33.180.10 光纤和光缆 标准查询与下载

DIN 58143-4:2021 光纤产品数据表规范 第4部分：光纤束

This document is applicable to the data provided by the manufacturers or suppliers of fiber optical products for image and data transmission (distances up to 100 m) as well as for transmission of light and optical radiation in the near infrared and ultraviolet spectral range. The

Data sheet specification of fibre optic products - Part 4: Fibre optic bundles; Text in German and English

EN IEC 61753-085-02:2021 光纤互连设备和无源元件 性能标准 第 085-02 部分：C 类非连接器单模尾纤 CWDM 设备 室内受控环境

IEC 61753-085-02:2021 contains the minimum initial test and measurement requirements and severities which a fibre-optic pigtailed coarse wavelength division multiplexing (CWDM) device satisfies in order to be categorised as meeting the requirements of category C (indoor controlled environment), as defined in Annex A of IEC 61753-1:2018. CWDM is defined in IEC 62074‑1. This first edition cancels and replaces IEC 61753-085-2 published in 2008. This edition constitutes a technical revision. This edition includes the following specific technical change with respect to IEC 61753-085-2: change of test conditions harmonizing with IEC 61753-1:2018.

Fibre optic interconnecting devices and passive components - Performance standard - Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C - Indoor controlled environment

LST EN IEC 60794-1-403:2021 光纤电缆 第 1-403 部分：通用规范 基本光缆测试程序 电气测试方法 电缆金属元件的电气连续性测试，方法 H3（IEC 60794-1-403:2021）

Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3 (IEC 60794-1-403:2021)

OVE EN IEC 60793-2-10/A1:2021 光纤 第 2-10 部分：产品规范 A1 类多模光纤的分规范（IEC 86A/2121/CDV）（修正案）（英文版）

Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (IEC 86A/2121/CDV) (Amendment) (english version)

BS EN IEC 61753-085-02:2021 光纤互连设备和无源元件 性能标准 C类非连接器化单模尾纤CWDM设备室内控制环境

Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode pigtailed CWDM devices for category C. Indoor controlled environment

BS IEC 61753-085-02:2021 光纤互连设备和无源元件 性能标准 C类非连接器化单模尾纤CWDM设备室内控制环境

Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode pigtailed CWDM devices for category C. Indoor controlled environment

PN-EN IEC 60794-2-31-2019-11/A1-2021-07 E 光纤电缆 第2-31部分：室内电缆 室内布线用光纤带状电缆详细规范（IEC 60794-2-31:2019/A1:2020）

Optical fibre cables--Part 2-31: Indoor cables--Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2019/A1:2020)

LST EN IEC 60794-4-30:2021 光缆 第 4-30 部分：沿电力线的架空光缆 光相导体（OPPC）光缆系列规范（IEC 60794-4-30:2021）

Optical fibre cables - Part 4-30: Aerial optical cables along electrical power lines - Family specification for optical phase conductor (OPPC) optical cables (IEC 60794-4-30:2021)

LST EN IEC 60794-3-70:2021 光缆 第 3-70 部分：室外光缆 用于快速/多路部署的室外光缆系列规范（IEC 60794-3-70:2021）

Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment (IEC 60794-3-70:2021)

PN-EN IEC 60794-2-21-2019-11/A1-2021-07 E 光缆--第2-21部分：室内光缆--室内布线用多芯光配线电缆详细规范（IEC 60794-2-21:2019/A1:2020）

Optical fibre cables--Part 2-21: Indoor cables--Detailed specification for multi-fibre optical distribution cables for use in premises cabling (IEC 60794-2-21:2019/A1:2020)

PN-EN IEC 60794-2-11-2019-11/A1-2021-07 E 光纤电缆 第 2-11 部分：室内电缆 室内布线用单工和双工电缆的详细规范（IEC 60794-2-11:2019/A1:2020）

Optical fibre cables--Part 2-11: Indoor cables--Detailed specification for simplex and duplex cables for use in premises cabling (IEC 60794-2-11:2019/A1:2020)

IEC 60794-1-402:2021 光缆.第1-402部分:总规范.基本光缆试验程序.电气试验方法.雷电试验（OPGW OPPC和OPAC） 方法H2

Optical fibre cables - Part 1-402: Generic specification - Basic optical cable test procedures - Electrical test methods - Lightning test (for OPGW, OPPC and OPAC), Method H2

T/ZZB 2158-2021 现场组装式光纤免熔物理连接器

本文件规定了现场组装式光纤免熔物理连接器（以下简称免熔物理连接器）的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于现场组装式光纤免熔物理连接器及配套工具。

Field-mountable optical fiber melting-free physical connectors

BS EN IEC 60794-1-403:2021 光缆. 第1-403部分: 总规范. 基本光缆试验规程. 电气试验方法. 电缆金属元件的电气连续性试验. 方法H3

Optical fibre cables. Generic specification. Basic optical cable test procedures. Electrical test methods. Electrical continuity test of cable metallic elements, method H3

PN-EN IEC 60794-6-20-2021-07 E 光纤电缆 第 6-20 部分：室内-室外电缆 阻燃户外电缆系列规范（IEC 60794-6-20:2020）

Optical fibre cables - Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables (IEC 60794-6-20:2020)

GSO IEC 60793-2-70:2021 光纤 第2-70部分：产品规格 保偏光纤截面规格

IEC 60793-2-70: 2017 This part of IEC 60793 is applicable to optical fibre types D1, D2, D3, as described in Table 1. These fibres are polarization-maintaining fibre types, and are used or can be incorporated in information transmission equipment and optical fibre cable. These fibres are available for use in optical transport networks. Three types of requirements apply to these fibres: - general requirements defined in IEC 60793-2; - specific requirements common to the category D polarization-maintaining fibres covered in this document and which are given in Clause 4; - particular requirements applicable to individual fibre types or specific applications, which are defined in Annexes A to C. Table 1 – Categories of glass core/glass clad polarization-maintaining fibres Category Type Description D1 Polarization-maintaining fibre suitable for use at 980 nm This category of polarization-maintaining fibre is optimised for polarization-maintaining ability in the 980 nm region. This fibre is used for erbium-doped fibre amplifier. D2 Polarization-maintaining fibre suitable for use at 1 310 nm This category of polarization-maintaining fibre is optimised for polarization-maintaining ability and connection property of category B fibres in the 1 310 nm region. D3 Polarization-maintaining fibre suitable for use at 1 550 nm This category of polarization-maintaining fibre is optimised for polarization-maintaining ability and connection property of category B fibres in the 1 550 nm region.

Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres

GSO IEC 60794-1-22:2021 光缆 第1-22部分：通用规范 基本光缆测试程序 环境测试方法

IEC 60794-1-22:2017 is available as IEC 60794-1-22:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60794-1-22:2017 defines test procedures to be used in establishing uniform requirements for the environmental performance of: - optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and - cables having a combination of both optical fibres and electrical conductors. Throughout this document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements and definitions. This second edition cancels and replaces the first edition published in 2012. It constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition: - new test method designation F16 – Compound flow (drip) [E14 in IEC 60794-1-21]; - new test method F17 – Cable shrinkage test (fibre protrusion); - new test method F18 – Mid-span temperature cycling test. Keywords: optical fibre cables for use with telecommunication equipment

Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods

GSO IEC 60794-1-31:2021 光缆 第1-31部分：通用规范 光缆元件 光纤带

IEC 60794-1-31:2018 which is a generic specification, covers optical fibre ribbons. Requirements which are described in this part apply to optical fibre ribbon cables for use with telecommunication equipment and devices employing similar techniques, in particular optical fibre cables in IEC 60794-2 for indoor use and in IEC 60794-3 for outdoor use. Detailed specifications for each application are given in IEC 60794-2 and IEC 60794-3. Keywords: optical fibre ribbons

Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon

GSO IEC 60793-1-60:2021 光纤 第1-60部分：测量方法和测试程序 拍长

IEC 60793-1-60:2017 defines test methods for both the phase beat length, and the group beat length. These two parameters are defined differently, and will give different results depending on the type of polarization-maintaining (PM) fibre. The phase beat length is the relevant parameter for the fibres ability to maintain a high extinction ratio. This is described in more details in Annexes A and B.

Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length

IEC 60794-1-401:2021 光纤电缆 第 1-401 部分：通用规范 基本光缆测试程序 电气测试方法 短路测试（用于 OPGW、OPPC 和 OPAC），方法 H1

This part of IEC 60794 applies to the short-circuit test intended to assess the performance of an optical ground wire (OPGW) or optical phase conductor (OPPC) under typical short-circuit, or the impact on the performance of optical attached cable (OPAC) under short-circuit curren

Optical fibre cables - Part 1-401: Generic specification - Basic optical cable test procedures - Electrical test methods - Short-circuit test (for OPGW, OPPC and OPAC), Method H1