯、自动扶梯和乘客传送带 干扰和电磁兼容性相关国际规范比较

This Technical Report consists of a comparison of electromagnetic interference/electromagnetic compatibility (EMI/EMC) worldwide standards of interest to the lift industry.

Lifts, escalators and passenger conveyors -- Comparison of worldwide standards on electromagnetic interference /electromagnetic compatibility

SAE ARP935B-2013 控制计划/技术架构文件

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This document contains a ""sample"" Control Plan with explanations as to the intended content of various sections. It also con serve as a sample technical construction file as specified by the European EMC Directive.

Control Plan/Technical Construction File