33.180.99 其他光纤设备 标准查询与下载

NF C93-800-1:2012 光纤传感器.第1部分:通用规范

Fibre optic sensors - Part 1: generic spécification

DS/EN 50411-2-4:2012 光纤通信系统中使用的光纤组织器和闭合装置 产品规格 第 2-4 部分：密封圆顶光纤接头闭合装置类型 1，用于类别 S 和 A

1.1 Product definition This specification contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements of a fully installed splice closure in order for it to be categorised as an EN standard product.1.2 O

Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A

DS/EN 61757-1:2012 光纤传感器 第1部分：通用规范

This part of IEC 61757 is a generic specification covering optical fibres, components and subassemblies as they pertain specifically to fibre optic sensing applications. It has beendesigned to be used as a common working and discussion tool by the vendor

Fibre optic sensors - Part 1: Generic specification

IEC 86/439/DTS:2012 IEC/TS 62661-2-1,第1版:光纤背板.产品规格.第2-1部分:利用光纤电路板和多芯直角光连接器的光纤背板

IEC/TS 62661-2-1, Ed. 1: Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors

BS EN 61757-1:2012 光纤传感器.总规范

Fibre optic sensors. Generic specification

DIN EN 62496-2-1:2012 光学电路板.第2-1部分:测量.光纤衰减和隔离(IEC 62496-2-1-2011).德文版本EN 62496-2-1-2011

Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation (IEC 62496-2-1:2011); German version EN 62496-2-1:2011

IEC 61757-1:2012 光纤传感器.第1部分:总规范

This part of IEC 61757 is a generic specification covering optical fibres@ components and subassemblies as they pertain specifically to fibre optic sensing applications. It has been designed to be used as a common working and discussion tool by the vendor of components and subassemblies intended to be integrated in fibre optic sensors@ as well as by designers@ manufacturers and users of fibre optic sensors independent of any application or installation. The objective of this generic specification is to define@ classify and provide the framework for specifying fibre optic sensors@ and their specific components and subassemblies. The requirements of this standard apply to all related sectional@ family@ and detail specifications. Sectional specifications will contain requirements specific to sensors for particular quantities subject to measurement. Within each sectional specification@ family and detail specifications contain requirements for a particular style or variant of a fibre optic sensor of that sectional specification. A fibre optic sensor contains an optical or optically powered sensing element in which the information is created by reaction of light to a measurand. The sensing element can be the fibre itself or an optically powered element inserted along the optical path. In a fibre optic sensor@ one or more light parameters are directly or indirectly modified by the measurand somewhere in the optical path@ contrary to an optical data link where the information is merely transmitted from the transmitter to the receiver. Generic tests or measurement methods are defined for specified attributes. Where possible@ these definitions are by reference to an IEC standard ?C otherwise the test or measurement method is outlined in the relevant sectional@ family and/or detail specification. Annex A gives examples of fibre optic sensors to better illustrate the classification scheme. The examples given are illustrative only and are not limitative@ nor do they constitute a recommendation or endorsement of a particular transduction principle.

Fibre optic sensors - Part 1: Generic specification

DIN IEC/TS 62661-2-1:2011 光学底板.产品规格.第2-1部分:采用光纤电路板和多核直角光学连接器的光学底板(IEC 86/375/CD-2010)

Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors (IEC 86/375/CD:2010)

DIN EN 62496-4:2011 光学电路板.第4部分:接口标准.总则和指南(IEC 62496-4-2011).德文版 EN 62496-4-2011

Optical circuit boards - Part 4: Interface standards - General and guidance (IEC 62496-4:2011); German version EN 62496-4:2011

BS EN 62496-2-1:2011 光学电路板.测量值.光线衰减和隔离

Optical circuit boards. Measurements. Optical attenuation and isolation

DIN EN 61746-1:2011 光时域反射仪(OTDR)校准.第1部分:单模光纤用OTDR(IEC 61746-1-2009);德文版本EN 61746-1-2011

Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres (IEC 61746-1:2009); German version EN 61746-1:2011

DIN EN 61746-2:2011 光时域反射计(OTDR)的校准.第2部分:多模光纤用OTDR(IEC 61746-2-2010);德文版本EN 61746-2-2011

Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres (IEC 61746-2:2010); German version EN 61746-2:2011

DIN EN 62496-2-2:2011 光路板.第2-2部分:测量.光路板的尺寸(IEC 62496-2-2-2011);德文版本EN 62496-2-2-2011

Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards (IEC 62496-2-2:2011); German version EN 62496-2-2:2011

DS/EN 62343-2:2011 动态模块 第2部分：可靠性鉴定

This International Standard applies to dynamic modules and devices (DMs) which are commercially available. Examples are tunable chromatic dispersion compensators, reconfigurable optical cross-connects, and dynamic channel equalizers. (Optical amplifiers are not included in this list, but are treated in IEC 61291-5-2.)For reliability qualification purposes, some information about the internal components, parts, interconnections is needed; these internal parts are treated as black boxes. This standard gives requirements for the evaluation of DM reliability by combining the reliability of such internal black boxes.The objectives of this International Standard

Dynamic modules - Part 2: Reliability qualification

YD/T 778-2011 光纤配线架

本标准规定了光纤配线架（以下简称ODF）的定义、命名、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于ODF。其它类似光配线设备（如光纤配线箱）也可参照执行。

Optical fiber distribution frame

YD/T 2281-2011 光纤插座盒

本标准规定了光纤插座盒的分类和命名、要求、试验方法、检验规则和包装、标志、运输和贮存。 本标准适用于各种光纤到户、光纤到办公室、光纤到大楼等用户端的光纤插座盒。

Fibre optic socket-outlets case

YD/T 814.5-2011 光缆接头盒 第5部分：深海光缆接头盒

本部分规定了深海光缆接头盒的术语和定义、型号、要求、试验方法、检验规则及标志、包装、运输和贮存。 本部分适用于工作水深不超过8000m的两条深海光缆之间接续或转换用直通式接头盒。本部分不适用于柔性接头和分歧接头盒。

Closure for optical cable.Part 5:Closure for deep water submarine optical fibre cables

NF C93-930-2-2*NF EN 62496-2-2:2011 光电路板.第2-2部分:测量.光学电路板的尺寸.

Optical circuit boards - Part 2-2 : measurements - Dimensions of optical circuit boards.

DS/EN 61746-1:2011 光时域反射计（OTDR）的校准 第1部分：单模光纤的 OTDR

This part IEC 61746 provides procedures for calibrating single-mode optical time domain reflectometers (ODTR). It only covers ODTR measurement errors and uncertainties.

Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres

DS/EN 61746-2:2011 光时域反射计（OTDR）的校准 第2部分：多模光纤的 OTDR

This part of IEC 61746 provides procedures for calibrating multimode optical time domain reflectometers (OTDR). It covers OTDR measurement errors and uncertainties. The test of the laser(s) source modal condition is included as an optional measurement. This standard does not cover correction of the OTDR response.

Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres