33.180.99 其他光纤设备 标准查询与下载

YD/T 2150-2020 光缆分纤箱

Optical fiber cable distribution box

IEC TR 63099-2:2020 无线电通信用传输设备.电磁场测量用光纤无线电技术.第2部分:电场传感用光纤无线电技术

Transmitting equipment for radiocommunication - Radio-over-fibre technologies for electromagnetic-field measurement - Part 2: Radio-over-fibre technologies for electric-field sensing

BS EN IEC 61757-1-1:2020 光纤传感器 应变测量 基于光纤布拉格光栅的应变传感器

What is BS EN IEC 61757 ‑ 1 ‑ 1 about?    BS EN IEC 61757 is a series on fibre optic sensors. BS EN IEC 61757 ‑ 1 ‑ 1 defines detailed specifications for fibre optic sensors using one or more fibre Bragg gratings (FBG) as the sensitive element for strain measurements.   BS EN IEC 61757 ‑ 1 ‑ 1 specifies the most important features and characteristics of a fibre optic sensor for strain measurements, based on the use of an FBG as the sensitive element, and defines the procedures for their determination. BS EN IEC 61757 ‑ 1 ‑ 1 specifies basic performance parameters and characteristics of the corresponding measuring instrument to read out the optical signal from the FBG. BS EN IEC 61757

Fibre optic sensors - Strain measurement. Strain sensors based on fibre Bragg gratings

EN IEC 61757-1-1:2020 光纤传感器 第 1-1 部分：应变测量 基于光纤布拉格光栅的应变传感器

IEC 61757-1-1:2020 is available as IEC 61757-1-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61757-1-1:2020 defines detail specifications for fibre optic sensors using one or more fibre Bragg gratings (FBG) as the sensitive element for strain measurements. Generic specifications for fibre optic sensors are defined in IEC 61757. This document specifies the most important features and characteristics of a fibre optic sensor for strain measurements, based on use of an FBG as the sensitive element, and defines the procedures for their determination. Furthermore, it specifies basic performance parameters and characteristics of the corresponding measuring instrument to read out the optical signal from the FBG. This document refers to the measurement of static and dynamic strain values in a range of frequencies. A blank detail specification is provided in Annex B. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition: - update of cited standards; - clarification of definitions and test specifications.

Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings

YD/T 3132.3-2020 光纤入户放装器材 第3部分：线槽及线槽配件

Fiber optic home installation equipment Part 3: Trunking and trunking accessories

IEC 61757-1-1:2020 光纤传感器第1-1部分:应变测量基于光纤布拉格光栅的应变传感器

Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings

IEC 61757-1-1:2020 RLV 光纤传感器第1-1部分:应变测量基于光纤布拉格光栅的应变传感器

Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings

YD/T 3287.4-2019 智能光分配网络 接口测试方法 第4部分：智能光分配网络管理系统与OSS的接口

Intelligent optical distribution network interface test method Part 4: Interface between intelligent optical distribution network management system and OSS

T/CAICI 17-2019 平面光波导型光分路器规范

本标准规定了平面光波导型光分路器的术语和定义、分类及型号、技术要求、试验方法、标志、包装、运输、贮存等内容。

Specification for planar optical waveguide type optical splitter

T/CAICI 18-2019 室外光缆接头盒技术规范

本部分规定了室外光缆接头盒的产品分类和命名、要求、试验方法、检验规则、标志、包装、运输和贮存要求。 本部分适用于通信用光缆线路中架空、管道(隧道)、直埋等敷设方式安装使用的光缆接头盒，接入网用光电混合缆可参照使用。

Outdoor optical cable splice box technical specification

T/CAICI 16-2019 光缆交接箱智能门禁系统技术规范

本标准规定了光缆交接箱智能门禁（以下简称智能门禁）总体要求，包括智能门禁系统的组成及接口、智能门禁、智能门禁管理应用和智能门禁管理系统等要求。 本标准规定了智能门禁的术语和定义、系统组成、接口和功能、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于光缆交接箱的智能门禁系统，其它有智能门禁应用需求的设施可参考使用。

Technical specification for intelligent access control system of optical cable transfer box

T/CAICI 19-2019 通信用预制成端引入光缆组件技术规范

本部分规定预制成端组件( 以下简称组件)的产品分类、要求、试验方法，以及检验规则、标志、包装、运输和储存。 本部分适用于在工厂预成端了光纤活动连接器( 以下简称连接器)插头的引入光缆预制成端组件。

Technical specifications for prefabricated drop cable assemblies for communication

IEC 62343-1:2019 动态模块.第1部分:性能标准.一般条件

Dynamic modules - Part 1: Performance standards - General conditions

KS C IEC 61757-1-1:2019 光纤传感器第1-1部分:应变测量基于光纤布拉格光栅的应变传感器

Fibre optic sensors — Part 1-1: Strain measurement — Strain sensors based on fibre Bragg gratings

KS C IEC 61757-1-1-2019 光纤传感器第1-1部分:应变测量基于光纤布拉格光栅的应变传感器

Fibre optic sensors — Part 1-1: Strain measurement — Strain sensors based on fibre Bragg gratings

T/CAICI 8-2019 光纤配线架技术规范

本标准规定了光纤配线架（以下简称 ODF)的定义、分类组成、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于 ODF，其它类似光配线设备（如光纤配线箱）也可参照执行。

Optical Fiber Distribution Frame Technical Specifications

T/CAICI 9-2019 光缆分纤箱技术规范

本标准规定了光缆分纤箱（以下简称分纤箱）的定义、分类、要求、试验方法、检验规则、标志、 包装、运输和贮存。 本标准适用于露天、楼道、室内等场所使用的光缆分纤箱。

Optical fiber distribution box technical specification

BS EN IEC 62149-10:2018 光纤有源组件和设备 性能标准 第 10 部分：用于移动前传的光纤无线电 (RoF) 收发器

What is BS EN IEC 62149 ‑ 10 - Fibre optic active components and devices about?    BS EN IEC 62149 is a series on fibre optic active components and devices. Active devices are electronic components made up of semiconductor materials that actively manipulate electrons to perform the intended function. BS EN IEC 62149 ‑ 10 covers the performance specification for radio-over-fibre (RoF) transceivers used for mobile fronthaul systems.    BS EN IEC 62149 ‑ 10 contains a definition of the product p...

Fibre optic active components and devices - Performance standards - Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul

DL/T 1899.1-2018 电力架空光缆接头盒 第1部分：光纤复合架空地线接头盒

Splice closures for electrical overhead optical fiber cables Part 1: Optical fiber composite splice closures for overhead ground wires

DL/T 1899.3-2018 电力架空光缆接头盒 第3部分：光纤复合架空相线接头盒

Splice closures for overhead optical cables for electric power - Part 3: Optical fiber composite overhead phase splice closures