33.100.10 发射 标准查询与下载
共找到 793 条与 发射 相关的标准，共 53 页
Electromagnetic compatibility(EMC) —Part 6-4: Generic standards —Emission standard for industrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 2022-02-28
- 实施
Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-1: Radio disturbance and immunity measuring apparatus — Measuring apparatus
- ICS
- 33.100.10
- CCS
- 发布
- 2022-02-28
- 实施
This European Standard (EN) has been developed by the European Standardization Organization ETSI (European Telecommunication Standardization Institute) and specifies requirements in the telecommunications sector.
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 22: Specific conditions for ground based aeronautical mobile and fixed radio equipment - Harmonised Standard for ElectroMagnetic Compatibility (Endorsement of the English
- ICS
- 33.100.10
- CCS
- 发布
- 2022-01-00
- 实施
The contents of the corrigendum of January 2022 have been included in this copy.
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
- ICS
- 33.100.10
- CCS
- 发布
- 2021-11-05
- 实施
- 2022-02-05 (7)
This standard contains the German version of the European Standard EN IEC 55036:2020 and is identical with the International Standard CISPR 36:2020. It specifies limits and measurement methods for electromagnetic energy radiated by electric and hybrid road vehicles in the frequen
Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz (CISPR 36:2020); German version EN IEC 55036:2020
- ICS
- 33.100.10
- CCS
- 发布
- 2021-11-00
- 实施
- 2021-11-01
Metallic communication cable test methods – Part 4-5: Electromagnetic compatibility (EMC) – Screening or coupling attenuation – Absorbing clamp method
- ICS
- 33.100.10
- CCS
- 发布
- 2021-10-08
- 实施
- 2021-10-08
What is BS EN IEC 61000-3-2 - Electromagnetic compatibility (EMC) about? Electromagnetic compatibility (EMC) is a key requirement for electromagnetic equipment to function harmoniously, without disrupting other machines. BS EN IEC 61000-3-2 is third part in a series of documents on EMC. BS EN IEC 61000-3-2 deals with the limitation of harmonic currents injected into the public supply system. BS EN IEC 61000-3-2 specifies limits of harmonic components of the input current which can be produced by equipment tested under specified conditions. BS EN IEC 61000-3-2 is applicable to electrical and electronic equipment having a rated input current up to and including 16 A per phase and intended to be connected to public low-voltage distribution systems. Who is BS EN IEC 61000-3-2 - Electromagnetic compatibility (EMC) for? BS EN IEC 61000-3-2 on harmonic emissions for EMC is applicable to manufacturers of equipment that works on electromagnetic RF (such as televisions, medical equipment, radios, X-ray machines). BS EN IEC 61000-3-2 is useful for entities such as: Product design engineers Quality control and testing personnel Regulatory and safety authorities Why should you use BS EN IEC 61000-3-2 - Electromagnetic compatibility (EMC) ? BS EN IEC 61000-3-2 guidelines help you to ...
Electromagnetic compatibility (EMC) - Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase)
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
Metallic cables and other passive components test methods – Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with triaxial cell
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-21
- 实施
- 2021-09-21
IEC 62153-4-15:2021 is available as IEC 62153-4-15:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62153-4-15:2021 specifies the procedures for measuring with triaxial cell the transfer impedance, screening attenuation or the coupling attenuation of connectors, cable assemblies and components, for example accessories for analogue and digital transmission systems, and equipment for communication networks and cabling. This second edition cancels and replaces the first edition published in 2015.This edition includes the following significant technical changes with respect to the previous edition: a) measurement of coupling attenuation of balanced connectors, assemblies and components with balun and balunless added; b) application of a test adapter was added; c) application of a moveable shorting plane; d) application of the triaxial "absorber" cell; e) correction of test results in the case that the receiver input impedance R is higher than the characteristic impedance of the outer circuit Z2.
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-17
- 实施
- 2021-12-07 (7)
Measurement method for radiated disturbance measurements below 30 MHz (IEC CIS/A/1344/CDV) (english version) (Amendment)
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-15
- 实施
- 2021-09-15
Metallic cables and other passive components test methods – Part 4-7: Electromagnetic compatibility (EMC) – Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies – Triaxial
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-07
- 实施
- 2021-09-07
Intelligent Transport Systems (ITS) - Pre-standardization study on co-channel co-existence between IEEETM- and 3GPP- based ITS technologies in the 5855 MHz-5 925 MHz frequency band
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-00
- 实施
Intelligent Transport Systems (ITS) - Study on Spectrum Sharing between ITS-G5 and LTE-V2X technologies in the 5855 MHz-5 925 MHz band
- ICS
- 33.100.10
- CCS
- 发布
- 2021-09-00
- 实施
Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current ≤16 A per phase) (IEC 61000-3-2:2018/A1:2020)
- ICS
- 33.100.10
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Industrial, scientific and medical equipment -- Radio-frequency disturbance characteristics -- Limits and methods of measurement
- ICS
- 33.100.10
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Electromagnetic compatibility -- Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
- ICS
- 33.100.10
- CCS
- 发布
- 2021-08-09
- 实施
- 2021-08-09
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards -- Emission standard for equipment in residential environments (IEC 61000-6-3:2020)
- ICS
- 33.100.10
- CCS
- 发布
- 2021-08-09
- 实施
- 2021-08-09
The absorbing clamp method is suitable to determine the screening- or the coupling- attenuation of metallic communication cables in the frequency range of 30 MHz to 1000 MHz (2400 MHz), depending on the performance of the clamp. It is an alternative method to the triaxial method
Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method
- ICS
- 33.100.10
- CCS
- K13
- 发布
- 2021-08-01
- 实施
This part of IEC 62153 specifies a method to extrapolate the test results of transfer impedance to higher frequencies and the test results of screening attenuation to lower frequencies when measured with the triaxial set-up in accordance with IEC 62153-4-3, IEC 6215344 [1]1 and I
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin
- ICS
- 33.100.10
- CCS
- 发布
- 2021-08-01
- 实施
Digital Terrestrial TV Transmitters; Harmonised Standard for access to radio spectrum (ETSI EN 302296 V2.2.1 (2021-06))
- ICS
- 33.100.10
- CCS
- 发布
- 2021-08-01
- 实施
- 2021-08-01
