33.180.99 其他光纤设备 标准查询与下载

YD/T 2908-2015 基于域名系统(DNS)的IP安全协议(IPSec)认证密钥存储技术要求

Technical requirements for IP Security Protocol (IPSec) authentication key storage based on Domain Name System (DNS)

YD/T 2795.1-2015 智能光分配网络 光配线设施 第1部分：智能光配线架

Intelligent optical distribution network optical wiring facilities Part 1: Intelligent optical distribution frame

YD/T 2795.3-2015 智能光分配网络 光配线设施 第3部分：智能光缆分纤箱

Intelligent optical distribution network optical wiring facilities Part 3: Intelligent optical cable distribution box

IEC TR 62343-6-7:2015 动态模块.第6-7部分:设计指南.光信道监视器

Dynamic modules - Part 6-7: Design guide - Optical channel monitor

GSO IEC 62134-1:2014 无源光纤熔接装置和组件 光纤外壳 第1部分：通用规范

This part of IEC 62134 establishes uniform generic requirements for fibre optic closures. This standard does not cover test and measurement procedures, which are described in IEC 61300 series.

Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification

GSO IEC 61757-1:2014 光纤传感器 第1部分：通用规范

This part of IEC 61757 is a generic specification covering optical fibres, components and subassemblies as they pertain specifically to fibre optic sensing applications. It has been designed to be used as a common working and discussion tool by the vendor of components and subassemblies intended to be integrated in fibre optic sensors, as well as by designers, manufacturers and users of fibre optic sensors independent of any application or installation. The objective of this generic specification is to define, classify and provide the framework for specifying fibre optic sensors, and their specific components and subassemblies. The requirements of this standard apply to all related sectional, family, and detail specifications. Sectional specifications will contain requirements specific to sensors for particular quantities subject to measurement. Within each sectional specification, family and detail specifications contain requirements for a particular style or variant of a fibre optic sensor of that sectional specification. A fibre optic sensor contains an optical or optically powered sensing element in which the information is created by reaction of light to a measurand. The sensing element can be the fibre itself or an optically powered element inserted along the optical path. In a fibre optic sensor, one or more light parameters are directly or indirectly modified by the measurand somewhere in the optical path, contrary to an optical data link where the information is merely transmitted from the transmitter to the receiver. Generic tests or measurement methods are defined for specified attributes. Where possible, these definitions are by reference to an IEC standard – otherwise the test or measurement method is outlined in the relevant sectional, family and/or detail specification. Annex A gives examples of fibre optic sensors to better illustrate the classification scheme. The examples given are illustrative only and are not limitative, nor do they constitute a recommendation or endorsement of a particular transduction principle.

Fibre optic sensors - Part 1: Generic specification

DIN 58143-5:2014 光纤产品的数据单规范.第5部分:冷光源

Data sheet specification of fibre optic products - Part 5: Cold light sources; Text in German and English

DIN EN 62496-2-4:2014 光学电路板. 基本试验和测量程序. 第2-4部分:不带输入/输出纤维光电路板的光传输试验 (IEC 62496-2-4-2013); 德文版本EN 62496-2-4-2013

Optical circuit boards - Basic test and measurement procedures - Part 2-4: Optical transmission test for optical circuit boards without input/output fibres (IEC 62496-2-4:2013); German version EN 62496-2-4:2013

BS EN 62148-17:2014 纤维光学有源元件和器件. 包装和接口标准. 带双同轴射频连接器的发射器和接收器

Fibre optic active components and devices. Package and interface standards. Transmitter and receiver components with dual coaxial RF connectors

BS PD IEC/TS 62661-2-1:2013 光学底板. 产品规范. 应用于光纤电路板和多核直角光连接器的光学底板

Optical backplanes. Product specification. Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors

EN 62148-17:2014 光纤有源元件和设备 封装和接口标准 第17部分：带有双同轴 RF 连接器的发射器和接收器元件

IEC 62148-17:2013 covers physical interface specification of transmitter and receiver components with dual coaxial RF connectors. Keywords: interface specification, transmitter and receiver components, dual coaxial RF connectors.

Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors

GSO IEC 62343-5-1:2013 动态模块 测试方法 第5-1部分：动态增益倾斜均衡器 响应时间测量

IEC 62343-5-1:2014(E) contains the measurement method of gain tilt settling time for a dynamic gain tilt equalizer (DGTE) to change its gain tilt from an arbitrary initial value to a desired target value. This second edition cancels and replaces the first edition published in 2009. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: change in the title and changes in performance parameter names. Keywords: dynamic gain tilt equalizer (DGTE)

Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement

NF C93-930-2-4*NF EN 62496-2-4:2013 光电路板 基本试验和测量规程 第2-4部分 不带输入/输出纤维光电路板的光传输试验

Optical circuit boards - Basic test and measurement procedures - Part 2-4 : optical transmission test for optical circuit boards without input/output fibres

DIN CLC/TR 50510:2013 终端用户光纤通道.FTTx光纤网建造导则.德文版本CLC/TR 50510-2012

Fibre optic access to end-user - A guideline to building of FTTx fibre optic network; German version CLC/TR 50510:2012

BS EN 62496-2-4:2013 光学电路板. 基本试验和测量程序. 不带输入/输出纤维光电路板的光传输试验

Optical circuit boards. Basic test and measurement procedures. Optical transmission test for optical circuit boards without input/output fibres

IEC TS 62661-2-1:2013 光学背板.产品规格.第2-1部分:利用光纤电路板和多芯直角光连接器的光纤背板

Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors

DS/EN 62343-1-3:2013 动态模块 第 1-3 部分：性能标准 动态增益倾斜均衡器（非连接器）

This part of IEC 62343 contains the guideline minimum initialization test and measurement requirements and severities, for a dynamic gain tilt equalizer (DGTE). A DGTE is used an an optical amplifier, which operates in C-band and/or L-band, to control the

Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)

DIN EN 61757-1:2013 纤维光学传感器.第1部分:总规范(IEC 61757-1-2012).德文版本EN 61757-1-2012

Fibre optic sensors - Part 1: Generic specification (IEC 61757-1:2012); German version EN 61757-1:2012

ANSI/UL 1577-2013 光隔离器的安全性标准(提案日期 2012年8月3日)

Standard for Safety for Optical Isolators (Proposal Dated August 3, 2012)

LST EN 61757-1-2012 光纤传感器 第1部分：通用规范（IEC 61757-1:2012）

Fibre optic sensors -- Part 1: Generic specification (IEC 61757-1:2012)