33.100.10 发射 标准查询与下载
共找到 793 条与 发射 相关的标准，共 53 页
This standard contains limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board of vehicles, boats and internal combustion engines against conducted and radiated disturbances produced by components built in the same vehicle. Methods for the measurement of the complete vehicle and for the measurement of components independent from the vehicle are established and limits for the electronmagnetic emission are given. The considered frequency range is 150 kHz to 2500 MHz. This standard defines a numerous sets of limits as the installation location of the component, the construction of the vehicle chassis and the design of the harness can influence the coupling of radio disturbances in the built-in receiver. In relation to the previous edition specifications for the measurement and requirements for the emission of electric and hybrid vehicles during the charging of the battery and for the validation of the ALSE were added.
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers (CISPR 25:2016 + COR1:2017); German version EN 55025:2017 + AC:2017
- ICS
- 33.100.10
- CCS
- L06
- 发布
- 2018-03-00
- 实施
- 2018-03-01
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 2018-02-07
- 实施
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 2018-02-07
- 实施
- 0000-00-00
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
- ICS
- 33.100.10
- CCS
- 发布
- 2018-01-26
- 实施
Electromagnetic compatibility (EMC) - Part 3: Limit - ALL PARTS
- ICS
- 33.100.10
- CCS
- 发布
- 2018-01-08
- 实施
This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which can be produced by equipment tested under specified conditions. This part of IEC 61000 is applicable to electrical and electronic equipment having a rated input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems. Arc welding equipment which is not professional equipment, with a rated input current up to and including 16 A per phase, is included in this document. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this document and can be subject to installation restrictions as indicated in IEC 61000-3-12. The tests according to this document are type tests. For systems with nominal voltages less than but not equal to 220 V (line-to-neutral), the limits have not yet been considered. NOTE The words apparatus, appliance, device and equipment are used throughout this document. They have the same meaning for the purposes of this document.
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
- ICS
- 33.100.10
- CCS
- L06
- 发布
- 2018-01-01
- 实施
Electromagnetic compatibility(EMC) — Part 6-4: Generic standards — Emission standard for industrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Electromagnetic compatibility(EMC)－Part 3-12：Limits－Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and≤75 A per phase
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Electromagnetic compatibility(EMC)－Part 3-2：Limits－Limits for harmonic current emissions(equipment input current ≤ 16 A per phase)
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Industrial, scientific and medical equipment－Radio-frequency disturbance characteristics－Limits and methods of measurement
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Requirements for household appliances, electric tools and similar apparatus－Part 1：Emission
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Electromagnetic compatibility(EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Specification for radio disturbance and immunity measuring apparatus and methods－Part 1-1：Radio disturbance and immunity measuring apparatus－Measuring apparatus
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Electromagnetic compatibility(EMC)－Part 3－11： Limits－ Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems－Equipment with rated current £ 75 A and subjet to conditional connection
- ICS
- 33.100.10
- CCS
- 发布
- 20171229
- 实施
- 20171229
Electromagnetic compatibility(EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and lightindustrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 2017-12-28
- 实施
Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment
- ICS
- 33.100.10
- CCS
- 发布
- 2017-12-28
- 实施
Electromagnetic compatibility(EMC) — Part 6-4: Generic standards — Emission standard for industrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 2017-12-28
- 实施
Electromagnetic compatibility(EMC) — Part 6-4: Generic standards — Emission standard for industrial environments
- ICS
- 33.100.10
- CCS
- 发布
- 2017-12-28
- 实施
Electromagnetic compatibility(EMC) ― Part 3―2： Limits ― Limits for harmonic current emissions(equipment input current ≤ 16 A per phase
- ICS
- 33.100.10
- CCS
- 发布
- 2017-12-28
- 实施
