35.100.10 物理层 标准查询与下载
共找到 295 条与 物理层 相关的标准，共 20 页
Information technology－High-Performance ParalleI Interface－Part 1：Mechanical, electrical and signalling protocol specification(HIPPI-PH)
- ICS
- 35.100.10
- CCS
- 发布
- 20131217
- 实施
- 20131217
This Technical Report: -classifies problems of P2P networking; -defines taxonomy and concept of managed P2P; -specifies requirements to support managed P2P; -specifies framework for managed P2P; -specifies information flows to support various features of managed P2P. This Technical Report does not define new P2P protocol or P2P-based applications. This Technical Report does not define manageability features for interoperation with conventional P2P-based applications. The goal of this Technical Report is to define a framework to provide manageability to the conventional P2P-based application.
Information technology.Telecommunications and information exchange between systems .Managed P2P: Framework
- ICS
- 35.100.10
- CCS
- L78
- 发布
- 2013-12-01
- 实施
- 2013-12-01
Services for Computer Supported Telecommunications Applications are defined by Standard ECMA-269 and the XML Protocol for those services are defined by Standard ECMA-323. In many cases, applications require only a small subset of the features standardized in CSTA. In a voice browser environment, processing speech (not call control) is usually the major focus of the application. For example, from a CSTA feature perspective, an application may simply need to answer an incoming call and then later clear it. As these speech-centric applications evolve they can use additional, more advanced, features standardized by CSTA that are provided by CSTA-conformant communications platforms. Since ECMA-269 and ECMA-323 are relatively large standards (combined over 1100 pages), it is a challenge for application developers without prior knowledge of the CSTA standards to know where to find basic concepts that they need to understand in order to implement basic CSTA features. This TR illustrates how ECMA-323 can be used in a Voice Browser environment. These concepts illustrated in this TR can be applied to any Voice Browser environment that provides an XML-based read/write messaging interface (i.e. CSTA Service Boundary) that supports asynchronous events from a CSTA conformant communication platform. SALT enabled browsers that implement a ECMA-323 interface for call control using the SALT smex mechanism is an example of a browser with this capability. Throughout this TR the term “ECMA-323 enabled voice browser” is used, in a generic sense, to refer to browser implementation that support a CSTA conformant ECMA-323 interface. Examples are provided that show how ECMA-323 can be used in several different environments such as SALT-enabled browsers and CCXML.
Information technology -- Telecommunications and information exchange between systems -- Using ECMA-323 (CSTA XML) in a Voice Browser Environment
- ICS
- 35.100.10
- CCS
- 发布
- 2013-09-09
- 实施
This part of lSO/IEC 11518 provides a common method for encapsulating lSO/IEC 8802-2 Logical Link Control Protocol Data Units (PDU) on HIPPI.
Information technology -- High-Performance Parallel Interface -- Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
- ICS
- 35.100.10
- CCS
- 发布
- 2013-09-09
- 实施
This part of ISO/IEC 11518 provides the mechanical, electrical and signalling protocol specifications for an efficient simplex high-performance Point-to-Point interface between pieces of data-processing equipment. The interface described in this patt of ISO/IEC 11518 tan be operated at peak data rates of 800 or 1 600 Mbit/s, over distances of up to 25 m by means of topper cabling. A distance-independent signalling protocol allows the average data rates to approach the peak data rates, even over distances longer than specified for the HIPPI-PH. The purpose of this part of ISO/IEC 11518 is to facilitate the development and use of Computer Systems by providing a common interface at the physical and data framing layers. lt provides an efficient interconnection between Computers, high-performance display Systems, and high-performance, intelligent block-transfer peripherals. The interface is optimized for large block transfers.
Information technology -- High-Performance Parallel Interface -- Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
- ICS
- 35.100.10
- CCS
- 发布
- 2013-09-09
- 实施
Information technology - Telecommunications and information exchange between systems - Near Field Communication - Interface and Protocol (NFCIP-1)
- ICS
- 35.100.10
- CCS
- L79
- 发布
- 2013-03
- 实施
Information technology - Telecommunications and information exchange between systems - Managed P2P: Framework
- ICS
- 35.100.10
- CCS
- L78
- 发布
- 2012-12
- 实施
Information technology. Telecommunications and information exchange between systems. Managed P2P: Framework
- ICS
- 35.100.10
- CCS
- 发布
- 2012-11-19
- 实施
- 2012-11-19
Information technology - Telecommunications and information exchange between systems - Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
- ICS
- 35.100.10
- CCS
- L78
- 发布
- 2012-08
- 实施
Information technology - Telecommunications and information exchange between systems - Front-end configuration command for NFC-WI (NFC-FEC)
- ICS
- 35.100.10
- CCS
- L78
- 发布
- 2011-10
- 实施
Information technology－Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- ICS
- 35.100.10
- CCS
- 发布
- 2010-12-29
- 实施
Information technology－Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- ICS
- 35.100.10
- CCS
- 发布
- 2010-12-29
- 实施
Information technology -- Telecommunications and information exchange between systems -- Near Field Communication -- Interface and Protocol(NFCIP-1)
- ICS
- 35.100.10
- CCS
- L79
- 发布
- 2010-10-20
- 实施
Information technology -- Telecommunications and information exchange between systems -- NFCIP-1 -- Protocol Test Methods
- ICS
- 35.100.10
- CCS
- L79
- 发布
- 2010-10-20
- 实施
Information technology -- Telecommunications and information exchange between systems -- Near Field Communication Wired Interface (NFC-WI)
- ICS
- 35.100.10
- CCS
- L78
- 发布
- 2010-10-20
- 实施
ISO/IEC 23917:2005 specifies protocol test methods for ISO/IEC 18092 in addition to those specified in ISO/IEC 22536.
Information technology - Telecommunications and information exchange between systems - NFCIP-1 - Protocol Test Methods
- ICS
- 35.100.10
- CCS
- L79
- 发布
- 2010
- 实施
本标准规定了基于2D-PAM3和4D-PAM5编码方法的距离增强型以太网物理层接口的技术要求，包括功能要求、性能指标、电气特性和环境要求等。 本标准仅适用于在1对或2对3类/5类双绞线上，采用2D-PAM3编码方法；在4对5类双绞线上，采用4D-PAM5编码方法，以10Mbit/s/100Mbit/s速率传输数据的距离增强型以太网接口。
Technical Requirement of Physical Layer for Extended Reach Ethernet based on 2D-PAM3 and 4D-PAM5
- ICS
- 35.100.10
- CCS
- M30
- 发布
- 2009-06-15
- 实施
- 2009-09-01
Information technology－Open systems interconnection－Procedures for the operation of OSI registration authorities－Part 2：Registration procedures for OSI document types
- ICS
- 35.100.10
- CCS
- 发布
- 2008-12-31
- 实施
Information processing systems－Open systems interconnection－Estelle：A formal description technique based on an extended state transition model
- ICS
- 35.100.10
- CCS
- 发布
- 2008-10-31
- 实施
Information technology－Elements of management information related to the OSI Physical Layer
- ICS
- 35.100.10
- CCS
- 发布
- 2008-10-31
- 实施
