33.100.20 抗扰度 标准查询与下载

GSO IEC 61000-6-7:2021 电磁兼容性 (EMC) 第6-7部分：通用标准 用于在工业场所的安全相关系统（功能安全）中执行功能的设备的抗扰度要求

IEC 61000-6-7:2014 is intended to be used by suppliers when making claims for the immunity of equipment intended for use in safety-related systems against electromagnetic disturbances. This standard should also be used by designers, integrators, installers, and assessors of safety-related systems to assess the claims made by suppliers. It provides guidance to product committees. This part of IEC 61000 applies to electrical and electronic equipment intended for use in safety-related systems and that is: - intended to comply with the requirements of IEC 61508 and/or other sector-specific functional safety standards; - and intended to be operated in industrial locations as described in 3.1.15. The object of this standard is to define immunity test requirements for equipment in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharge. These requirements apply only to functions intended for use in functional safety applications. Test requirements are specified for each port considered.

Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations

GSO CISPR 35:2021 多媒体设备的电磁兼容性 抗扰度要求

CISPR 35:2016 applies to multimedia equipment (MME) having a rated AC or DC supply voltage not exceeding 600 V. The objectives of this document are: - to establish requirements which provide an adequate level of intrinsic immunity so that the MME will operate as intended in its environment in the frequency range 0 kHz to 400 GHz; and - to specify procedures to ensure the reproducibility of tests and the repeatability of results.

Electromagnetic compatibility of multimedia equipment - Immunity requirements

GSO CISPR 14-2:2021 电磁兼容性 家用电器、电动工具和类似设备的要求 第2部分：抗扰度 产品系列标准

CISPR 14-2:2015 is available as CISPR 14-2:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. CISPR 14-2:2015 deals with the electromagnetic immunity of appliances and similar apparatus for household and similar purposes that use electricity, as well as electric toys and electric tools, the rated voltage of the apparatus being not more than 250 V for single-phase apparatus to be connected to phase and neutral, and 480 V for other apparatus. Apparatus may incorporate motors, heating elements or their combination, may contain electric or electronic circuitry, and may be powered by the mains, by transformer, by batteries, or by any other electrical power source. Apparatus not intended for household use, but which nevertheless may require the immunity level, such as apparatus intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard, as far as they are included in CISPR 14-1. In addition, the following are also included in the scope of this standard: - microwave ovens for domestic use and catering; - cooking hobs and cooking ovens, heated by means of r.f. energy; - (single- and multiple-zone) induction cooking appliances; - appliances for personal care equipped with radiators in the range from UV to IR, inclusive (this includes visible light); - power supplies and battery chargers provided with or intended for apparatus within the scope of this standard. This second edition cancels and replaces the first edition published in 1997, Amendment 1:2001 and Amendment 2:2008. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - 5.1: For ESD tests on contacts of plugs and sockets the note ("The 4 kV contact discharge shall be applied to conductive accessible parts. Metallic contacts, such as in battery compartments or in socket outlets, are excluded from this requirement.") saying that no test on contacts is necessary has been removed. The IEC 61000-4-2 includes a detailed description how to deal with ESD on contacts and other surfaces. Also discharge on HCP and VCP is required by the basic standard IEC 61000-4-2. - 5.3 and 5.4: The tables for tests at D.C. power ports according IEC 61000-4-6 are aligned with the generic standards and are the same for 5.3 and 5.4. - 5.3 and 5.4: For EUT with single mains cable and not other cable, the test set-up as shown in Figure 2 shall be used. The set-up as described in Annex F of IEC 61000-4-6:2013 shall not be used. - 5.5: The IEC 61000-4-22 has been introduced as alternative method for testing radiated immunity. - 5.6: No line-to-earth surges are applied to products which do not have provision for connection to earth.

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

GSO CISPR TR 29:2021 电视广播接收机和相关设备 抗扰特性 客观图像评估方法

This Technical Report describes the algorithms used for objective picture assessment in immunity tests of analogue and digital TV broadcast receivers and associated equipment.

Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment

GSO IEC 61000-4-31:2021 电磁兼容性 (EMC) 第4-31部分：测试和测量技术 交流电源端口宽带传导骚扰抗扰度测试

IEC 61000-4-31:2016 relates to the conducted immunity of electrical and electronic equipment to electromagnetic disturbances coming from intended and/or unintended broadband signal sources in the frequency range 150 kHz up to 80 MHz. It has the status of a basic EMC publication in accordance with IEC Guide 107.

Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test

GSO IEC 61000-4-19:2021 电磁兼容性 (EMC) 第4-19部分：测试和测量技术 测试交流电源端口 2 kHz 至 150 kHz 频率范围内的传导、差模干扰和信号的抗扰度

IEC 61000-4-19:2014 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, differential mode disturbances and signalling in the range 2 kHz up to 150 kHz at a.c. power ports. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of differential mode disturbances and signalling to a.c. power ports. This standard defines: - test waveforms; - range of test levels; - test equipment; - test setup; - test procedures; - and verification procedures. These tests are intended to demonstrate the immunity of electrical and electronic equipment operating at a mains supply voltage up to 280 V (from phase to neutral or phase to earth, if no neutral is used) and a frequency of 50 Hz or 60 Hz when subjected to conducted, differential mode disturbances such as those originating from power electronics and power line communication systems. The immunity to harmonics and interharmonics, including mains signalling, on a.c. power ports up to 2 kHz in differential mode is covered by IEC 61000-4-13. Emissions in the frequency range 2 kHz to 150 kHz often have both differential mode and common mode components. This standard provides immunity tests only for differential mode disturbances and signalling. It is recommended to perform common mode tests as well, which are covered by IEC 61000-4-16. Key words: electromagnetic compatibility, EMC

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

GSO IEC 61000-4-36:2021 电磁兼容性 (EMC) 第4-36部分：测试和测量技术 设备和系统的 IEMI 抗扰度测试方法

IEC 61000-4-36:2014(E) provides methods to determine test levels for the assessment of the immunity of equipment and systems to intentional electromagnetic interference (IEMI) sources. It introduces the general IEMI problem, IEMI source parameters, derivation of test limits and summarises practical test methods. Keywords: EMC, electromagnetic compatibility

Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems

GSO IEC TR 61000-4-35:2021 电磁兼容性 (EMC) 第4-35部分：测试和测量技术 HPEM 模拟器概要

IEC/TR 61000-4-35:2009(E) provides information about extant system-level High-Power Electromagnetic (HPEM) simulators and their applicability as test facilities and validation tools for immunity test requirements in accordance with the IEC 61000 series of standards. HPEM simulators with the capability of conducted susceptibility or immunity testing will be included in a further stage of the project. In the sense of this report the group of HPEM simulators consists of narrow band microwave test facilities and wideband simulators for radiated high power electromagnetic fields. IEC 61000-2-13 defines high power electromagnetic (HPEM) radiated environments as those with a peak power density that exceeds 26 W/m2 (100 V/m or 0,27 A/m). This part of IEC 61000 focuses on a sub-set of HPEM simulators capable of achieving much higher fields. Therefore, the HPEM radiated environments used in this document are characterized by a peak power density exceeding 663 W/m2 (500 V/m or 1,33 A/m). The intention of this report is to provide the first detailed listing of both narrowband (hypoband) and wideband (mesoband, sub-hyperband and hyperband) simulators throughout the world. HEMP simulators are the subject of a separate compendium (IEC 61000-4-32) and thus are outside the scope of this Technical Report. After an introduction, a general description of HPEM simulators, as listed in this Technical Report, is presented. A database has been created by collecting information from simulator owners and operators and this data is presented for the technical characterization of the test facilities. In addition, some important commercial aspects, such as availability and operational status, are also addressed.

Electromagnetic compatibility (EMC) - Part 4-35: Testing and measurement techniques - HPEM simulator compendium

GSO IEC TR 61000-4-38:2021 电磁兼容性 (EMC) 第4-38部分：测试和测量技术 电压波动和闪烁合规性测试系统的测试、验证和校准协议

IEC TR 61000-4-38:2015(E) defines a test protocol for flicker test systems designed to perform compliance tests in accordance with IEC 61000-3-3 and IEC 61000-3-11. It is intended to provide test system manufacturers and testing laboratories with systematic methods to determine if the flicker test system meets the IEC design specifications for a wide range of voltage fluctuations and fluctuation frequencies, as specified in IEC 61000-4-15:2010, Table 5, that have been observed in product testing. It has the status of a basic EMC publication in accordance with IEC Guide 107.

Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems

GSO IEC TS 61000-5-9:2021 电磁兼容性 (EMC) 第5-9部分：安装和缓解指南 HEMP 和 HPEM 的系统级敏感性评估

IEC/TS 61000-5-9:2009(E) is to present a methodology to assess the impact of High-altitude Electromagnetic Pulse (HEMP) and High Power Electromagnetic (HPEM) environments on electronic systems. In this context a system refers to a collection of sub-systems, equipment and components brought together to perform a function. The techniques associated with this methodology and their advantages and disadvantages will be presented along with examples of how the techniques can be applied to evaluate the susceptibility of electronic systems such as those found in installations. This work is closely related to the evaluation of EMC system level susceptibility. The purpose of IEC/TS 61000-5-9:2009 is to provide information on available methods for the assessment of system-level susceptibility as a result of HEMP and HPEM environments. The advantages and disadvantages of the methods will be discussed along with examples of how the techniques should be employed. Typical systems have external connections, wired or wireless, and the assessment of these are included within this specification. IEC/TS 61000-5-9:2009 gives general guidance. It does not cover safety issues nor does it conflict with ITU-T efforts concerning the protection of telecommunications equipment. IEC/TS 61000-5-9:2009 has the status of a basic EMC publication in accordance with IEC Guide 107.

Electromagnetic compatibility (EMC) - Part 5-9: Installation and mitigation guidelines - System-level susceptibility assessments for HEMP and HPEM

PN-EN IEC 61000-4-3-2021-06 E 电磁兼容性（EMC）- 第 4-3 部分：测试和测量技术 - 辐射、射频、电磁场抗扰度测试（IEC 61000-4-3:2020）

Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques -- Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2020)

LST EN 60601-1-2/A1-2021 医用电气设备 第 1-2 部分：基本安全和基本性能的一般要求 并列标准：电磁干扰 要求和测试（IEC 60601-1-2:2014/A1:2020）

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests (IEC 60601-1-2:2014/A1:2020)

LST EN IEC 55014-2:2021 电磁兼容性 家用电器、电动工具和类似设备的要求 第2部分：抗扰度 产品系列标准（CISPR 14-2:2020）

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard (CISPR 14-2:2020)

CSA IEC 61000-4-3021 电磁兼容性 (EMC) 第4-3部分：测试和测量技术 辐射、射频、电磁场抗扰度测试

1 Scope and object This part of IEC 61000 is applicable to the immunity requirements of electrical and electronic equipment to radiated electromagnetic energy. It establishes test levels and the required test procedures. The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to radiated, radio-frequency electromagnetic fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. NOTE 1 As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products. This part deals with immunity tests related to the protection against RF electromagnetic fields from any source. Particular considerations are devoted to the protection against radio-frequency emissions from digital radiotelephones and other RF emitting devices. NOTE 2 Test methods are defined in this part for evaluating the effect that electromagnetic radiation has on the equipment concerned. The simulation and measurement of electromagnetic radiation is not adequately exact for quantitative determination of effects. The test methods defined are structured for the primary objective of establishing adequate repeatability of results at various test facilities for qualitative analysis of effects. This standard is an independent test method. Other test methods may not be used as substitutes for claiming compliance with this standard.

Electromagnetic compatibility (EMC) — Part 4-3: Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test

OVE EN IEC 61000-4-5/AC:2021 电磁兼容性（EMC） 第 4-5 部分：测试和测量技术 浪涌抗扰度测试（勘误）（德文版）

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (Corrigendum) (german version)

CSA IEC 61000-4-3:2021 电磁兼容性（EMC） 第 4-3 部分：测试和测量技术 辐射、射频、电磁场抗扰度测试（采用 IEC 61000-4-3:2006，第 3 版：2006 与修正案 1:2007 和修正案 2 合并:2010）

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (Adopted IEC 61000-4-3:2006, edition 3:2006 consolidated with amendment 1:2007 and amendment 2:2010)

ITU-T K.56-2021 保护无线电基站免受闪电放电

Protection of radio base stations against lightning discharges

OVE IEC TR 61547-1:2021 一般照明用设备 EMC 抗扰度要求 第1部分：一种客观的光闪烁计和电压波动抗扰度测试方法（IEC TR 61547-1:2020）（德文版）

Equipment for general lighting purposes - EMC immunity requirements - Part 1: An objective light flickermeter and voltage fluctuation immunity test method (IEC TR 61547-1:2020) (german version)

DIN EN 61000-4-5 Berichtigung 1:2021 电磁兼容(EMC). 第4-5部分: 试验和测量技术. 浪涌抗扰度试验(IEC 61000-4-5-2014 + A1-2017); 德文版 EN 61000-4-5-2014 + A1-2017; 勘误1

This Corrigendum serves for the correction of the second paragraph in 6.4.2 of DIN EN 61000-4-5 (VDE 0847-4-5):2009-03 which deviates from the relevant text in the underlying European Standard EN 61000-4-5:2014 + A1:2017 or the International Standard IEC 61000-4-5:2014 and its Am

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (IEC 61000-4-5:2014 + A1:2017); German version EN 61000-4-5:2014 + A1:2017; Corrigendum 1

DIN EN 61547 Beiblatt 1:2021 一般照明设备. EMC抗扰度要求; 补编1: 客观光闪烁计和电压波动抗扰度试验方法(IEC TR 61547-1-2020)

This document is spart of IEC 61547 series and describes an objective light flickermeter, which can be applied for, amongst others, the following purposes: – testing the intrinsic performance of all lighting equipment without voltage fluctuations; – testing the immunity performan

Equipment for general lighting purposes - EMC immunity requirements; Supplement 1: Objective light flickermeter and voltage fluctuation immunity test method (IEC TR 61547-1:2020)